2011 INFINITI G-COUPE mirror

[x] Cancel search: mirror

Page 86 of 468

INFINITI G-COUPE 2011  Owners Manual ZONE VARIATION CHANGE
PROCEDURE
The difference between magnetic north and
geographical north is known as variance. In
some areas, this difference can sometimes be
great enough to cause false compass r

Page 108 of 468

INFINITI G-COUPE 2011  Owners Manual ●Be sure to turn off the rain-sensing auto wiper
system when you use a car wash.
● Using genuine wiper blades is recommended
for proper operation of the rain-sensing auto
wiper system. (See “WIN

Page 131 of 468

INFINITI G-COUPE 2011  Owners Manual DOOR position
When the switch is in the DOOR position2, the
map lights and rear personal lights will illumi-
nate under the following conditions:
● ignition switch is switched to the LOCK
position

Page 132 of 468

INFINITI G-COUPE 2011  Owners Manual The light on the vanity mirror will turn on when
the cover on the vanity mirror is opened.
When the cover is closed, the light will turn off.
The lights will also turn off after 15 minutes when
the li

Page 138 of 468

INFINITI G-COUPE 2011  Owners Manual 3 Pre-driving checks and adjustments
Keys............................................. 3-2
Intelligent Key ................................. 3-2
Valet hand-off .................................. 3-3
D

Page 163 of 468

INFINITI G-COUPE 2011  Owners Manual CAUTION
●Do not store the main sun visor before stor-
ing the extension sun visor.
● Do not pull the extension sun visor forcedly
downward.
1. To block out glare from the front, swing down the mai

Page 164 of 468

INFINITI G-COUPE 2011  Owners Manual Automatic anti-glare type
The inside mirror is designed so that it auto-
matically changes reflection according to the
intensity of the headlights of the following
vehicle.
The anti-glare system will

Page 165 of 468

INFINITI G-COUPE 2011  Owners Manual The outside mirror will operate only when the
ignition switch is in the ACC or ON position.
Turn the switch right or left to select the right or
left side mirror
1, then adjust using the con-
trol sw