2011 MERCEDES-BENZ CL-Class spare tire

[x] Cancel search: spare tire

Page 12 of 480

MERCEDES-BENZ CL-Class 2011 C216 Owners Manual EngineIrregular running  ............................ 273
Starting problems  ..........................273
Starting the engine with the key  ....269
Starting with KEYLESS-GO  .............269
Switchin

Page 66 of 480

MERCEDES-BENZ CL-Class 2011 C216 Owners Manual If ESP®
 intervenes, the  ÷ warning lamp
flashes in the instrument cluster.GWarning
Under no circumstances should you
deactivate ESP ®
 when the  ÷ ESP®
warning lamp in the instrument cluster
fla

Page 313 of 480

MERCEDES-BENZ CL-Class 2011 C216 Owners Manual GWarning!
The system cannot detect objects located
above the area that the sensors scan. These
objects, e.g. protruding load, overhang, or
truck tail lifts, will be ignored when computing
the parking

Page 383 of 480

MERCEDES-BENZ CL-Class 2011 C216 Owners Manual Driving systemsProblemPossible causes/consequences and M Solutions·
The red distance
warning lamp lights up
while the vehicle is in
motion. A warning tone
also sounds.GRisk of accident
A warning is i

Page 396 of 480

MERCEDES-BENZ CL-Class 2011 C216 Owners Manual XPress and hold Roadside Assistance
button  : for more than two seconds.
A call to a Mercedes-Benz Roadside
Assistance Representative is initiated. The
indicator lamp in Roadside Assistance
button  :

Page 423 of 480

MERCEDES-BENZ CL-Class 2011 C216 Owners Manual Flat tire
Preparing the vehicle
i Vehicle preparation is not necessary on
vehicles with the MOExtended run-flat
system.
XStop the vehicle as far away as possible
from traffic on solid, non-slippery an

Page 424 of 480

MERCEDES-BENZ CL-Class 2011 C216 Owners Manual XPrepare the vehicle as described
(Y page 421).
XRemove the following items from the
stowage well under the trunk floor:
Rthe emergency spare wheel
Rthe vehicle tool kit
Rthe folding wheel chock
Rthe

Page 426 of 480

MERCEDES-BENZ CL-Class 2011 C216 Owners Manual XMake sure that the base of the jack is
positioned directly under the jacking point.
XTurn crank ? clockwise until jack = sits
completely on jacking point ; and the
base of the jack lies evenly on the
Page:   1-8 9-16 17-24 next >