2011 HONDA FIT oil additives

Break-in Period
Help assure your vehicle's future
reliability and performance by paying
extra attention to how you drive
during the first 600 miles (1,000 km).
During this period: Avoid full-throttle starts and rapidacceleration.
Avoid hard braking for the first 200
miles (300 km).
Do not change the oil until the
scheduled maintenance time.
You should also follow these
recommendations with an
overhauled or exchanged engine, or
when the brakes are replaced. Fuel Recommendation
Your vehicle is designed to operate
on unleaded gasoline with a pump
octane number of 87 or higher. Use
of a lower octane gasoline can cause
a persistent, heavy metallic rapping
noise that can lead to enginedamage.
We recommend using quality
gasoline containing detergent
additives that help prevent fuel
system and engine deposits: In
addition, in order to maintain good
performance, fuel economy, and
emissions control, we strongly
recommend the use of gasoline that
does NOT contain harmful
manganese-based fuel additives such
as MMT, if such gasoline is available.Use of gasoline with these additives
may adversely affect performance,
and cause the malfunction indicator
lamp on your instrument panel to
come on. If this happens, contact
your authorized dealer for service.
Some gasoline today is blended with
oxygenates such as ethanol. Your
vehicle is designed to operate on
oxygenated gasoline containing up to
10% ethanol by volume. Do not use
gasoline containing methanol. If you
notice any undesirable operating
symptoms, try another service
station or switch to another brand ofgasoline.
Break-in Period, Fuel Recommendation
200
Main MenuTable of Contents

Synthetic Oil
You may use a synthetic motor oil if
it meets the same requirements
given for a conventional motor oil, it
displays the API Certification Seal,
and it is the proper weight. You must
follow the oil and filter change
intervals shown on the informationdisplay.
Engine Oil Additives
Your vehicle does not require any oil
additives. Additives may adversely
affect the engine or transmission
performance and durability.Changing the Engine Oil andFilter
Always change the oil and filter
according to the maintenance
messages shown on the information
display. The oil and filter collect
contaminants that can damage your
engine if they are not removedregularly.
Changing the oil and filter requires
special tools and access from
underneath the vehicle. The vehicle
should be raised on a service station-
type hydraulic lift for this service.
Unless you have the knowledge and
proper equipment, you should have
this maintenance done by a skilledmechanic.
1. Run the engine until it reaches
normal operating temperature,
then shut it off.
2. Open the hood, and remove the engine oil fill cap. Remove the oil
drain bolt and washer from the
bottom of the engine. Drain the oil
into an appropriate container.
WASHER
OIL DRAIN BOLT
Adding Engine Oil, Changing the Engine Oil and Filter
256
Main MenuTable of Contents

Use only Honda ATF DW-1 (automatic
transmission fluid). Do not mix with
other transmission fluids.
Using transmission fluid other than
Honda ATF DW-1 may cause
deterioration in transmission operation
and durability, and could result in
damage to the transmission.
Damage resulting from the use of
transmission fluid other than Honda
ATF DW-1 is not covered by the Honda
new vehicle warranty.
6. Insert the dipstick all the way backinto the transmission securely as
shown in the illustration.
If you are not sure how to add fluid,
contact your dealer. Manual Transmission Fluid
Check the fluid level with the
transmission at normal operating
temperature and the vehicle on levelground.
Remove the transmission filler bolt,
and carefully feel inside the bolt hole
with your finger. The fluid level
should be up to the edge of the bolt
hole. If it is not, add Honda Manual
Transmission Fluid (MTF) until it
starts to run out of the hole.Put a new washer on the filler bolt,
then reinstall the filler bolt and
tighten it securely.
If Honda MTF is not available, you
may use an SAE 10W-30 or 10W-40
viscosity motor oil with the API
Certification seal that says
‘‘FOR
GASOLINE ENGINES ’’as a
temporary replacement. However,
motor oil does not contain the proper
additives, and continued use can
cause stiffer shifting. Replace as soon
as it is convenient.
If you are not sure how to check and
add fluid, contact your dealer.
FILLER BOLT
Correct level WASHER
Transmission Fluid
262
Main MenuTable of Contents

A
Accessories andModifications .......................... 208
ACCESSORY (Ignition Key
Position) ................................... 80
Accessory Power Socket ............106
Additives, Engine Oil .................256
Adjusting the Steering Wheel ......77
Advanced Airbags ........................26
Airbag (SRS) ............................ 9, 22
Air Conditioning System ............110
Usage ...................................... 112
Air Pressure, Tires ..............275, 276
Alcohol in Gasoline ....................200
Antifreeze ................................... 258
Anti-lock Brakes (ABS) Indicator ............................ 62, 233
Operation ................................ 233
Anti-theft, Audio System .............192
Anti-theft Steering Column Lock ......................................... 80
Audio Antenna ........................... 270
Auto Door Locking .......................83
Auto Door Locking/Unlocking ....83 Auto Door Unlocking
...................
86
Automatic Seat Belt Tensioners ...20
Automatic Speed Control ...........195
Automatic Transmission ............221
Capacity, Fluid ........................321
Checking Fluid Level ..............261
Paddle Shifters ........................226
Shifting ................................... 221
Shift Lever Position
Indicators ............................ 221
Shift Lever Positions ...............222
Shift Lock Release ...................225
Automatic Transmission Fluid ...261
Auxiliary Input Jack ...................191
Average Fuel Economy ................70
B
Battery Charging System
Indicator ........................ 60, 305
Jump Starting .......................... 301
Maintenance ........................... 281
Specifications .......................... 322
Before Driving ........................... 199Belts, Seat
................................
8, 18
Beverage Holders ......................106
Booster Seats ............................... 50
Brakes
Anti-lock Brakes (ABS) ...........233
Break-in, New Linings .............200
Bulb Replacement ...................268
Fluid ....................................... 263
Parking ................................... 103
System Design ........................232
System Indicator ...............60, 307
Wear Indicators .......................232
Braking System .......................... 232
Break-in, New Vehicle ................200
Brightness Control,
Instruments .............................. 76
CONTINUED
Index
I
INDEX
Main Menu