2011 HONDA CR-V engine

[x] Cancel search: engine

Page 305 of 445

HONDA CR-V 2011 RD1-RD5, RE7 / 3.G Owners Manual µµµ µ
µ
µ
Aggressive driving (hard 
acceleration and braking)
Excessive idling, accelerating and
braking in stop-and-go traf f ic
Cold engine operation (engines
aremoreefficientwhenwarmedu

Page 306 of 445

HONDA CR-V 2011 RD1-RD5, RE7 / 3.G Owners Manual µµ
Fill the f uel tank until the nozzle automatically clicks of f . 
Reset trip counter to zero.
Record the total gallons (liters) needed to ref ill.
Follow one of the simple calculations above.
T

Page 316 of 445

HONDA CR-V 2011 RD1-RD5, RE7 / 3.G Owners Manual This section gives you tips on 
starting the engine under various
conditions, and how to operate the
automatic transmission. It also
includes important inf ormation on
parking your vehicle, the brakin

Page 318 of 445

HONDA CR-V 2011 RD1-RD5, RE7 / 3.G Owners Manual Check the adjustment of the 
inside and outside mirrors (see
page ). 
Check the steering wheel 
adjustment (see page ). 
Fasten your seat belt. Check that 
your passengers have f astened
their seat be

Page 319 of 445

HONDA CR-V 2011 RD1-RD5, RE7 / 3.G Owners Manual Apply the parking brake. 
In cold weather, turn of f all 
electrical accessories to reduce
the drain on the battery.Without touching the accelerator
pedal, turn the ignition key to the
START (III) pos

Page 321 of 445

HONDA CR-V 2011 RD1-RD5, RE7 / 3.G Owners Manual µµ
If you have done all of the above and 
still cannot move the lever out of
Park, see on
page . This position mechani-
cally locks the transmission. Use
Park whenever you are turning of f or
star

Page 322 of 445

HONDA CR-V 2011 RD1-RD5, RE7 / 3.G Owners Manual µ
µ Use neutral if you
need to restart a stalled engine, or if 
it is necessary to stop brief ly with
the engine idling. Shif t to the Park
position if you need to leave your
vehicle for any reaso

Page 323 of 445

HONDA CR-V 2011 RD1-RD5, RE7 / 3.G Owners Manual µµ
Turning the ignition switch to the 
LOCK (0) position turns this mode
of f . When you restart the engine,
select the D position and press the
D3 mode switch again to use this
mode. 
TheD3modein