2011 MERCEDES-BENZ E-CLASS COUPE ad blue

tai
nc haracteristics, e.g. handling, vehicle
noise emissions or fuel consumption ,may
otherwise be adversely affected. In addi-
tion, when driving with aload, tyre dimen-
sion variations could cause the tyres to
come into contact with the bodywork and
axle components.T his could result in dam-
age to the tyres or the vehicle.
Mercedes-Ben zaccepts no liability for
damag eresulting from the us eoftyres,
wheel soraccessorie sothe rthan those tes-
ted and approved.
Further information about tyres, wheels
and approved combinations can be
obtained from any Mercedes-Ben zService
Centre.
! Retreaded tyres are neither tested nor
recommended by Mercedes-Benz, since
previous damage cannot always be detec-
ted on retreaded tyres. As aresult,
Mercedes-Ben zcannot guarante evehicle
safety if retreade dtyres are fitted. Do not
fit used tyres if you have no information
about their previous usage.
! Large wheels :the lower the section width
for acertain wheel size, the lower the ride
comfort is on poor road surfaces. Roll com-
fort and suspension comfort are reduced
and the risk of damage to the wheels and
tyres as aresult of driving over obstacles
increases.
i You will find atable of tyre pressures on
the inside of your vehicle's fuel filler flap.
For further information on tyre pressure,
see (Y page 321).
i Notes on the vehicle equipment –always
fit the vehicle:
R with tyre softhe same size on agiven axle
(left/right)
R with the same type of tyre satagiven
tim e(summer tyres, winter tyres,
MOExtende dtyres) i
Vehicles with MOExtende dtyre sare not
equipped with aTIREFIT kit at the factory.
It is therefore recommende dthat you addi-
tionally equip your vehicle with aTIREFIT kit
if you fit tyre sthat do not feature run-flat
properties ,e.g. winter tyres. ATIREFIT kit
can be obtained fro maMercedes-Benz
Service Centre.
i Overview of abbreviations used in the fol-
lowing tyre tables:
R BA: both axles
R FA: front axle
R RA: rear axle
In the following table, the wheel/tyre combi-
nations are allocated to the vehicle models
through variants, e.g. V1, V2 etc.: V1
E2
0024
,E2 20 CDI 24 V2
E2
5024
,E2 50 CDI V3
E3
5024 V4
E3
0024
,E3 50 CDI 24 V5
E5
0024 24
BlueEFFICIENCY Wheel and tyrec
ombinations
325Wheels and tyres Z

global warming (the greenhouse effect). Your
vehicle's CO 2emissions are directly related
to fuel consumption and therefor edepend on:
R efficient use of the fuel by the engine
R driving style
R other non-technical factors, such as envi-
ronmental influences or road conditions
You can minimise your vehicle's CO 2emis-
sions by driving carefully and having it serv-
iced regularly. Engine oil
Please bear the following in mind The quality of engine oils is decisive for the
function and service life of an engine. After
extensive tests, Mercedes-Benz approves
engine oils which correspon dtothe current
technical standard.
Therefore, only Mercedes-Benz approved
engine oils may be used in Mercedes-Benz
engines.
Further information on tested and approved
engine oils can be obtained from any
Mercedes-Benz Service Centre. Mercedes-
Benz recommends that you have the oil
change carried out at aMercedes-Benz
Service Centre. Mercedes-Benz approval is
indicated on the oil container by the inscrip-
tion "MB Approval" and the corresponding
designation, e.g. MB Approval 229.51.
The table shows which engine oils have been
approved for your vehicle. Petrol engines MB Approval
E2
0038
E2 5038 229.3, 229.5,
229.51
E3
0038
E3 5038 229.3, 229.5
E5
0038 229.5
Diesele
ngines MB Approval
Vehicles with
adiesel particle filter E2
20 CDI 38
E2 50 CDI 38
E3 50 CDI 38 228.51,
229.31, 229.51
You can call up an overview of approved
engin
eoils on the Internet at
http://bevo.mercedes-benz.com by enter-
ing the designation ,e.g. 229.5.
i If the engin eoils listed in the table are not
available, you may add amaximum of 1. 0l
of the following engine oils, once only, until
the next oil change:
R vehicles with apetrol engine: MB
Approval 229.1orA CEA A3
R vehicles with adiesel engine: MB
Approval 229.1orA CEA C3
Capacities The following values refer to an oil change
including the oil filter.
38 BlueEFFICIENCY. Service products and capacities
335Technical data Z

Vehicl
emodel Capacity including
oilf ilter 39 E2
0040
E2 5040 5.5 l
E3
0040
E3 5040
E2 20 CDI 40
E2 50 CDI 40 6.5 l
E3
50 CDI 40 8.0 l
E5
0040 Additives
!
Do not us eaddit ivesine ngine oil. This
could damag ethe engine.
Engine oi lviscosity Viscosity describe
sthe flo wcharacteristics
of afluid .Ifane ngine oi lhas ah ighv iscosity,
thi sm eans tha titisthick;alow viscosity
means that it is thin.
Engine oil selection is based on the respective
outside temperatures and in accordance with
the SAE classification (viscosity). The table
below shows you which SAE classifications
are to be used. The low-temperature proper-
ties of engine oils can be significantly
impaired during operation due to, for exam-
ple, ageing or soot and fuel accretion. It is
therefore strongly recommended to observe
regularo il changes using an approved engine
oil with the appropriate SA Eclassification. Brake fluid
G
WARNING
The brak efluid constantly absorb smoisture
fro mt he air; this lowers its boiling point.
If the boiling point of the brake fluid is too low,
vapour pockets may form in the brake system
when the brakes are applied hard (e.g. when
driving downhill). This would impair braking
efficiency.
You should have the brake fluid renewed at
regular intervals. The brake fluid change inter-
vals can be found in the Service Booklet.
Only use brake fluid approved by Mercedes-
Benz.I nformation about approved brake flu-
ids can be obtained from any Mercedes-Benz
Service Centre.
i There is usually anotic eint he engine
compartmenttor emind you when the next
brake fluid change is due.
39 Missing values were not availabl eattime of going to print.
40 BlueEFFICIENCY. 336
Service product
sand capacitiesTechnical data

Coolant
Important safety notes The coolan
tisamixture of water and anti-
freeze/corrosion inhibitor. It performs the
following tasks:
R anti-corrosion protection
R antifreeze protection
R raising the boiling point
i When the vehicle is first delivered, it is fil-
led with acoolant mixture that ensures
adequate antifreeze and corrosion protec-
tion.
! Only add coolant that has been premixed
with the desired antifreeze protection. The
engine could otherwise be damaged.
Further information on coolants and on fill-
ing can be found in the Mercedes-Benz
Specifications for Service Products, MB
Approval 310.1,e .g. on the Internet at
http://bevo.mercedes-benz.com .You can
also consult aMercedes-Benz Service
Centre.
! Always use asuitable coolant mixture,
even in countries where high temperatures
prevail.
Otherwise, the cooling system will not be
sufficiently protected from corrosion ,and
the boiling point will be too low.
If antifreeze/corrosion inhibitor is present in
the correc tconcentration, the boiling point of
the coolant will be around 130 †.
The antifreeze/corrosion inhibitor concentra-
tion in the engine cooling system should:
R be at least 50%. This will protec tthe engine
cooling system against freezing down to
around -37 †.
R not exceed 55% (antifreeze protection
down to -45 †);otherwise, heat will not be
dissipated as effectively. If the vehicle has lost coolant, top it up with
equal amount
sofwater and antifreeze/cor-
rosion inhibitor. Mercedes-Benz recom-
mends an antifreeze/corrosion inhibitor
which has been approved for Mercedes-Benz.
! The engin ecoolin gsystem is filled with
coolan tthat must be renewed after 15
years, or after 250,000 km at the latest. Vehicle data
Vehicle data,
E200 BlueEFFICIENCY Vehicle dimensions
Vehicle length (ECE)
Coupé
469
8mm Cabriolet
469
8mm Vehicle width including exterior mirrors
Coupé
202
8mm Cabriolet
201
5mm Vehicle width withou
texterior mirrors Coupé
178
6mm Cabriolet
178
6mm Vehicle height
41 Coupé
139
3mm Cabriolet
140
2mm Vehicle height when opening/closing
ther
oof42 Cabriolet
Wheelbase
Coupé
276
0mm Cabriolet
276
0mm 41
The values specified may differ from the actual values, dependin gonthe tyres ,load, optional equipment
and the stat eofthe suspension.
42 Missin gvalues were not available at the time of going to print. Vehicle data
337Technical data Z

Vehicl
eweigh ts Unlade
nweigh t(in accordance with EU
Directive), manual transmission 42Coupé
Cabriolet
Unlade
nweigh t(in accordance with EC
Directive), automatic transmission 42Coupé
Cabriolet
The unladen weight includes the driver
(68 kg), luggage (7 kg) and al lfluid s(fuel
tank 90% full) .Items of optional equipment
increase the unladen weight and reduc ethe
maximum payload. Maximum roof
load, Coupé only
100 kg
Maximum boot
load
100 kg
Vehicle-specifi
cweight information can be
found on the vehicle identification plate
(Y page 333). Vehicle data,
E250 BlueEFFICIENCY Vehicle dimensions
Vehicle length (ECE)
Coupé
4698mm
Cabriolet
4698mm
Vehicle width including exterior mirrors
Coupé
2028mm
Cabriolet
2015mm Vehicle dimensions
Vehicle width without exterior mirrors
Coupé
1786mm
Cabriolet
1786mm
Vehicle height
43 Coupé
1397mm
Cabriolet
1402mm
Vehicle height when opening/closing
the roof
44 Cabriolet
Wheelbase
Coupé
2760mm
Cabriolet
2760mm
Vehicle weights
Unladen weight (in accordance with EC
Directive)
44 Coupé
Cabriolet
The unladen weight includes the driver
(68 kg), luggage (7 kg) and all fluids (fuel
tank 90% full). Item
sofoptional equipment
increase the unladen weight and reduce the
maximum payload. 42
Missing values were not available at the time of going to print.
43 The values specified may differ from the actual values, depending on the tyres, load, optional equipment
and the stat eofthe suspension.
44 Missing values were not available at the time of going to print. 338
Vehicle dataTechnical data

Maximum roof
load, Coupé only
100 kg
Maximum boot
load
100 kg
Vehicle-specific weight information can be
found on the vehicl eidentification plate
(Y page3 33). Vehicle data,
E300 BlueEFFICIENCY Vehicle dimensions
Vehicle length (ECE)
Coupé
4698 mm
Cabriolet
4698 mm
Vehicle width including exterio
rmirrors Coupé
202
8mm Cabriolet
201
5mm Vehicle width withou
texterior mirrors Coupé
178
6mm Cabriolet
178
6mm Vehicle height
45 Coupé
139
7mm Cabriolet
140
2mm Vehicle height when opening/closing
th
er oof 46 Cabriolet
Wheelbase
Coupé
276
0mm Cabriolet
276
0mm Vehicle weights
Unladen weight (in accordance with EC
Directive)
46 Coupé
Cabriolet
The unladen weight includes the driver
(68 kg), luggage (7 kg) and all fluids (fuel
tan
k90% full). Items of optional equipment
increase the unladen weight and reduce the
maximum payload. Maximum roof
load, Coupé only
100 kg
Maximum boot
load
100 kg
Vehicle-specifi
cweight information can be
found on the vehicle identification plate
(Y page 333). Vehicle data,
E350 BlueEFFICIENCY Vehicle dimensions
Vehicle length (ECE)
Coupé
4698mm
Cabriolet
4698mm
Vehicle width including exterior mirrors
Coupé
2028mm
Cabriolet
2015mm
Vehicle width without exterior mirrors
Coupé
1786mm
Cabriolet
1786mm
45
The values specified may differ from the actual values, depending on the tyres, load, optional equipment
and the stat eofthe suspension.
46 Missing values were not available at the time of going to print. Vehicle data
339Technical data Z

Vehicl
edimensions Vehicl
eheight 47 Coupé
1397 mm
Cabriolet
1402 mm
Vehicl
eheight when opening/closing
the roof 48 Cabriolet
Wheelbase
Coupé
2760 mm
Cabriolet
2760 mm
Vehicl
eweigh ts Unlade
nweigh t(in accordance with EC
Directive) 48 Coupé
Cabriolet
The unladen weight includes the driver
(68 kg), luggage (7 kg) and al lfluid s(fuel
tank 90% full) .Items of optional equipment
increase the unladen weight and reduc ethe
maximum payload. Maximum roof
load, Coupé only
100 kg
Maximum boot
load
100 kg
Vehicle-specifi
cweight information can be
found on the vehicle identification plate
(Y page 333). Vehicle data,
E500 BlueEFFICIENCY Vehicle dimensions
Vehicle length (ECE)
Coupé
4698mm
Cabriolet
4698mm
Vehicle width including exterior mirrors
Coupé
2028mm
Cabriolet
2015mm
Vehicle width without exterior mirrors
Coupé
1786mm
Cabriolet
1786mm
Vehicle height
49 Coupé
1398mm
Cabriolet
1402mm
Vehicle height when opening/closing
the roof
50 Cabriolet
Wheelbase
Coupé
2760mm
Cabriolet
2760mm
Vehicle weights
Unladen weight (in accordance with EC
Directive)
50 Coupé
47
The values specified may differ from the actual values, depending on the tyres, load, optional equipment
and the stat eofthe suspension.
48 Missing values were not available at the time of going to print.
49 The values specified may differ from the actual values, depending on the tyres, load, optional equipment
and the stat eofthe suspension.
50 Missing values were not available at the time of going to print. 340
Vehicle dataTechnical data

Vehicl
eweigh ts Cabriolet
The unladen weight includes the driver
(68 kg), luggage (7 kg) and al
lfluid s(fuel
tank 90% full) .Items of optional equipment
increase the unladen weight and reduc ethe
maximum payload. Maximum roof
load, Coupé only
100 kg
Maximum boot
load
100 kg
Vehicle-specifi
cweight information can be
found on the vehicle identification plate
(Y page 333). Vehicle data,
E220 CDI BlueEFFI-
CIENCY Vehicle dimensions
Vehicle length (ECE)
Coupé
4698mm
Cabriolet
4698mm
Vehicle width including exterior mirrors
Coupé
2028mm
Cabriolet
2015mm
Vehicle width without exterior mirrors
Coupé
1786mm
Cabriolet
1786mm
Vehicle height
51 Coupé
1393mm
Cabriolet
1402mm Vehicle dimensions
Vehicle height when opening/closing
the roof
52 Cabriolet
Wheelbase
Coupé
2760mm
Cabriolet
2760mm
Vehicle weights
Unladen weight (in accordance with EU
Directive), manual transmission
52 Coupé
Cabriolet
Unladen weight (in accordance with EC
Directive), automatic transmission
52 Coupé
Cabriolet
The unladen weight includes the driver
(68 kg), luggage (7 kg) and all fluids (fuel
tank 90% full). Item
sofoptional equipment
increase the unladen weight and reduce the
maximum payload. Maximum roof
load, Coupé only
100 kg
Maximum boot
load
100 kg
Vehicle-specific weight information can be
found on the vehicle identification plate
(Y page 333). 51
The values specified may differ from the actual values, depending on the tyres, load, optional equipment
and the stat eofthe suspension.
52 Missing values were not available at the time of going to print. Vehicle data
341Technical data Z