2011 MAZDA MODEL 3 4-DOOR warning

[x] Cancel search: warning

Page 328 of 514

MAZDA MODEL 3 4-DOOR 2011  Owners Manual Black plate (328,1)
Safety Certification
FCC ID: CB2MBLUEC07 IC:279B-
MBLUEC07
This device complies with Part 15 of the
FCC Rules and with RSS-210 of Industry
Canada. Operation is subject to the
follo

Page 334 of 514

MAZDA MODEL 3 4-DOOR 2011  Owners Manual Black plate (334,1)
SwitchFunction
Enter (up/down) switch Used to select a menu and change numbers. Select up or down and press enter.
Right switch/Left
switch Used to select digits when setting numbe

Page 337 of 514

MAZDA MODEL 3 4-DOOR 2011  Owners Manual Black plate (337,1)
The average vehicle speed will be
calculated every 10 seconds.
To erase the displayed data, Refer to
Settings on page 6-110.
After erasing, the calculated average
vehicle speed in

Page 342 of 514

MAZDA MODEL 3 4-DOOR 2011  Owners Manual Black plate (342,1)
3. Select the item you want to turn off(TIRE ROTATION or SERVICE DUE)
by pressing the Enter (up/down) switch
up or down, and then press the Enter
(up/down) switch.
4. Select OFF an

Page 343 of 514

MAZDA MODEL 3 4-DOOR 2011  Owners Manual Black plate (343,1)
4. Select the desired setting by pressingthe Enter (up/down) switch up or
down, and then press the Enter (up/
down) switch.
NOTE
The buzzer volume for both the ignition key
reminde

Page 345 of 514

MAZDA MODEL 3 4-DOOR 2011  Owners Manual Black plate (345,1)
Storage Compartments
WARNING
Keep storage boxes closed when
driving:Driving with the storage boxes open
is dangerous. To reduce the
possibility of injury in an accident or
a sudden

Page 346 of 514

MAZDA MODEL 3 4-DOOR 2011  Owners Manual Black plate (346,1)
Storage trayí
The storage tray can be installed to the
left/right side of the center console.
Storage tray
Using the armrestí
CAUTION
ØWhen sliding the armrest, be
careful not t

Page 347 of 514

MAZDA MODEL 3 4-DOOR 2011  Owners Manual Black plate (347,1)
Use the loops in the luggage compartment
to secure cargo with a rope or net. The
tensile strength of the loops is 196 N (20
kgf, 44 lbf). Do not apply excessive force
to the loops