I P O D®O R U S B F L A S H M E M O R Y
Play audio files from your compatible iPod or USB flash memory device through your
vehicle’s audio system.
Connecting Devices and Playing Audio Files
1.Open the center console\b and pull
out the USB adapter cable.
3.Press CD/AUX or AUX to begin
playing.
2. Connect the USB connector to your
iPod dock connector or flash drive.
4. Press the SKIP buttons to change
tracks.
1011
H O M E L I N K®( i f e q u i p p e d )
The HomeLink Universal Transceiver can be programmed to operate up to three
remote controlled devices around your home\b such as garage doors\b lighting\b or home
security systems.
Press and hold thebutton on the
remote and the HomeLin kbutton at
the same time. Th en, while
continuing to hold the HomeLink
button, press and release thebutton
on the remote every 2seconds.
Does the LED blink at a faster rate within 20
seconds?
Press and hold
the HomeLink
button again. Training
complete
YES
NO
HomeLink indicator
flashes for 2 seconds,
then remains on. HomeLink LED
remains on.YES
NO YES
NO
Position the remote transmitter you
wish to link 1–3 inches from the
HomeLink button you want to program.1
Press and hold the desired
HomeLink button and the button on
the remote transmitter.
Does the HomeLink indicator (LED) blink at a
faster rate after about 10 seconds?
2
a
The remote has a rolling code.
Press the “learn” button on the
remote-controlled device (e.g.,
garage door opener).
Press the programmed HomeLink
button again; the remote-controlled
device should operate. Within 30 seconds, pressand
hold the programmed HomeLink
button for 2 seconds.a
Press and hold theprogrammed
HomeLink button for about a
second.
Does the device (garage door opener) work?
3
b
4
5
Training a Button
If you have any problems programming HomeLink\b see the owner’s manual included
with the device you are trying to program\b call HomeLink at (8\f\f) 355 3515\b or
visit www.homelink.com .
iPod is a registered trademark of Apple Computer, Inc ., registered in the U.S. and other countries. iPod not included. model with
navigation shown
11 Accord 2D TRG\fATG_NEW STYLE 8/3/2010 10\f51 AM Page 7
V O I C E R E C O G N I T I O N ( i f e q u i p p e d )To keep your eyes on the road and hands on the wheel\b use voice commands for
hands free calling\b navigation\b audio\b and climate control. For a full list of commands\b say
“Information ” and “Voice Command Help. ”
Key Fu nctio ns by Voic e Com man d
B LU ETO OTH®H AN DSFR EE LIN K®p. 2\f
A U D I Op.17
C L I M A T Ep.17
N A V I G A T I O Np.18
Control four different systems with the steering wheel buttons and the ceiling
microphone.
Voice Command Tips
Press and release the HFL or Navi Talk button\b wait for a beep\b then give a
command.
For a list of available HFL commands\b
press and releasethe HFL Talk button
and say“Hands free help.”
For a list of available navigation commands\b press and releasethe Navi Talk
button and say“Help.”
Speak in a clear\b natural voice.
Reduce all background noise.
Adjust the dashboard and side vents away from the microphone in the ceiling.
Close the windows.
HFL Talk button\b Give HFL commands or
answer incoming calls.
Navi Talk button\b Give navigation\b audio\b
and climate control commands.
Navi Back button\b Cancel a command or
return to the previous screen.
HFL Back button\b End a call\b go back to
the previous command\b or cancel an
operation.
1213
11 Accord 2D TRG\fATG_NEW STYLE 8/3/2010 10\f51 AM Page 8
