2011 INFINITI G ABS

Warning light and display
Condition A :
The chime sounds and the Intelligent Cruise
Control system is canceled automatically in the
conditions described below. Part of the system
display will come on or blink, making it impos-
sible to set.
●When the VDC is turned off
● When the ABS or VDC (including the traction
control system) operates
● When a tire slips
● When the SNOW mode switch is turned on ●
When strong light (sunlight, etc.) is directly
shining on the front of the vehicle
Action to take :
When the conditions listed above are no longer
present, turn the system off using the Intelli-
gent Cruise Control MAIN Switch. Turn the ICC
system back on to use the system.
Condition B :
When the sensor window is dirty, making it
impossible to detect a vehicle ahead, the ICC
system is automatically canceled.
The chime sounds and the ICC system warning
light (orange) will come on and the “CLEAN
SENSOR” indicator will appear.
Action to take :
If the warning light comes on, park the vehicle
in a safe place, turn the engine off. Clean the
sensor window with a soft cloth and then
perform the settings again.
SSD0614SSD0615
5-38Starting and driving

●The pre-pressure function ceases when the
following conditions are met:
a) When the driver depresses the accel-
erator pedal or the brake pedal.
b) If the driver does not operate the ac- celerator or brake pedal within ap-
proximately 1 second.
●The sensor will not detect:a) Pedestrians or objects in the roadway
b) Oncoming vehicles in the same lane
c) Motorcycles traveling offset in the
travel lane as illustrated
WARNING
●This system is only an aid to assist braking
operation and is not a collision warning or
avoidance device. It is the driver’s responsi-
bility to stay alert, drive safely and be in
control of the vehicle at all times. ●
As there is a performance limit to the Pre-
view Function, never rely solely on this sys-
tem. This system does not correct careless
inattentive or absent-minded driving, or
overcome poor visibility in rain, fog, or other
bad weather. Reduce vehicle speed by de-
pressing the brake pedal, in order to main-
tain a safe distance between vehicles.
● The system may not detect the vehicle in
front of you in certain road or weather condi-
tions. The Preview Function may not operate
properly under the following conditions. The
vehicle is still driveable under normal condi-
tions and the Brake Assist will operate.
– When rain, snow or dirt adhere to the sys- tem sensor
– When strong light (for example, at sun- rise or sunset) is directly shining on the
front of the vehicle
– Winding or hilly roads may cause the sen- sor to temporarily not detect a vehicle in
the same lane or may detect objects or
vehicles in other lanes.
– Vehicle position in the lane may cause the sensor to temporarily not detect a vehicle
in the same lane or may detect objects or
vehicles in other lanes.
SSD0338
Starting and driving5-51

ANTI-LOCK BRAKING SYSTEM (ABS)
WARNING
●The Anti-lock Braking System (ABS) is a so-
phisticated device, but it cannot prevent ac-
cidents resulting from careless or dangerous
driving techniques. It can help maintain ve-
hicle control during braking on slippery sur-
faces. Remember that stopping distances on
slippery surfaces will be longer than on nor-
mal surfaces even with ABS. Stopping dis-
tances may also be longer on rough, gravel
or snow covered roads, or if you are using
tire chains. Always maintain a safe distance
from the vehicle in front of you. Ultimately,
the driver is responsible for safety.
● Tire type and condition may also affect brak-
ing effectiveness.
– When replacing tires, install the specified size of tires on all four wheels.
– When installing a spare tire, make sure that it is the proper size and type as speci-
fied on the Tire and Loading Information
label. See “TIRE AND LOADING INFORMA-
TION LABEL” in the “9. Technical and con-
sumer information” section of this
manual. – For detailed information, see “WHEELS
AND TIRES” in the “8. Maintenance and
do-it-yourself” section of this manual.
The Anti-lock Braking System (ABS) controls the
brakes so the wheels do not lock during hard
braking or when braking on slippery surfaces.
The system detects the rotation speed at each
wheel and varies the brake fluid pressure to
prevent each wheel from locking and sliding. By
preventing each wheel from locking, the system
helps the driver maintain steering control and
helps to minimize swerving and spinning on
slippery surfaces.
Using the system
Depress the brake pedal and hold it down.
Depress the brake pedal with firm steady pres-
sure, but do not pump the brakes. The ABS will
operate to prevent the wheels from locking up.
Steer the vehicle to avoid obstacles.
WARNING
Do not pump the brake pedal. Doing so may
result in increased stopping distances.
Self-test feature
The ABS includes electronic sensors, electric
pumps, hydraulic solenoids and a computer.
The computer has a built-in diagnostic feature
that tests the system each time you start the
engine and move the vehicle at a low speed in
forward or reverse. When the self-test occurs,
you may hear a “clunk” noise and/or feel a
pulsation in the brake pedal. This is normal and
does not indicate a malfunction. If the computer
senses a malfunction, it switches the ABS off
and illuminates the ABS warning light on the
instrument panel. The brake system then oper-
ates normally, but without anti-lock assistance.
If the ABS warning light illuminates during the
self-test or while driving, have the vehicle
checked by an INFINITI retailer.
Starting and driving5-53

Normal operation
The ABS operates at speeds above 3 to 6 MPH
(5 to 10 km/h).
When the ABS senses that one or more wheels
are close to locking up, the actuator rapidly
applies and releases hydraulic pressure. This
action is similar to pumping the brakes very
quickly. You may feel a pulsation in the brake
pedal and hear a noise from under the hood or
feel a vibration from the actuator when it is
operating. This is normal and indicates that the
ABS is operating properly. However, the pulsa-
tion may indicate that road conditions are haz-
ardous and extra care is required while driving.The Vehicle Dynamic Control (VDC) system uses
various sensors to monitor driver inputs and
vehicle motion. Under certain driving condi-
tions, the VDC system helps to perform the
following functions.
●
Controls brake pressure to reduce wheel slip
on one slipping drive wheel so power is
transferred to a non slipping drive wheel on
the same axle.
● Controls brake pressure and engine output
to reduce drive wheel slip based on vehicle
speed (traction control function).
● Controls brake pressure at individual wheels
and engine output to help the driver main-
tain control of the vehicle in the following
conditions:
– understeer (vehicle tends to not follow the steered path despite increased steer-
ing input)
– oversteer (vehicle tends to spin due to certain road or driving conditions).
The VDC system can help the driver to maintain
control of the vehicle, but it cannot prevent loss
of vehicle control in all driving situations.
When the VDC system operates, the VDC warn-
ing light
in the instrument panel flashes
so note the following: ●
The road may be slippery or the system may
determine some action is required to help
keep the vehicle on the steered path.
● You may feel a pulsation in the brake pedal
and hear a noise or vibration from under the
hood. This is normal and indicates that the
VDC system is working properly.
● Adjust your speed and driving to the road
conditions.
See “Vehicle Dynamic Control (VDC) warning
light” in the “2. Instruments and controls”
section.
If a malfunction occurs in the system, the VDC
warning light
illuminates in the instru-
ment panel. The VDC system automatically
turns off.
The VDC OFF switch is used to turn off the VDC
system. The VDC off indicator
illuminates
to indicate the VDC system is off. When the VDC
switch is used to turn off the system, the VDC
system still operates to prevent one drive wheel
from slipping by transferring power to a non
slipping drive wheel. The VDC warning light
flashes if this occurs. All other VDC
functions are off, and the VDC warning light
will not flash. The VDC system is auto-
matically reset to on when the ignition switch is
placed in the off position then back to the on
position.
VEHICLE DYNAMIC CONTROL (VDC)
SYSTEM
5-54Starting and driving

See “Vehicle Dynamic Control (VDC) warning
light” in the “2. Instruments and controls”
section and “Vehicle Dynamic Control (VDC) off
indicator light” in the “2. Instruments and con-
trols” section.
The computer has a built-in diagnostic feature
that tests the system each time you start the
engine and move the vehicle forward or in
reverse at a slow speed. When the self-test
occurs, you may hear a “clunk” noise and/or
feel a pulsation in the brake pedal. This is
normal and is not an indication of a malfunc-
tion.
WARNING
●The VDC system is designed to help the
driver maintain stability but does not pre-
vent accidents due to abrupt steering opera-
tion at high speeds or by careless or danger-
ous driving techniques. Reduce vehicle
speed and be especially careful when driving
and cornering on slippery surfaces and al-
ways drive carefully. ●
Do not modify the vehicle’s suspension. If
suspension parts such as shock absorbers,
struts, springs, stabilizer bars, bushings
and wheels are not INFINITI recommended
for your vehicle or are extremely deterio-
rated, the VDC system may not operate prop-
erly. This could adversely affect vehicle han-
dling performance, and the VDC warning
light
may illuminate.
● If brake related parts such as brake pads,
rotors and calipers are not INFINITI recom-
mended or are extremely deteriorated, the
VDC system may not operate properly and
the VDC warning light
may illuminate.
● If engine control related parts are not
INFINITI recommended or are extremely de-
teriorated, the VDC warning light
may
illuminate.
● When driving on extremely inclined surfaces
such as higher banked corners, the VDC sys-
tem may not operate properly and the VDC
warning light
may illuminate. Do not
drive on these types of roads.
● When driving on an unstable surface such as
a turntable, ferry, elevator or ramp, the VDC
warning light
may illuminate. This is
not a malfunction. Restart the engine after
driving onto a stable surface. ●
If wheels or tires other than the INFINITI rec-
ommended ones are used, the VDC system
may not operate properly and the VDC warn-
ing light
may illuminate.
● The VDC system is not a substitute for winter
tires or tire chains on a snow covered road.
Starting and driving5-55

NOTE:
If the extended storage switch malfunctions, or
if the fuse is open, it is not necessary to replace
the switch. In this case, remove the extended
storage switch and replace it with a new fuse of
the same rating.
How to remove the extended storage switch:
1. To remove the extended storage switch,be sure the ignition switch is in the OFF or
LOCK position.
2. Be sure the headlight switch is in the OFF position.
3. Remove the fuse box cover.
4. Pinch the locking tabs
1found on each
side of the storage switch.
5. Pull the storage switch straight out from the fuse box
2.
Replace the battery as follows:1. Release the lock knob at the back of theIntelligent Key and remove the mechanical
key.
2. Insert a flat-blade screwdriver
A
wrapped with a cloth into the slitBof
the corner and twist it to separate the
upper part from the lower part. 3. Replace the battery with a new one.
Recommended battery: CR2032 or equivalent.
●
Do not touch the internal circuit and
electric terminals as it could cause a
malfunction.
● Hold the battery by the edges. Holding
the battery across the contact points will
seriously deplete the storage capacity.
● Make sure that the + side faces the
bottom of the case.
4. Align the tips of the upper and lower
parts, and then push them together until
it is securely closed.
5. Push the buttons two or three times to check its operation.
SDI1834SDI2042
INTELLIGENT KEY BATTERY REPLACEMENT
8-24Maintenance and do-it-yourself

10 Index
A
ABS (Anti-lock Braking System) ........5-53
Advanced air bag system ............1-46
Air bag system Advanced air bag system ..........1-46
Front passenger air bag and status
light ..................... .1-47
Front-seat mounted side-impact
supplemental air bag system .......1-50
Roof-mounted curtain side-impact
supplemental air bag system .......1-50
Air bag warning labels .............1-53
Air bag warning light ...........1-53, 2-15
Air cleaner housing filter ............8-18
Air conditioner Air conditioner service ...........4-37
Air conditioner specification label .....9-14
Air conditioning system refrigerant and
lubricant recommendations ......4-37, 9-7
Automatic climate control .........4-28
In-cabin microfilter .............4-37
Alarm, How to stop alarm (see vehicle
security system) ............... .2-28
Alcohol, drugs and driving ...........5-7
All-wheel drive (AWD) driving safety
precautions ................... .5-7
All-wheel drive (AWD) ............. .5-44
All-wheel drive (AWD) warning light ......2-11
Antenna .................... .4-83
Anti-lock Braking System (ABS) ........5-53Anti-lock braking system (ABS) warning
light
....................... .2-11
Appearance care Exterior appearance care ..........7-2
Interior appearance care ...........7-4
Armrest ..................... .1-12
Ashtrays (See cigarette lighter and
ashtrays) .................... .2-41
Audible reminders ............... .2-17
Audio operation precautions .........4-38
Audio system ................. .4-38
Steering wheel audio controls .......4-82
Autolight system ............... .2-33
Automatic Automatic adjusting function (front
windows) .................. .2-51
Automatic climate

control ......4-29, 4-31
Automatic transmission fluid (ATF) . . . .8-12
Climate control .............. .4-28
Door locks .................. .3-5
Drive positioner .............. .3-29
Driving with automatic transmission . . .5-12
Moonroof .................. .2-51
Seat positioner .............. .3-29
Average fuel consumption and speed . . . .2-24
Avoiding collision and rollover .........5-5
B
Battery ..................... .8-14
Battery saver system ............2-34
Intelligent Key ............... .8-24Variable voltage control system
......8-16
Before starting the engine ...........5-11
Belts (See drive belts) .............8-17
Bluetooth hands-free phone system
(models with navigation system) . . . . . . .4-84
Bluetooth hands-free phone system
(models without navigation system) .....4-95
Bluetooth streaming audio ..........4-66
Booster seats ................. .1-36
Brake Anti-lock Braking System (ABS) . . . . . .5-53
Brake and clutch fluid ...........8-13
Brake fluid ................. .8-13
Brake system ............... .5-49
Parking brake operation ..........5-18
Warning light ................ .2-11
Break-in schedule ............... .5-43
Brightness control Display ON/OFF button ...........4-7
Instrument panel ............. .2-35
Bulb check/instrument panel .........2-10
Bulb replacement ............... .8-26
C
Cabin air filter ................. .4-37
Capacities and recommended
fuel/lubricants ................. .9-2
Car phone or CB radio .............4-84
Card holder .................. .2-46
Cargo

net retainers .............. .2-48
Catalytic converter, Three way catalyst . . . .5-2

Traveling or registering your vehicle in
another country................. .9-12
Trip computer ................. .2-24
Trip odometer ................. .2-24
Trunk Interior trunk lid release ..........3-20
Light ..................... .2-55
Pass-through ................ .1-12
Trunk lid ................... .3-18
Trunk lid release switch ...........3-18
Trunk net for extra window washer fluid .2-48
Trunk open request switch .........3-19
Trunk release power cancel switch .....3-19
Turn signal switch ............... .2-36
U
Underbody cleaning ............... .7-3
Uniform tire quality grading ..........9-23
USB memory operation .............4-62
V
Vanity mirror .................. .3-29
Vanity mirror lights .............. .2-54
Variable voltage control system ........8-16
Vehicle Dimensions ................. .9-11
Identification number (VIN) .........9-12
Loading information .............9-19
Recovery (freeing a stuck vehicle) .....6-14
Security system .............. .2-27
Vehicle dynamic control (VDC) off
switch .................... .2-39
Vehicle dynamic control (VDC) system . . .5-54 Vehicle information and settings
(display)
................... .4-7
Ventilators ................... .4-27
Voice command (Bluetooth Hands-Free
Phone System) ................ .4-100
Voice command (INFINITI voice recognition
system) ..................... .4-114
Voice recognition system ...........4-108
Voice recognition, Alternate command
mode ...................... .4-121
Voice recognition, Standard mode ......4-108
W
Walk-in mechanism ............... .1-6
Warning Dot matrix

display............. .2-18
Hazard warning flasher switch .......2-36
Lights .................... .2-11
Tire pressure monitoring system
(TPMS) .................. .5-3, 6-2
Warning/indicator lights and audible
reminders .................. .2-10
Warning labels, Air bag warning labels . . . .1-53
Warning light Air bag warning light .........1-53, 2-15
All-wheel drive (AWD) warning light . . . .2-11
Anti-lock braking system (ABS) warning
light ..................... .2-11
Brake warning light ............. .2-11
Intelligent Key warning light ........2-13
Low tire pressure warning light .......2-13
Seat belt warning light and chime .....2-14
Warranty, Emission control system
warranty .................... .9-24Washer switch, Windshield wiper and
washer switch
................. .2-29
Washing ..................... .7-2
Waxing ...................... .7-2
Wheel/tire size ................. .9-9
Wheels and tires ................ .8-31
Care of wheels ................ .7-3
Cleaning aluminum alloy wheels .......7-3
Window washer fluid ..............8-14
Window(s) Automatic adjusting function ........2-51
Cleaning ................... .7-3
Power windows .............. .2-48
Windshield wiper and washer switch . . . . .2-29
Wiper Rain-sensing auto wiper system ......2-30
Windshield wiper and washer switch . . .2-29
Wiper blades ................ .8-19
X
Xenon headlights ............... .2-32
10-7