Page 375 of 454
Engine shield
Some vehicles may be equipped
with an aero-shield under the
engine. This shield needs to be
removed for service, including oil
and filter changes. It is secured with
four quick release fasteners.
3.7L V6 engine
1. Power steering fluid reservoir
2. Engine coolant reservoir
3. Brake fluid reservoir
4. Battery
5. Power distribution box
6. Air filter assembly7. Automatic transmission fluid
dipstick
8. Engine oil dipstick
9. Engine oil filler cap
10. Windshield washer fluid
reservoir
Maintenance and Specifications
375
2011 MKT(mkt)
Owners Guide, 1st Printing
USA(fus)
Page 378 of 454

Changing rear window wiper blade
To replace the rear wiper blade:
1. Grab the wiper arm with one
hand close to the arm/blade joint
and pull it as far away from the
glass as possible. Do not use
excessive force because it can break
the wiper arm at the heel. Hold it
there until the next step.
2. Grab the primary structure of the
blade with the other hand close to
the arm/blade joint.
3. The wiper arm has a snap
retention feature to receive a cross
pin from the wiper blade structure.
Grip tightly and press on the
arm/blade joint from beneath and
separate the blade from the arm.
Avoid rotating the wiper blade
structure and trapping your left
hand between the arm and blade.
4. Attach the new wiper to the
wiper arm and press it into place
until a click is heard.
If you find this procedure too difficult, please see your dealer.
ENGINE OIL
Checking the engine oil
Refer to thescheduled maintenance informationfor the appropriate
intervals for checking the engine oil.
1. Make sure the vehicle is on level ground.
2. Turn the engine off and wait 15 minutes for the oil to drain into the
oil pan.
3. Set the parking brake and ensure the gearshift is securely latched in P
(Park).
4. Open the hood. Protect yourself from engine heat.
Maintenance and Specifications
378
2011 MKT(mkt)
Owners Guide, 1st Printing
USA(fus)
Page 409 of 454

AIR FILTER
Refer toscheduled maintenance informationfor the appropriate
intervals for changing the air filter element.
When changing the air filter element, use only the air filter element
listed. Refer toMotorcraftpart numbersin this chapter.
WARNING:To reduce the risk of vehicle damage and/or
personal burn injuries do not start your engine with the air
cleaner removed and do not remove it while the engine is running.
For Ecoboost™ equipped vehicles,when servicing the air cleaner, it
is important that no foreign material enter the air induction system. The
engine and turbocharger are susceptible to damage from even small
particles.
Changing the air filter element
3.7L V6 engine
3.5L V6 EcoBoost™ engine
1. Release the clamps that secure the air filter housing cover.
2. Carefully separate the two halves of the air filter housing.
3. Remove the air filter element from the air filter housing.
Maintenance and Specifications
409
2011 MKT(mkt)
Owners Guide, 1st Printing
USA(fus)
Page 410 of 454

4. Wipe the air filter housing and cover clean to remove any dirt or
debris and to ensure good sealing.
5. Install a new air filter element. Be careful not to crimp the filter
element edges between the air filter housing and cover. This could cause
filter damage and allow unfiltered air to enter the engine if not properly
seated.
6. Replace the air filter housing
cover and secure the clamps. Be
sure that the air cleaner cover tabs
are engaged into the slots of the air
cleaner housing.
Note:Failure to use the correct air filter element may result in severe
engine damage. The customer warranty may be void for any damage to
the engine if the correct air filter element is not used.
VEHICLE STORAGE
If you plan on storing your vehicle for an extended period of time
(30 days or more), refer to the following maintenance recommendations
to ensure your vehicle stays in good operating condition.
All motor vehicles and their components were engineered and tested for
reliable, regular driving. Long term storage under various conditions may
lead to component degradation or failure unless specific precautions are
taken to preserve the components.
General
•Store all vehicles in a dry, ventilated place.
•Protect from sunlight, if possible.
•If vehicles are stored outside, they require regular maintenance to
protect against rust and damage.
Body
•Wash vehicle thoroughly to remove dirt, grease, oil, tar or mud from
exterior surfaces, rear-wheel housing and underside of front fenders.
See theCleaningchapter for more information.
•Periodically wash vehicles stored in exposed locations.
Maintenance and Specifications
410
2011 MKT(mkt)
Owners Guide, 1st Printing
USA(fus)
Page 453 of 454

S
Safety belts (see Safety
restraints) .........192, 195–196, 198,
200–201
Safety Canopy ...................216, 218
Safety defects, reporting ..361–362
Safety restraints .......192, 195–198,
200–201
Belt-Minder...........................202
extension assembly ................200
for adults .................196, 198, 200
for children .............................222
Occupant Classification
Sensor ......................................194
warning light and
chime ...............................201–202
Safety restraints - LATCH
anchors ......................................230
Safety seats for children ..........226
Safety Compliance
Certification Label ....................418
Satellite Radio .............................64
Scheduled Maintenance Guide
Normal Scheduled
Maintenance and Log .............433
What Maintenance Schedule
Should You Follow? ................429
Seats ..........................................170
child safety seats ....................226
cleaning ...................................369
climate control ..........88, 176, 188
easy access/easyout feature ..178
front seats .......................175, 187
heated ......................................187
memory seat ...................159, 177
second row seats ............182, 185
third row seats ........185, 188–189
Second-row power fold seat ....185SecuriCode keyless entry
system ........................................163
SecuriLock passive anti-theft
system ........................................165
Servicing your vehicle ..............372
Setting the clock .........................40
SOS Post Crash Alert ...............221
Sound features ............................53
Spare tire (see Changing the
Tire) ...........................................336
Spark plugs, specifications ......413,
417
Specification chart,
lubricants ...................................414
Speed control ............................120
Starting your vehicle ........276–278
jump starting ..........................350
push button start system .......278
Steering wheel
controls ....................................131
tilting .......................................109
SYNC..........................................87
System limitations ......................58
T
Temporary mobility kit .............340
Third-row power fold seat .......190
Tilt steering wheel ....................109
Tire Pressure Monitoring
System (TPMS)
Tires, Wheels and Loading ....257
Tires ...........................242–243, 333
alignment ................................250
care ..........................................246
changing ..........................333, 336
Index
453
2011 MKT(mkt)
Owners Guide, 1st Printing
USA(fus)