2011 MERCEDES-BENZ SPRINTER radio

Radio mode21
Radio mode
Using the steering wheel buttons
+You can switch between station selection
via memory presets and station selection
via frequency on the instrument cluster.
For information on how to do this, see the
vehicle Operator’s Manual.
Set the desired waveband ( page 20).
Switch the display to the Audio menu ( page 17).
Press the & button.
The station search starts in ascending or-
der.
or Press the * button.
The station search starts in descending
order.
Depending on the instrument cluster set-
ting, the station search stops at the next
station which can be received, either pre-
set in the memory or on the waveband.
Tuning in manually
+This function is not available for Weather
Band (WB).
Set the desired waveband ( page 20).
Briefly press the n or ý button on
the radio.
The waveband is searched in the frequen-
cy steps stated above.
Press and hold the n or ý button
on the radio.
The search does not stop at the frequen-
cy steps stated above.
Selecting using the station presets
You can store 5 stations in the AM waveband
and 5 stations in the Weather Band (WB).
For the FM wavebands, a total of 10 fixed sta-
tions and 5 Autostore memory presets can
be used. Using Sound 5
Set the desired waveband ( page 20).
Press one of the buttons from 4 to
D .
The radio selects the stored station.
+With the FM 6–10 range, memory presets
6–10 are also set using buttons 4 to
D . Memory preset location 10 appears
in the display as
FM0.
Using the steering wheel buttons Set the desired waveband ( page 20).
Switch the display to the Audio menu (
page 17).
Press the & or * button.
The stored station is selected.
You can select presets 1–10 using the steer-
ing wheel buttons if: the Sound 5 radio is either in the FM 1–5
or FM 6–10 preset group and
the display is set to "Select station from
memory" (
page 17). Information on
how to set the display can be found in the
vehicle Operator’s Manual.
Scan mode plays each station with ade-
quate reception for around 8 seconds.
After it has run through the stations
twice, the scan stops automatically at the
station you were listening to before the
scan was started.
Starting scan mode Switch to the desired waveband (
page 20).
Press the SC button.
The station search starts.
Scan mode

Radio mode
22
Radio mode
Ending scan mode Press the SC button again.
The station search stops.
You can store stations in the FM, AM and WB
wavebands manually or using Autostore.
Storing manually
Five memory presets are available for each
waveband. Set the station to be stored ( page 20).
Press and hold a button between 4
and D until you hear a tone.
The station will be saved at the button
you have pressed.
Saving using Autostore
+Saving using Autostore is only possible in
the FM-AS waveband.
The radio fills the five memory presets in the
FM-AS waveband with stations in order of re-
ception quality.
If no stations are available, the radio fills all
Autostore locations with the lowest frequen-
cy. Press the FM button repeatedly until the
FM-AS waveband appears.
Press and hold the SC button until you
hear a tone and the Autostore station
search starts. When
AS–Seek disappears, saving is com-
plete.Storing a station

General information
24
CD mode
+This Operator’s Manual describes all fea-
tures, standard or optional, potentially
available for your vehicle at the time of pur-
chase. Please be aware that your vehicle
might not be equipped with all features de-
scribed in this manual.
+Explanation of terminology:
The terms "track" and "file" are used in
this manual to describe a single piece of
music on a CD. "Track" refers to pieces of
music on audio CDs or on MP3 / WMA
CDs. "File" is used for MP3 / WMA CDs
only.
The term "folder" is used to describe file
directories on MP3 / WMA CDs which
contain MP3 / WMA tracks.
+In some cases, the Sound 5 radio may not
be able to play audio CDs with copy protec-
tion.
There may be playback problems when play-
ing copied CDs.
+There are a large variety of discs, disc-
writing software and writers available. This
variety means that there is no guarantee
that the Sound 5 radio will be able to play
discs that you have copied yourself.
There may be playback problems if you play
CDs that you have copied yourself with a
storage capacity of more than 700 MB. CDs
of this type do not conform to currently appli-
cable standards. ! Do not affix stickers or labels to the
discs. They could peel off and damage
the drive. Such damage is not covered by
the New Vehicle Limited Warranty.
! The drive is designed to hold discs which
comply with the EN 60908 standard.
Therefore, you can only use discs with a
maximum thickness of 1.3 mm.
If you insert thicker discs, e.g. those that
contain data on both sides (DVD on one
side and audio data on the other), they
cannot be ejected and they can damage
the CD drive.
Do not use discs with a diameter of 8 cm,
even with an adapter, as this can damage
the drive. Such damage is not covered by
the New Vehicle Limited Warranty.
Only use round discs with a diameter of
12 cm.
Vehicle equipment
General information
$ Risk of injury
The CD drive is a class 1 laser product. There
is a risk of exposure to invisible laser radia-
tion if you open the casing or if the casing is
faulty or damaged.
Do not open the casing. The unit contains no
parts on which you can carry out mainte-
nance. For safety reasons, have any neces-
sary maintenance work carried out by
qualified aftersales technicians only.
$ Risk of accident
In order to avoid distraction which could lead
to an accident, the driver should insert or
eject CDs with the vehicle at a standstill and
operate the Sound 5 radio only if permitted
by road, weather and traffic conditions.
Bear in mind that at a speed of just 30 mph
(50 km / h), your vehicle is covering a dis-
tance of 44 feet (14 m) every second.

CD mode
26
CD mode
Handle discs carefully to prevent play-
back problems.
Avoid getting scratches, fingerprints and
dust on discs.
Do not affix stickers to the discs.
To label discs, only use a pen designed
for this purpose.
Clean discs from time to time with a con-
ventional cleaning cloth. Do not wipe
them with a circular motion, but only in
straight lines from the center outwards.
Place discs back in their cases after use.
Protect discs from heat and direct sun-
light.
Insert a CD.
or Press the & button.
+In some cases, the system may not be
able to play audio CDs with copy protec-
tion.
Insert the CD into the disc slot with the
printed side upwards.
The CD is drawn automatically into the
slot, and playback of the first track starts.
+If you insert the CD into the slot when the
unit is switched off, the device will auto-
matically switch on.
The length of time required to read the data (
LOADING) depends on various factors (type
of media, number of titles, whether copy-pro-
tected, etc.) and may take longer in some
cases.
Display with audio CD:
Display with MP3 / WMA CD:
Initially, the title number is displayed briefly.
Then, the first ten characters of the track
name are shown.
+To display the full track name, press the
= button. The track name only appears
if it was added when the CD was created
(ID3 tags / metadata). Otherwise, only the
file name will be shown.
Notes on handling discs
CD mode
Switching to CD mode
Inserting a CD
$ Risk of accident
In order to avoid distraction which could lead
to an accident, the driver should insert or
eject CDs with the vehicle at a standstill and
operate the Sound 5 radio only if permitted
by road, weather and traffic conditions.
Bear in mind that at a speed of just 30 mph
(50 km / h), your vehicle is covering a dis-
tance of 44 feet (14 m) every second.

CD mode27
CD mode
Press the 8 button.
The CD is ejected.
Take the CD out of the slot.
If the CD is not removed from the disc
slot within 10 seconds, the drive draws in
the CD again for safety reasons.
Switching to CD mode Press the & button once or twice.
CD playback begins at the point last lis-
tened to.
If no CD is inserted, the
NO CD message ap-
pears for a short time.
The device jumps to the last sound source
played.
Skipping forwards / backwards
Operation of this function is identical for au-
dio CDs and MP3 / WMA CDs. Skip forwards:
The next track is played.
Skip back:
The current track restarts if it has been
playing for longer than approximately
10 seconds. If it has been playing for less
time, the previous track is played.
Skipping tracks using the controls on the
Sound 5 radio
In CD mode, with an audio CD or MP3 / WMA
CD inserted: Press the ü button to skip forward.
You will hear the next track.
or Press the û button to skip back.
You hear the previous track or the start of
the current track again.
Skipping tracks using the steering wheel
buttons
In CD mode, with an audio CD or MP3 / WMA
CD inserted: Switch the display in the instrument clus-
ter to the audio display ( page 17).
Press the & button to skip forward.
You hear the next track.
or Press the * button to skip back.
You hear the previous track.
Audible fast forward / fast rewind
In CD mode, with an audio CD or MP3 / WMA
CD inserted: Press and hold the ü button for fast
forward.
or Press and hold the û button for fast
rewind.Ejecting the CD
$ Risk of accident
In order to avoid distraction which could lead
to an accident, the driver should insert or
eject CDs with the vehicle at a standstill and
operate the Sound 5 radio only if permitted
by road, weather and traffic conditions.
Bear in mind that at a speed of just 30 mph
(50 km / h), your vehicle is covering a dis-
tance of 44 feet (14 m) every second.
CD playback

External audio source
32
External audio source
+This Operator’s Manual describes all fea-
tures, standard or optional, potentially
available for your vehicle at the time of pur-
chase. Please be aware that your vehicle
might not be equipped with all features de-
scribed in this manual.
You can connect an external audio source
(AUX) to the Sound 5 radio. The jack needed
can be found to the side behind the instru-
ment cluster.
+You cannot connect an external CD
changer.
For more information on connections, con-
sult a qualified specialist workshop or an au-
thorized Sprinter Dealer.
Depending on the device you want to con-
nect, the audio input must be set up appro-
priately.
This set-up can be carried out at a qualified
specialist workshop or an authorized Sprint-
er Dealer. Possible settings are:
audio input is switched off. Playback of
an external audio source is not possible
audio input is set to the mode for an ex-
ternal audio source
Switching to an external audio source
(AUX)
+You can only switch to AUX mode if the
audio input is set appropriately.
Press the & button repeatedly until
the following display appears:
Operating functions
You can control the following external audio
source functions via the Sound 5 radio: volume adjustment
sound settings
Operation is the same as for other audio
sources ( page 14).
Vehicle equipment
External audio source
$ Risk of accident
Operating an external audio source while the
vehicle is in motion will distract you. You may
not notice changing road and / or traffic con-
ditions, which may cause an accident.
Bear in mind that at a speed of just 30 mph
(50 km / h), your vehicle is covering a dis-
tance of 44 feet (14 m) every second.
For your safety and the safety of others, pull
over to a safe location and stop before oper-
ating an external audio source.
Setting up the audio input
Operating External Devices
$ Risk of accident
Due to the different volumes of the external
audio sources, system messages of the vehi-
cle may be much louder. You may need to dis-
able these system messages or adjust the
volume of these messages manually.