Introduction
GENERAL MAINTENANCE AND REGULAR USE
MAINTENANCE
44
In addition to scheduled maintenance,
your Lexus requires ongoing general
maintenance such as fluid checks and
visual inspections. The recommended
guidelines for inspections are listed
below. Please refer to the “Mainte
nance” section of the
Owner’s Manual
for a detailed description of inspec
tion procedures.
Every30 Days
At least once every 30 days, perform
these inspections:
•Check engine oil level using
the dipstick
•Visually check engine coolant
level on the see through
reservoir
•Visually check brake fluid level
on the see through reservoir
•Visually check power steering
fluid level on the see through
reservoir (ES)
•Visually check condition of
battery
•Check level of windshield
washer fluid
•Check tire pressure
•Check tires for damage
and wear
When Cleaning the Interior
•Remove dirt and dust with a
vacuum cleaner. Wipe dirty sur
faces with a soft cloth dampened
with warm water.
•When cleaning carpet or cloth
interior, remove dirt and dust
with a vacuum cleaner. Apply afoaming type carpet cleaner
with a sponge or brush, allowing
cleaner to work for a few min
utes to loosen dirt. Continue by
rubbing carpet or cloth interior
in a circular motion. Wipe off any
excess cleaner with a clean cloth.
If any dirt remains, repeat process.
Best results are obtained by
keeping carpet and cloth interior
as dry as possible.
•When cleaning leather interior,
removedirtand dust with a
vacuum cleaner. Using a sponge,
apply a small amount of neutral
wool detergent mixed in water,
rubbing in a circular motion.
Wipe off any excess detergent
and let leather dry in an open air
location.
EXPLANATION OF MAINTENANCE ITEMS
MAINTENANCE
Scheduled MaintenanceLog70
Note:Initial replacement is at 120
months/100,000 miles. Replace
every 60 months/50,000 miles
thereafter.
Engine Oil and Oil Filter
Replace the oil filter and drain and
refill the engine oil at specified inter vals. For recommended oil grade
and viscosity, refer to your
Owner’s
Manual
.The vehicle is equipped with
a replaceable oil filter element and
oil filter cap O ring; replace both at
each oil change. For instructions on
how to reset the reminder light, refer
to your
Owner’s Manual.
Exhaust Pipes and Mountings
Visually inspect the exhaust pipes,
muffler and hangers for cracks,
deterioration and damage. Start
the engine and listen carefully for
any exhaust leakage. Tighten connec
tions and replace parts as necessary.
Fuel Lines and Connections, Fuel
Tank Band and Fuel Tank Vapor
Vent System Hoses
Visually inspect for corrosion, dam
age, cracks, and loose or leaking
connections. Tighten connections
and replace parts as necessary.
Fuel Tank Cap Gasket
Visually inspect for cracks, deterio
ration and damage and replace if
necessary.
Nuts and Bolts on Chassis
Check that tightness of the seat
mounting bolts and front/rear suspen
sion member retaining bolts matches
torque measurements specified in the
Repair Manual.
Power Steering Fluid (ES)
When inspecting, visually check the
power steering fluid level on the see
through reservoir. Add fluid as neces
sary. For fluid specifications, refer to
your
Owner's Manual.
Rack and Pinion Assembly
Inspect the rack and pinion assembly
for signs of leakage, damage and
loose electrical connections. Tighten
connections and if you discover any
leakage or damage, have it repaired
immediately by a qualified technician.
Road Test
While driving the vehicle, check for
proper operation of engine, transmis
sion, brakes and steering. Also check
the parking brake, and check for
abnormal noise or vibration from any
part of the vehicle.
