2011 JEEP LIBERTY display

[x] Cancel search: display

Page 178 of 542

JEEP LIBERTY 2011 KK / 2.G Owners Manual The ParkSenseWarning Display is located in the Instru-
ment cluster ’s EVIC display. It provides both visual and
audible warnings to indicate the distance between the
rear fascia/bumper and the det

Page 179 of 542

JEEP LIBERTY 2011 KK / 2.G Owners Manual The system will indicate a detected obstacle by showing
three solid arcs and will produce a one-half second tone.
As the vehicle moves closer to the object the EVIC
display will show fewer arcs and th

Page 180 of 542

JEEP LIBERTY 2011 KK / 2.G Owners Manual The vehicle is close to the obstacle when the EVIC display
shows one flashing arc and sounds a continuous tone.
The following chart shows the warning alert operation
when the system is detecting an ob

Page 181 of 542

JEEP LIBERTY 2011 KK / 2.G Owners Manual WARNING ALERTS
Rear Distance (in/cm) Greater than
79 in (200 cm) 79-39 in
(200-100 cm) 39-25 in
(100-65 cm) 25-12 in
(65-30 cm) Less than
12 in (30 cm)
Audible Alert Chime None
Single 1/2
Second Tone

Page 182 of 542

JEEP LIBERTY 2011 KK / 2.G Owners Manual Enabling And Disabling ParkSense
ParkSensecan be enabled and disabled with a switch
located in the switch bank of the instrument panel or
through the Customer-Programmable Features section of
the EV

Page 183 of 542

JEEP LIBERTY 2011 KK / 2.G Owners Manual Cleaning The ParkSenseSystem
Clean the ParkSense sensors with water, car wash soap
and a soft cloth. Do not use rough or hard cloths. Do not
scratch or poke the sensors. Otherwise, you could dam-
ag

Page 184 of 542

JEEP LIBERTY 2011 KK / 2.G Owners Manual object as a sensor problem, causing the “SERVICE
PARK ASSIST SYSTEM” message to be displayed in
the EVIC.
CAUTION!
•ParkSenseis only a parking aid and it is unable
to recognize every obstacle,

Page 185 of 542

JEEP LIBERTY 2011 KK / 2.G Owners Manual WARNING! (Continued)
•Before using the ParkSenseRear Park Assist
System, it is strongly recommended that the ball
mount and hitch ball assembly is disconnected
from the vehicle when the vehicle is
Page:   < prev 1-8 9-16 17-24 25-32 33-40 41-48 ... 72 next >