2011 HONDA ACCORD COUPE display

[x] Cancel search: display

Page 132 of 454

HONDA ACCORD COUPE 2011 8.G Owners Manual The automatic climate control
system in your vehicle maintains the
interior temperature you select. The
system also adjusts the f an speed
and airf low levels.Press the Auto button. The
indicator in t

Page 134 of 454

HONDA ACCORD COUPE 2011 8.G Owners Manual ÛÝ When the indicator in the button is
on, air f rom the vehicle’s interior is
sent through the system again.
When the indicator is off, air is
brought in f rom the outside of the
vehicle (fresh

Page 137 of 454

HONDA ACCORD COUPE 2011 8.G Owners Manual The selected temperatures appear in
the display (in the center display on
models with navigation system).
When the indicator in the SYNC
button is on, you can adjust both
sides to the same temperature

Page 141 of 454

HONDA ACCORD COUPE 2011 8.G Owners Manual µ
µ µ
The ignition switch must be in the
ACCESSORY (I) or ON (II) position.
Turn the system on by pushing the
power/volume knob or the AM or
FM button. Adjust the volume by
turning the power/vol

Page 142 of 454

HONDA ACCORD COUPE 2011 8.G Owners Manual µµ µ
If you do not like the stations auto
select has stored, you can store
other f requencies on the preset
buttons as previously described.
Each preset button can
store one f requency on AM and

Page 143 of 454

HONDA ACCORD COUPE 2011 8.G Owners Manual On the FM band, you can select a
favorite station and display the
program service name provided by
the radio data system (RDS).
The RDS inf ormation display
f unction shows the name of the RDS
station

Page 144 of 454

HONDA ACCORD COUPE 2011 8.G Owners Manual ÛÝ
On the FM band selected, you can
select the program category
provided by the RDS. Press either
side of the FOLDER bar ( or )
to display and select an RDS
category. The principal RDS
categories

Page 145 of 454

HONDA ACCORD COUPE 2011 8.G Owners Manual The scan f unction samples all
stations with strong signals on the
selected RDS category. To activate it,
press and release the SCAN button.
You will see SCAN in the display.
The system will scan f or
Page:   < prev 1-8 9-16 17-24 25-32 33-40 41-48 ... 136 next >