2011 Lexus IS200d maintenance

TABLE OF CONTENTS
IS250/220d/200d_EE
1
1Before drivingAdjusting and operating features such as door locks,
mirrors, and steering column.
2When drivingDriving, stopping and safe-driving information.
3Interior featuresAir conditioning and audio systems, as well as other in-
terior features for a comfortable driving experience.
4Maintenance and
careCleaning and protecting your vehicle, performing do-it-
yourself maintenance, and maintenance information.
5When trouble
arisesWhat to do if the vehicle needs to be towed, gets a flat
tire, or is involved in an accident.
6Vehicle specifica-
tionsDetailed vehicle information.
IndexAlphabetical listing of information contained in this
manual.

1
2
3
4
5
6
IS250/220d/200d_EE
5
3-7. Other interior features
Sun visors ........................... 362
Vanity mirrors .................... 363
Clock .................................. 364
Satellite switches ................ 365
Ashtrays ............................. 368
Cigarette lighter.................. 369
Power outlet ....................... 370
Seat heaters ........................ 371
Seat heaters and ventilators 374
Armrest............................... 377
Rear sunshade .................... 378
Trunk storage extension ..... 380
Coat hooks.......................... 381
Floor mat ............................ 382
Trunk features .................... 383
4-1. Maintenance and care
Cleaning and protecting
the vehicle exterior........... 388
Cleaning and protecting
the vehicle interior ........... 392
4-2. Maintenance
Maintenance requirements . 3954-3. Do-it-yourself maintenance
Do-it-yourself service
precautions ....................... 398
Hood ................................... 401
Positioning a floor jack ...... 402
Engine compartment .......... 404
Tires ................................... 420
Tire inflation pressure ........ 424
Wheels................................ 426
Air conditioning filter ........ 428
Electronic key battery ........ 431
Checking and replacing
fuses ................................. 433
Light bulbs ......................... 448
5-1. Essential information
Emergency flashers ............ 458
If your vehicle needs to
be towed ........................... 459
If you think something is
wrong ............................... 465
Fuel pump shut off system . 466
4Maintenance and care
5When trouble arises

TABLE OF CONTENTSIndex
IS250/220d/200d_EE
6
5-2. Steps to take in an
emergency
If a warning light turns on
or a warning buzzer
sounds... .......................... 467
If a warning message is
displayed .......................... 473
If you have a flat tire
(vehicles with a spare tire) 485
If you have a flat tire
(vehicles with an
emergency tire
puncture repair kit)........... 497
If the engine will not start .. 512
If the shift lever cannot
be shifted from P .............. 514
If you lose your keys .......... 515
If the electronic key does
not operate properly ......... 516
If the vehicle battery is
discharged ........................ 521
If your vehicle overheats .... 525
If you run out of fuel and
the engine stalls ................ 528
If the vehicle becomes stuck .....
529
If your vehicle has to be
stopped in an emergency.. 5316-1. Specifications
Maintenance data
(fuel, oil level, etc.) .......... 534
Fuel information................. 553
6-2. Customization
Customizable features ........ 556
Abbreviation list ......................... 562
Alphabetical index ...................... 563
What to do if... ........................... 574
6Vehicle specifications
Index

96
IS250/220d/200d_EE
1-6. Theft deterrent system
Engine immobilizer system
System maintenance
The vehicle has a maintenance-free type engine immobilizer system.
Conditions that may cause the system to malfunction
If the key is in contact with a metallic object
If the key is in close proximity to or touching a key to the security sys-
tem (key with a built-in transponder chip) of another vehicle
The vehicle's keys have built-in transponder chips that prevent the
engine from starting if the key has not been previously registered in
the vehicle's on-board computer.
Never leave the keys inside the vehicle when you leave the vehicle.
The indicator light flashes
after the “ENGINE START
STOP” switch has been
turned OFF to indicate that
the system is operating.
The indicator light stops
flashing after the “ENGINE
START STOP” switch has
been turned to ACCESSORY
or IGNITION ON mode to
indicate that the system has
bld

103
1-6. Theft deterrent system
1
Before driving
IS250/220d/200d_EE
Intrusion sensor (if equipped)
The sensor detects an intruder or movement in the vehicle. When
an intruder or movement is detected, the alarm will be triggered.
This system is designed to deter and prevent vehicle theft but does
not guarantee absolute security against all intrusions.
For details about the alarm, refer to “Alarm”.
Canceling the intrusion sensor (if equipped)
The operation of sensor can be canceled using the satellite
switches.

(P. 365)
System maintenance
The vehicle has a maintenance-free type alarm system.
Points to remember before locking the doors
To prevent unexpected triggering of the alarm, make sure to check the fol-
lowing before locking the doors:
Nobody is in the vehicle.
The windows and moon roof are closed before the alarm is set.
The alarm system does not guarantee absolute security. To help prevent
theft, make sure to check that no valuables and so forth are left in the vehi-
cle.

247
2-5. Driving information
2
When driving
IS250/220d/200d_EE
Break-in schedule
Lexus recommends that vehicles fitted with new power train components
should not be used for towing trailers for the first 800 km (500 miles).
Maintenance
Maintenance must be performed more frequently when using the vehicle
for towing due to the greater weight burden placed on the vehicle com-
pared to normal driving.
Retighten all bolts securing the hitching ball and bracket after towing for
approximately 1000 km (600 miles).
Safety checks before towing
Check that the maximum load limit for the towing hitch/bracket hitch
ball is not exceeded. Bear in mind that the coupling weight of the trailer
will add to the load exerted on the vehicle. Also make sure that you will
not be towing a load that exceeds the maximum permissible axle capac-
ity.
Ensure that the trailer load is secure.
Supplementary outside rear view mirrors should be added to the vehicle
if the traffic behind cannot be clearly seen with standard mirrors. Adjust
the extending arms of these mirrors on both sides of the vehicle so that
they always provide maximum visibility of the road behind.
NOTICE
When the rear bumper strengthening material is aluminum
Ensure the steel bracket part does not come directly in contact with that
area.
When steel and aluminum come into contact, there is a reaction similar to
corrosion, which will weaken the section concerned which may result in
damage. Apply a rust inhibitor to parts that will come in contact when
attaching a steel bracket.
When installing a towing harness to the vehicle
To prevent inoperative stop lights and damage to the vehicle stop light wir-
ing, take care when connecting a trailer harness to the vehicle. A relay with
a separate power source must be added to limit the current draw on the vehi-
cle stop light wiring.

4Maintenance and care
387
4-1. Maintenance and care
Cleaning and protecting
the vehicle exterior ........ 388
Cleaning and protecting
the vehicle interior ......... 392
4-2. Maintenance
Maintenance
requirements .................. 395
4-3. Do-it-yourself
maintenance
Do-it-yourself service
precautions..................... 398
Hood ................................ 401
Positioning a floor jack .... 402
Engine compartment ........ 404
Tires ................................. 420
Tire inflation pressure ...... 424
Wheels ............................. 426
Air conditioning filter ...... 428
Electronic key battery ...... 431
Checking and replacing
fuses ............................... 433
Light bulbs ....................... 448

388
IS250/220d/200d_EE
4-1. Maintenance and care
Cleaning and protecting the vehicle exterior
Automatic car washes
Fold the mirrors back before washing the vehicle.
Brushes used in automatic car washes may scratch the vehicle surface
and harm your vehicle’s paint.
High pressure car washes
Do not allow the nozzles of the car wash to come within close proximity
of the windows.
Before car wash, check that the fuel filler door on your vehicle is closed
properly.
Touch-up paint (if equipped)
Touch-up paint may be used to cover small chips or scratches.
Apply the paint soon after the damage occurs or corrosion may set in. To
apply the touch-up paint so it is hardly noticeable the trick is to apply it only
to the bare spots. Apply only the smallest amount possible and do not paint
the surface around the scratch or chip.
Perform the following to protect the vehicle and maintain it in prime
condition.
Working from top to bottom, liberally apply water to the
vehicle body, wheel wells and underside of the vehicle to
remove any dirt and dust.
Wash the vehicle body using a sponge or soft cloth, such as
a chamois.
For hard-to-remove marks, use car wash soap and rinse
thoroughly with water.
Wipe away any water.
Wax the vehicle when the waterproof coating deteriorates.
If water does not bead on a clean surface, apply wax when the vehi-
cle body is cool.