2011 MERCEDES-BENZ CLS COUPE manual transmission

[x] Cancel search: manual transmission

Page 15 of 337

MERCEDES-BENZ CLS COUPE 2011  Owners Manual Setting the ambient lighting col-
our (on-board computer) ................ 208
Switching the Adaptive Highbeam
Assist on/off (on-board com-
puter) ............................................. 208
Swi

Page 17 of 337

MERCEDES-BENZ CLS COUPE 2011  Owners Manual PRE-SAFE
®
system
Display message ............................ 216
Operation ........................................ .40
Program selector ...............................1 39
Program selector button

Page 22 of 337

MERCEDES-BENZ CLS COUPE 2011  Owners Manual Protection of the environment
Notes
H
Environmental note
Daimler's declared policy is one of integrated
environmental protection.
The objectives are for the natural resources
which form the basis

Page 97 of 337

MERCEDES-BENZ CLS COUPE 2011  Owners Manual i
The mirrors do not fold out if they have
been folded in manually.
Exterior mirror out of position If an exterior mirror has been pushed out of
position, proceed as follows:
X Vehicles without electr

Page 133 of 337

MERCEDES-BENZ CLS COUPE 2011  Owners Manual is open, the power supply is deactivated
again.
Removing the Start/Stop button
You can remove the Start/Stop button from
the ignition lock and start the vehicle as nor-
mal using the key.
i You do not

Page 136 of 337

MERCEDES-BENZ CLS COUPE 2011  Owners Manual Automatic engine start
The engine is started automatically if you:
R release the brake pedal when HOLD is not
activated and the transmission is in posi-
tion Dor N
R shif tthe transmission to position

Page 141 of 337

MERCEDES-BENZ CLS COUPE 2011  Owners Manual A
Neutral
Do not shift the transmission to
N
while driving. Otherwise, the auto-
matic transmission could be dam-
aged.
If ESP ®
is deactivated or faulty:
only shift the transmission to posi-
tion Ni

Page 142 of 337

MERCEDES-BENZ CLS COUPE 2011  Owners Manual i
Further information on the "Automatic
drive program" (Y page 139).
X Press program selector button :repeat-
edly until the letter for the desired gearshift
program appears in the multifuncti
Page:   1-8 9-16 next >