2
J A G U A R X JJ A G U A R X J J A G U A R X J
Vehicle access
Jaguar Smart Key
Emergency key access
If there is a problem with the Smart Key and it will not
unlock the vehicle, use the emergency key access
procedure. Press the Smart Key release button and
open. Remove the key blade and unfold it.
Insert the blade into the slot beneath the front left\b
hand door lock cover. Lift slightly and twist to remove
the cover. Insert the key into the exposed lock and
turn it towards the rear of the vehicle then release it
to unlock.
If the vehicle security system was previously armed
with the Smart Key, the alarm will sound. To disarm
the alarm, press the START STOPbutton while the
Smart Key is inside the vehicle.
Unlocking mode alternatives
Single\bpoint entry allows only the driver’s door to
unlock with a single press. A second press unlocks
all other doors and the luggage area.
Multi\bpoint entry will unlock all doors and luggage
area with a single press.
To change between modes, with the vehicle
unlocked, press the lock and unlock buttons
simultaneously for three seconds. The hazard
warning lamps will flash twice to confirm the
change. Mode change can also be made via the
instrument panel menu control.
• Press once to lock the vehicle and arm the exterior alarm.
• Multi\bpoint entry \b Press once to disarm the alarm, unlock all doors and unlock
the trunk.
• Press and hold to unlock all doors and open the windows (Global opening).
• Press once to switch the headlamps on for 25 seconds. Press again to
switch off.
• Press to open only the trunk. The rest of the security system remains active.
• Press and hold for three seconds to activate/cancel the panic alarm.
Operating note
If the Smart Key fails
to operate, hold it
against the facia
below the auxiliary
switch pack. Start the
engine as normal
(see page 5). The
Smart Key can now
be removed.
To unlock the vehicle and disarm the alarm first
ensure that the Smart Key is outside the vehicle but
within 3 ft (\f metre) .
Press a door handle button or trunk release button.To lock the vehicle and arm the alarm first ensure that
the Smart Key is outside the vehicle but within 3 ft (\f
metre) .
Press a door handle button once to single lock.
Keyless entry/exit
JJM 18 96 34 111:X351 10MY.qxd 05/07/2010 15:04 Page 2
Starting and driving
J A G U A R X JJ A G U A R X J J A G U A R X J
\f
Ignition only on:
• With the Jaguar Smart Key inside the vehicle, press the START STOP button.
• A second press will switch off the ignition.
Engine start
• The selector lever must be in Park orNeutral position.
• With the footbrake depressed, press and release the START STOP button to start the engine.
• Press again to stop the engine and switch off the ignition.Rolling start
If the engine is switched off while the vehicle is
moving, it can be restarted by selecting Nposition
then pressing the START STOPbutton.
Driver information is displayed on a TFT Virtual
Instrument Panel.
The panel appears blank until the ignition is on, at
which point the panel will progress through the initial
start up display. Information symbols will illuminate
while system checks are made.
Many features of the display can be changed to suit
personal preferences. Other features, such as the
speedometer, can be altered to suit the driving
situation. The speedometer can be configured for
KPH or MPH via the Vehicle Settings menu.
To access the main menu in the instrument panel,
press any button on the right side steering wheel
control. Use the direction controls to move through
the menu and subsequent options. Press OKto
confirm your selections.Main Menu
Display settings Trip computer
Vehicle set up
Show warnings
Service Menu
Operating note
The engine will continue to run even if the Smart
Key is removed from the vehicle by more than 3 ft
(\f metre). However, if the engine is stopped, it
cannot be restarted until the Smart Key is returned
to the vehicle.
Engine start and stopSee page 3, item 6
Virtual instrument panel
JJM 18 96 34 111:X351 10MY.qxd 05/07/2010 15:04 Page 5
J A G U A R X JJ A G U A R X J J A G U A R X J
9
Driving aids
Winter mode, Dynamic mode and Dynamic Stability
Control (DSC) allow the driver to more finely tune the
vehicle driving characteristics to suit prevailing
conditions.
When Reverse is selected, the rear and front parking
aids and rear view camera will activate.
The touch screen will display a vehicle graphic and
indicate the approximate distance to any object
detected. An audible alert will increase in frequency
as the object is approached.
When moving forward into a space,
activate the front sensors with the parking
aid switch in the overhead panel.
Alternatively, select Rthen Drive.
Audible alert volume can be adjusted via the touch
screen. Select the Home MenuthenSetup followed
by System . Now select Volume presets. Use the +
or \b softkeys alongside Parking aidto adjust volume.Rear view camera
Activates when Reverse is selected. Guidance lines
to aid reversing appear on the touch screen.
The camera is deactivated when Drive is selected
and vehicle speed exceeds \f0 mph (\f6 km/h).
Blind spot monitoring
Cancelling the parking aid screen
Touch the screen to return to the previous view.
Each mirror displays amber icons to warn of passing
vehicles in adjacent lanes. The monitored area
extends approximately 20 ft (6 meters) behind your
rear wheels and 8.2 ft (2.5 meters) to the sides.
It switches on automatically at speeds above \f0mph
(\f6km/h) while in a forward gear.
Parking aidsSee page 3, item 40
1\bWinter mode. Use in slippery road conditions.
Selects 2nd gear for driving away, moderates engine
response and modifies gear change strategy to
ensure maximum possible traction is achieved.
\f\b Dynamic mode. Delivers a high performance
driving experience. If Sport mode is now used with
paddle gear selection, there is no automatic gear
change, even if the rev limit is reached.
3\b DSC. The default condition at engine start is DSC
on and is designed to control vehicle stability.
TracDSC is an alternative setting that optimises the
DSC settings for maximum traction in difficult
conditions. To select TracDSC, depress the DSC
switch for less then \f0 seconds. Touch the switch
again to return to DSC. To turn DSC off, depress the
switch for more than \f0 seconds.
1
2
3
JaguarDrive controlSee page 3, items 13,16and 17
JJM 18 96 34 111:X351 10MY.qxd 05/07/2010 15:04 Page 9
Turn on the audio system. On the touch screenHome
Menu, touch the Audio/Video option. The last used
audio source controls will be displayed. If another
audio source is displayed, touch the Radiosoftkey.
1\b Touch to change to radio or to view wavebands.
The + key will change to \b. Touch a waveband to
select. Touch \b to exit waveband selection.
\f\b Move up or down to the next or previous station.
3\b View information broadcast by the radio station,
e.g., email addresses.
J A G U A R X J J A G U A R X J J A G U A R X J
Touch screen
\b0
To turn the touch screen on or off, press
the hard button below the screen.
Press to display the Home Menu.
HOME MENU
External temp.Audio OFF
Left Right
PhoneSetup
Shortcut 1
Shortcut 2
Shortcut 3
Valet
Northumberland Avenue
1 hr 5 mins / 45 miles
Audio/Video
Climate
Nav
N
The touch screen requires only light touches.
Excess pressure could result in damage \b
Operating note
Always run the engine during prolonged use of the
touch screen.
AM/FM Radio
4\b Radio Settings menu.HD Radio can be enabled
here. The Advanced softkey allows favorite stations
to be set for traffic and news information.
5\b Options are available only when an FM waveband
is selected. All available FM stations will be listed.
5\b Autostore replacesStation list when an AM
waveband is selected. Select to store the six
strongest AM stations. These stations will be
available on the preset keys.
6\b Enter a station frequency. When the final digit is
entered the station will be tuned to.
7\b Japan only.
8\b Preset softkeys. Can store six stations for each
waveband. Touch and hold a softkey to store the
current radio station.
RADIO: FM 1
Radio
SAT radio My music Settings
Station list
Traffic
Preset 1
Preset 3
Preset 2
Audio/VidClimate Phone Nav
Wave bandRadio station
Programme
Preset 4
Preset 6
Preset 5
Frequency
input1. 2.
3.
4. 5.
6.
2
4
6
5
7
13
8
Home menu selections
Phone\bFor Phone settings, Digit Dial, Phonebook
and Last \f0 numbers dialled.
Setup\b Personalise Screen view, System settings and
Vehicle settings.
Audio/Video\b Select any of the audio and video
sources, set personal preferences and store stations
to pre\bsets.
Climate\b Climate control primary settings are made
from the hard controls below the touch screen.
For secondary controls select the Climatemenu.
Nav\b Touch Agree to move to the navigation main
menu or select Languageif you need to select a
different navigation language.
Telephone icon. Touch to end a phone call. While
using the navigation system, touch to repeat the last
instruction.
Heated/ventilated seats icons. Shows the current
status of the seats.
Valet\b Select valet mode to lock the trunk and glove
box when using attendant parking.
When returning to the vehicle, touch Valet again and
follow the on\bscreen instructions.
JJM 18 96 34 111:X351 10MY.qxd 05/07/2010 15:04 Page 10
Satellite radio subscription service
Use channel \f84 to preview satellite radio. When the
preview time expires you will need to subscribe to
SIRIUS to enable further satellite reception.
1\b Touch to select the satellite bands. Touch the +
icon to move through SAT \f, 2 and 3.
\f\b Use the seek arrows to move up or down to the
next or previous channel.
3\b Channel information.
4\b Select to make personal settings in Options,
Channel skip andParental lock areas.
5\b View a list of available categories.
6\b Select to access the touch pad. Enter any 3 digit
channel number then select OK.
7\b Touch to view a list of channel categories. Select
one to display full details of that channel and the
current track.
J A G U A R X J J A G U A R X J J A G U A R X J
\b\b
HD RadioTM
SAT 1
Radio
SAT radio My music Settings
Channel list
Browse
Preset 1
Preset 3
Preset 2
Audio/VidClimate Phone Nav
Ch nnnChannel name (20)
Info field (32)
Preset 4
Preset 6
Preset 5
1. 2.
3.
4. 5.
6.
Add song
Channel input
Cat Name (8)
9
4
6
5
7
8
231
HD radio can provide much improved audio quality
when compared to normal AM/FM reception. It can
also provide additional information about available
channel services.
HD radio broadcasts are synchronized with AM/FM
broadcasts. The great advantage here is that when
HD radio is activated and standard AM/FM is in use,
if an HD signal is detected the radio will gradually
transfer to the digital broadcast. No action is required
although a difference in volume may be noticed.
When an HD radio channel is being received, the
station name is prefixed with HD.If the prefix isHD1, further sub channels are available
from that channel broadcaster.
To enable HD radio:
1\b Select the Settingssoftkey on the Radiomenu
screen.
\f\b Select HD On to activate.
In areas of poor reception, automatic switching
between HD and AM/FM will be more frequent. If this
becomes unacceptable, either tune to an alternative
channel or switch HD radio off via the Settings
softkey.
Touch screen
Note: If there is more information than can fit in the
display area, select 3.
8\b Store the current track information into memory. If
the audio system subsequently finds a stored track
playing on a subscribed channel, notification will be
given.
9\b Channel presets. Each SATband has 6 preset
softkeys. Touch and hold a softkey to store the
current channel. A brief touch will access the stored
channel.
Note: Use the seek buttons on the steering wheel to
find preset channels.
Activating satellite radio
To activate satellite radio:
1\b Call SIRIUS on the displayed telephone number.
\f\b Provide them with the ID number, also displayed
on screen.
You will also need your credit card.
Ensure you are parked in an area with clear view of
the sky while activation takes place.
Activation can take up to \f5 minutes.
Satellite radio
JJM 18 96 34 111:X351 10MY.qxd 05/07/2010 15:04 Page 11
Heating and ventilation
J A G U A R X JJ A G U A R X J J A G U A R X J
\b3
Climate controlSee page 3, items10, 11, 12and20
1\bAUTO. This is the recommended operating mode.
Automatically adjusts air conditioning, blower speed,
air intake and airflow distribution to maintain the
selected temperature(s). Helps to prevent fogging.
\f\b Temperature control. Temperature is displayed on
the touch screen.
3\b Defrost. Fastest method to remove frost or heavy
fogging from the windshield.
4\b Recirculation. Helps prevent fumes from entering.
5\b Blower speed. Rotate to adjust airflow speed
through the vents.
6\b Press for cooled and dehumidified air.
7\b Heated windshield.
8\b Heated rear screen.
Touch screen controls
To access touch screen control, touch Climateon
the Home menu screen.
1\b Air distribution to feet.
\f\b Air distribution to face.
3\b Air distribution to screen.
4\b Settings. Air quality sensor sensitivity and
temperature scale.
5\b Front seats. Temperature, ventilation and
massage settings.
6\b Rear climate. Displays rear climate control menu.
7\b Sync climate. Synchronises all front and rear
settings to match the driver’s.
8\b Climate off. When climate control is turned off,
select again to turn on.
SettingsRightA/CAuto
Ext
LeftFRONT CLIMATE
Climate OFF
Nav
Phone
Climate
Audio/Vid Front Seats
Rear Climate
Sync
climate
Ext3
7
2
1
4
6
5
8
External water deposits
The air conditioning system removes moisture from
the air and deposits the excess water beneath the
vehicle. Puddles may form but this is normal and
no cause for concern.Operating note
Seat heating and ventilating will operate only while
the engine is running. This is to prevent the battery
becoming discharged.
The touch screen controls for rear climate are very
similar to those for the front climate. Areas of
difference are:
1\b AUTO. This is the recommended operating mode.
\f\b Temperature adjustment. Select red to increase
and blue to decrease temperature.
3\b Rear seats temperature and ventilation control.
4\b Rear control panel lock. Will disable the rear
climate control panel. Select again to re\benable.
5\b Blower speed. Use the + and \b softkeys.
RightAuto
Auto
Auto
A/CAuto
Ext
LeftREAR CLIMATE
Nav
Phone
Climate
Audio/Vid Rear seats
Rear panel
lock
1
42
5
3
Rear climate control from the touch screen
67
22
143
1
58
JJM 18 96 34 111:X351 10MY.qxd 05/07/2010 15:04 Page 13
\b4
J A G U A R X JJ A G U A R X J J A G U A R X J
Navigation
On initial activation, ensure that both the correct country and search area have been selected.
For more information refer to the Navigation section of the Owner’s Handbook.
Setting a destination address
1\b From the navigation MENUscreen, select Dest\b
entry thenAddress .
\f\b Use the keyboard to enter the town name. If there
is a choice of same name towns, select from the
displayed list. Now enter the address details.
Again a list will be displayed. Select from the list
to confirm.
3\b When entry is complete, touch OK. When you are
ready to start route calculation, touch Destination.
4\b The screen displays Route 1. To view
alternative routes touch 3 Routes. To use an
alternative route, touch one of the selections.
5\b Touch GOto commence guidance.
The selected route will be displayed and guidance will
begin. At the destination, confirmation is given.
To repeat the last voice instruction, touch the softkey
at the bottom left corner of the screen.
When a destination is set on the navigation touch screen
and guidance is commenced, a simplified graphic guide
is displayed in the instrument panel. It gives turn by turn
information about the next part of the journey.
If the map is moved away from your
current location, the position icon will be
replaced by a touch button near the top left of the
screen. Touch to bring the current location map
back into view.
Nav
Input town name
ADDRESS
List
Q
ABC AS D F G HJ KL
More ZXCV
BN M
, []Delete
WE R T Y U I O P
0 9 ****
Audio/Vid
Climate PhoneNav
MENU
Nav Setup
Route options
Dest. EntryDisplay POI
Detour
Audio/VidClimatePhoneNav
Return to map
Stop guidance
Route VG
Stored Loc
Nav
TMC
ClimatePhoneNav
TMC3 Routes
1024 kmChange route
GO
15 km 4 km
Total 9999 mi
Time:15m
Distance:106kmETA:8.24am
Route on search condition
Audio/VidNav
Cancelling guidance
To cancel guidance, select the navigation MENUthen
Stop Guidance .
A423 Warwick Road
Instrument panel navigation
Touch screen navigation
JJM 18 96 34 111:X351 10MY.qxd 05/07/2010 15:04 Page 14
Telephone
J A G U A R X JJ A G U A R X J J A G U A R X J
\b\f
Connection of compatible Bluetooth phones must be
made with ignition on or engine running.
Pairing and connecting using the touch screen
Up to \f0 cell phones can be paired. Ensure that your
Bluetooth phone is in ‘discoverable’ mode, sometimes
referred to as ‘find me’ mode. See your operating
instructions for more information.
1\b From the touch screen HOME MENU, select
Phone . A new menu will be displayed.
\f\b Select Search new\b
3\b Identify your cell phone in the list then select the
corresponding Pair and connect option.
4\b When prompted, enter the four digit code into your
cell phone. See your operating instructions for
more information.
5\b When paired and connected to the system, a
confirmation messsage will be displayed.
Changing a connected cell phone
To change from the currently connected cell phone to
another that has already been paired, follow the
steps below:
1\b From the HOME MENU, select Phone.
\f\b Now select Change phone.
3\b Identify your phone and select the corresponding
Connect option.
4\b A confirmation message will be displayed.
Downloading phonebook entries
1\b From the Phonemenu, select Settings.
\f\b Select Phone options .
3\b Select Phonebook .
4\b Select Auto download Off orOn.
The vehicle phonebook will be updated each time a
cell phone is docked to the system.
Jaguar Bluetooth Connectivity
For the latest compatibility information, refer to
www\bjaguar\bcom/us/en/xf/models_pricing/features
/features_convenience\bhtm\bCalls via the touch screen
Making a call
1\b Touch the telephone icon at the bottom of the
screen.
\f\b Enter the number using the on\bscreen keypad.
3\b Touch icon on the screen to make the call.
4\b To end a call touch .
Calls via the steering wheel controls
1\b Press and release to make or accept a call or to
access the last \f0 dialled numbers. Press and hold to
access the phonebook.
\f, 3\b Use the + and \b buttons to adjust volume.
4\b Press to end or reject a call.
Telephone echo
If echo is experienced when using the phone,
reduce the audio system volume during the call.
PHONE
Digit Dial
Phonebook Last 10 Settings
In call menu
7 9
8
Audio/Vid ClimatePhoneNav
Phone User friendly name
*#
0 +
1
3
2
4 6
5
Vodafone
Delete
ABC DEF
GHI JKL MNO
PQRS TUV WXYZ
1
2
34
Bluetooth selection
When the starter is turned on, the vehicle searches
for up to \f0 previously connected cell phones,
starting with the most recent connection.
Bluetooth® phones
JJM 18 96 34 111:X351 10MY.qxd 05/07/2010 15:04 Page 15