2011 MAZDA MODEL MAZDASPEED 3 tires

[x] Cancel search: tires

Page 191 of 508

MAZDA MODEL MAZDASPEED 3 2011  Owners Manual (in English) Black plate (191,1)
CAUTION
ØEach tire, including the spare (if provided), should be checked monthly when cold
and inflated to the inflation pressure recommended by the vehicle manufacturer
on the ve

Page 192 of 508

MAZDA MODEL MAZDASPEED 3 2011  Owners Manual (in English) Black plate (192,1)
qTire Pressure Monitoring System
Warning Light
This warning light illuminates for a few
seconds when the ignition is switched
ON.
Thereafter, the warning light illuminates
and a be

Page 193 of 508

MAZDA MODEL MAZDASPEED 3 2011  Owners Manual (in English) Black plate (193,1)
Adjust the tire pressure to the correct tire
pressure. Refer to the specification charts
(page 10-11).
CAUTION
When replacing/repairing the tires or
wheels or both, have the work d

Page 194 of 508

MAZDA MODEL MAZDASPEED 3 2011  Owners Manual (in English) Black plate (194,1)
If the warning light illuminates again even
after the tire pressures are adjusted, there
may be a tire puncture. Replace the
punctured tire with the temporary spare
tire (page 7-9)

Page 195 of 508

MAZDA MODEL MAZDASPEED 3 2011  Owners Manual (in English) Black plate (195,1)
3. After about 15 minutes, drive the
vehicle at a speed of at least 25 km/h
(16 mph) for 10 minutes and the tire
pressure sensor ID signal code will be
registered automatically.
NO

Page 210 of 508

MAZDA MODEL MAZDASPEED 3 2011  Owners Manual (in English) Black plate (210,1)
CAUTION
If the automatic transaxle warning
light illuminates, the transaxle has
an electrical problem. Continuing to
drive your Mazda in this condition
could cause damage to your
t

Page 211 of 508

MAZDA MODEL MAZDASPEED 3 2011  Owners Manual (in English) Black plate (211,1)
Adjust the tire pressure to the correct tire
pressure. Refer to the specification charts
(page 10-11).
CAUTION
When replacing/repairing the tires or
wheels or both, have the work d

Page 352 of 508

MAZDA MODEL MAZDASPEED 3 2011  Owners Manual (in English) Black plate (352,1)
To secure the jack
1. Insert the wing bolt into the jack with
the jack screw pointing up and turn the
wing bolt clockwise to temporarily
tighten it.
2. Turn the jack screw in the d
Page:   < prev 1-8 9-16 17-24 25-32 33-40 41-48 49-56 ... 56 next >