2011 HONDA CROSSTOUR key

You can open and close the
moonroof f or up to 10 minutes af ter
you turn of f the ignition switch.
Opening either f ront door cancels
this function.You can use the remote transmitter
or the key to operate the moonroof
f rom the outside. Ref er to page
f or details.
Auto reverse stops sensing when the
moonroof is almost closed. You
should always check that all
passengers and objects are away
f rom the moonroof bef ore closing it. If the moonroof runs into any
obstacle while it is closing
automatically, it will reverse
direction, and then stop. To close the
moonroof , remove the obstacle, then
use the moonroof switch again. 108
Operating the Moonroof with the
Remote Transmitter or the Key
Auto Reverse
Moonroof
Inst rument s and Cont rols
111
If you try to open the moonroof in
below-f reezing temperatures, or when
it is covered with snow or ice, you can
damage the moonroof panel or its
motor.
10/08/27 14:28:42 31TP6610_116
2011 Accord Crosstour

Open the glove box by pulling the
handle to the lef t. Close it with a f irm
push. Lock or unlock the glove box
with the master key.
The glove box light comes on when
the parking lights are on.
The console compartment is
equipped with a detachable tray.
To remove this tray, slide it f orward,
then pull it up. Glove Box
Interior Convenience Items
118
GLOVE BOX
To lock
DETACHABLE TRAY
An open glove box can cause
serious injury to your passenger
inacrash,evenifthe
passenger is wearing the seat
belt.
Always keep the glove box
closed while driving.
10/08/27 14:29:33 31TP6610_123
2011 Accord Crosstour

The ceiling light has a three-position
switch: ON, Door Activated, and
OFF. In the Door Activated (center)
position, the light comes on when
you:After all doors are closed tightly, the
light dims slightly, then f ades out in
about 30 seconds.
The ceiling light (with the switch in
the center position) comes on when
you remove the key f rom the ignition
switch. If you do not open a door, the
light stays on, then f ades out in
about 30 seconds.
Turn on a spotlight by pushing the
lens. Push the lens again to turn it
of f . You can use the spotlights at all
times.
If you leave any door open without
the key in the ignition switch, the
ceiling light will go of f af ter about 15
minutes.
Unlock the driver’s door with the
keyorremotetransmitter. Open any door.
CONT INUED
Ceiling L ight Spotlights
Interior Lights
Inst rument s and Cont rols
123
DOOR ACTIVATED POSITION
DOOR ACTIVATEDOFF POSITION
10/08/27 14:30:16 31TP6610_128
2011 Accord Crosstour

The courtesy light in each f ront door
comes on when the door is opened,
and goes out when the door is closed.
Your vehicle also has a courtesy light
in the ignition switch. This light
comesonwhenyouopenthedriver’s
door. It f ades out in about 30
seconds af ter the door is closed.
The spotlights have a two-position
switch. In the DOOR position, the
lights come on when you open any
door. The lights f ade out about 30
seconds af ter the doors are closed
tightly. In the OFF position, the
lights do not come on.
The spotlights (with the switch in
the DOOR position) also come on
when you unlock the door with the
key or the remote transmitter, and
when you remove the key f rom the
ignition switch.
Your vehicle has a cargo area light
on each side panel in the cargo area.
Each cargo area light has a two
position switch. In the OFF position,
the light does not come on. In the
ON position, the light comes on
when you open the tailgate.Courtesy Lights
Cargo Area Light
Interior Lights
124
ON OFF
Driver’s side is shown.
10/08/27 14:30:23 31TP6610_129
2011 Accord Crosstour

CONT INUED
The security system helps to protect
your vehicle and valuables f rom thef t.
The horn sounds and a combination
of headlights, parking lights, side
marker lights and taillights f lashes if
someone attempts to break into your
vehicle or remove the audio unit.
This alarm continues for two
minutes, then the system resets. To
reset an activated system bef ore the
two minutes have elapsed, unlock
the driver’s door with the key or the
remote transmitter.
The security system automatically
sets 15 seconds after you lock the
doors, hood, and the tailgate. For the
system to activate, you must lock the
doorsandthetailgatefromthe
outside with the key, driver’s lock
tab, door lock master switch, or
remote transmitter. The security
system indicator on the instrument
panel starts blinking immediately to
show you the system is setting itself .The security system will not set if
the hood, tailgate, or any of the
doors are not f ully closed. If the
system will not set, check the doors
and the tailgate. You can also check
the open indicator on the instrument
panel (see page ), to see if the
doors and the tailgate are f ully
closed. Since it is not part of the
monitor display, manually check the
hood.
Once the security system is set,
opening any door, the tailgate, or the
hood without using the key or the
remote transmitter, will cause the
alarm to activate. It will also activate
if the audio unit is removed f rom the
dashboard or the wiring is cut. 60
Security System
Features
243
SECURITY SYSTEM INDICATOR
10/08/27 14:46:01 31TP6610_248
2011 Accord Crosstour

Î
Î
CONT INUED
BluetoothHandsFreeL ink
Features
261
‘‘Change Language’’‘‘Hands Free Help’’
‘‘System
Set up’’
‘‘Tutorial’’ ‘‘Clear’’
‘‘Auto Transfer’’ ‘‘Call Notification’’ ‘‘Security’’
‘‘Change Passcode’’
Press HFL
Talk button
Press and release the HFL Talk button each time you give a command.
: Canadian models (See page
277)
Apply a security passcode to the system that must be input at each key
cycle to access the system
(See page278)
Change your security passcode
(See page 278)
Set how you would like to be notified of an incoming call
(See page279)
Change language from English to French
(See page258)
Hear a tutorial for general rules on using the system
Hear a list of available commands and additional information describing each command
(See page
258) (See page
279)
Clear the system of all paired phones, phonebook entries and security
passcode (See page
278)
Set calls to automatically transfer from your phone to HFL when you
enter the vehicle
10/08/27 14:48:20 31TP6610_266
2011 Accord Crosstour

CONT INUED
Bluetooth is the wireless technology
that links your phone to HFL. HFL
uses a Class 2 Bluetooth, which
means the maximum range between
yourphoneandvehicleis30feet(10
meters).
During a call, HFL allows you to talk
up to 30 minutes af ter you remove
the key from the ignition switch.
However, this may weaken the
vehicle’s battery. You can make calls using a name in
the HFL phonebook or any phone
number. You can also redial the last
number called.Once connected, you will hear the
person you called through the audio
speakers.
Follow the HFL prompts to
conf irm the name and make the
call.
Follow the HFL prompts to
conf irm the number and say
‘‘ ’’ or ‘‘ .’’
Follow the HFL prompts and say
thenamestoredintheHFL
phonebook that you want to call.
Follow the HFL prompts and say
the phone number you want to dial. Say ‘‘ ’’ or ‘‘ .’’
Say ‘‘ ’’ or ‘‘ .’’
Press and release the HFL Talk
button bef ore a command.
Press and release the HFL Talk
button bef ore a command.
1.
2.
3.
1.
2.
3.
BluetoothHandsFreeL ink
Making a Call
Call DialCall Dial
Call DialTomakeacallusinganameinthe
HFL phonebook: T o make a call using a phone
number:
Features
265
10/08/27 14:49:06 31TP6610_270
2011 Accord Crosstour

Select the name. All the phone
numbers stored f or that name will
be listed.
To search f or a specif ic name in the
phonebook, enter the keyword f or
either the f irst or last name.
To display all names in the
phonebook, select the ‘‘ ’’ option.
Select the phone number and push
the interf ace selector, HFL begins
dialing.If you choose ‘‘
,’’ the phone
number will be stored in HFL, so
that you can call it using HFL’s name
tag by voice.
4.
5.
List Store in
HandsFreeL ink
BluetoothHandsFreeL ink
Features
267
Push up the interface selector to
show a list.
10/08/27 14:49:23 31TP6610_272
2011 Accord Crosstour