2011 Lexus ES350 wheel size

SCHEDULED MAINTENANCE LOG
MAINTENANCE
150 Months or 125,000 Miles
Replace engine oil and oil filter; reset
reminder light
Rotate tires1
Visually inspect brake pads, calipers and rotors
Check installation of driver’s floor mat
Roadtest vehicle
Additional Maintenance Required
If You Drive Primarily Under the
Following Conditions
Driving on dirt roads or dusty roads:
Inspect axle shaft boots
Inspect ball joints and dust covers
Inspect engine air filter
Inspect steering linkage and boots
Tighten nuts and bolts on chassis
Driving while towing:
Tighten nuts and bolts on chassis (ES)
Date: _________ Mileage: _________
Notes:
156 Months or 130,000 Miles
Replace engine oil and oil filter; reset
reminder light
Rotate tires1
Inspect engine coolant (see page 69)
Measure thickness of brake pads and rotors
(LS 460 with Sport Package)
Replace air conditioner filter (LS)
Replace Smart Key battery
Visually inspect brake pads, calipers and rotors
Check installation of driver’s floor mat
Roadtest vehicle
Additional Maintenance Required
If You Drive Primarily Under the
Following Conditions
Driving on dirtroads or dusty roads:
Inspect axle shaftboots
Inspect ball joints and dust covers
Inspect engine air filter
Inspect steering linkage and boots
Tighten nuts and bolts on chassis
Driving while towing:
Tighten nuts and bolts on chassis (ES)
Date: _________ Mileage: _________
Notes:
Scheduled Maintenance Log64
1Applies tomodels with same size front and rear tires and wheels.

SCHEDULED MAINTENANCE LOG
MAINTENANCE
168 Months or 140,000 Miles
Replace engine oil and oil filter; reset
reminder light
Rotate tires1
Measure thickness of brake pads and rotors
(LS 460 with Sport Package)
Replace air conditioner filter (LS)
Replace Smart Key battery
Visually inspect brake pads, calipers and rotors
Check installation of driver’s floor mat
Roadtest vehicle
Additional Maintenance Required
If You Drive Primarily Under the
Following Conditions
Driving on dirtroads or dusty roads:
Inspect axle shaftboots
Inspect ball joints and dust covers
Inspect engine air filter
Inspect steering linkage and boots
Tighten nuts and bolts on chassis
Driving while towing:
Tighten nuts and bolts on chassis (ES)
Date: _________ Mileage: _________
Notes:
174 Months or 145,000 Miles
Replace engine oil and oil filter; reset
reminder light
Rotate tires1
Inspect engine coolant (see page 69)
Visually inspect brake pads, calipers and rotors
Check installation of driver’s floor mat
Roadtest vehicle
Additional Maintenance Required
If You Drive Primarily Under the
Following Conditions
Driving on dirt roads or dusty roads:
Inspect axle shaft boots
Inspect ball joints and dust covers
Inspect engine air filter
Inspect steering linkage and boots
Tighten nuts and bolts on chassis
Driving while towing:
Tighten nuts and bolts on chassis (ES)
Date: _________ Mileage: _________
Notes:
Scheduled Maintenance Log66
1Applies tomodels with same size front and rear tires and wheels.

EXPLANATION OF MAINTENANCE ITEMS
MAINTENANCE
Scheduled MaintenanceLog71
Spark Plugs
Replace at specified interval. Install
new plugs of the same type as origi
nally equipped. A qualified technician
should perform this operation. To
ensure optimum engine performance
on ES 350, replace only with Denso
FK20HR11 plugs or equivalent.
Steering Linkage and Boots
With the vehicle stopped, check for
excessive freeplay in the steering
wheel. Inspect the linkage for bending
and damage and the dust boots for
deterioration, cracks and damage.
Replace any damaged parts. A quali
fied technician should perform these
operations.
Timing Chain
The timing chain requires no periodic
inspection.
Tire Rotation
See your Owner’s Manualfor tire
rotation requirements. Check tire
pressure and check tires for damage
and uneven wear. If the vehicle is
equipped with a spare tire, check the
condition and pressure of the spare.
TirePressure Warning Sensors
A tirepressure sensor is mounted on
each fullsize wheel. These sensors
do not require periodic maintenance.
When a sensor’s longlife lithium bat
tery becomes discharged, the battery
should be replaced by a qualified
technician following procedures in
Lexus service and repair publications.
Transfer Case/Transmission
Inspect each transfer case/transmis
sion component for signs of leakage.
If you discover any leakage, have it
repaired immediately by a qualified
technician.
Note: The transfer case/transmission
and transmission fluid are a complete
ly sealed unit. Therefore, periodic
checks and replacement of the trans
mission fluid arenot required, and
thereis no dipstick on the transmis
sion. Any repairs that require adding
or replacing fluid should be per
formed by a qualified technician fol
lowing procedures in Lexus service
and repair publications.