2011 JEEP COMPASS headlight bulb

Turn Signals
Move the multifunction lever up or down and the arrows
on each side of the instrument cluster flash to show
proper operation of the front and rear turn signal lights.NOTE:
If either light remains on and does not flash, or
there is a very fast flash rate, check for a defective outside
light bulb. If an indicator fails to light when the lever is
moved, it would suggest that the indicator bulb is
defective.
High/Low Beam Switch
Push the multifunction lever away from you to switch
the headlights to high beam. Pull the multifunction lever
toward you, to switch the headlights back to low beam.
Flash-To-Pass
You can signal another vehicle with your headlights by
lightly pulling the multifunction lever toward you. This
will turn on the high beam headlights until the lever is
released.
NOTE: If the multifunction lever is held in the flash-to-
pass position for more than 20 seconds, the high beams
will shut off. If this occurs, wait 30 seconds for the next
flash-to-pass operation.
Turn Signals
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149

alert you to turn the signals off. If either indicator flashes
at a rapid rate, check for a defective outside light bulb.
9. High Beam IndicatorThis indicator shows that the high beam head-
lights are on. Push the multifunction lever forward
to switch the headlights to high beam, and pull toward
yourself (normal position) to return to low beam.
10. Anti-Lock Brake (ABS) Light This light monitors the Anti-Lock Brake System
(ABS). The light will turn on when the ignition
switch is turned to the ON/RUN position and
may stay on for as long as four seconds.
If the ABS light remains on or turns on while driving, it
indicates that the Anti-Lock portion of the brake system
is not functioning and that service is required. However,
the conventional brake system will continue to operate
normally if the BRAKE warning light is not on. If the ABS light is on, the brake system should be serviced
as soon as possible to restore the benefits of Anti-Lock
brakes. If the ABS light does not turn on when the
ignition switch is turned to the ON/RUN position, have
the light inspected by an authorized dealer.
11. Seat Belt Reminder Light
When the ignition switch is first turned to ON/
RUN, this light will turn on for four to eight
seconds as a bulb check. During the bulb check, if
the driver’s seat belt is unbuckled, a chime will sound.
After the bulb check or when driving, if the driver’s seat
belt remains unbuckled, the Seat Belt Reminder Light
will illuminate and the chime will sound. Refer to
“Occupant Restraints” in “Things To Know Before Start-
ing Your Vehicle” for further information.
194 UNDERSTANDING YOUR INSTRUMENT PANEL

Life of Tires............................ 335
Liftgate (Sedan) .......................... 35
Liftgate Window Wiper/Washer ............. 182
Light Bulbs .......................... 87,434
Lights .............................. 87,147
Airbag .................... 67,68,73,85,193
Alarm ............................ 197
Anti-Lock .......................... 194
Back-Up ........................... 436
Brake Assist Warning .................. 317
Brake Warning ...................... 195
Bulb Replacement .................... 435
Cargo ............................. 177
Center Mounted Stop .................. 436
Daytime Running .................... 148
Dimmer Switch, Headlight .............. 147
Electronic Stability Program (ESP) Indicator . . 317
Engine Temperature Warning ............ 195
Exterior ............................ 87 Fog .........................
148,204,435
Headlight Switch ..................... 147
Headlights ......................... 147
High Beam Indicator .................. 194
Instrument Cluster ................... 147
License ............................ 436
Lights On Reminder .................. 148
Low Fuel .......................... 193
Malfunction Indicator (Check Engine) ...... 203
Map Reading ....................... 150
Oil Pressure ........................ 193
Seat Belt Reminder ................... 194
Security Alarm (Theft Alarm) ..........18,197
Theft Alarm (Security Alarm) ............ 197
Tire Pressure Monitoring (TPMS) ......... 199
Traction Control ..................... 317
Turn Signal ................. 87,147,149,436
Voltage ............................ 192
Warning (Instrument Cluster Description) . . . 192
478 INDEX