XXX mls — Trip odometer:Registers the mileage of individual
journeys.
XXX mls — Distance to empty:
Indicates the approximate
distance the vehicle will travel on the fuel remaining in the tank.
Changes in driving pattern may cause the value to vary.
XXX mpg ( l/100km)—Average fuel consumption:
Indicates the
average fuel consumption since the function was last reset.
XX mph (km/h)—Average speed:Indicates the average speed
calculated since the function was last reset.
XXX °F (°C)—Outside air temperature:Shows the outside air
temperature.
To reset the trip odometer and average speed, scroll to the required
display and press and hold the end of the multifunction lever.
MULTIFUNCTION DISPLAY
Your vehicle’s multifunction display is capable of monitoring many vehicle
systems and will alert you to potential vehicle problems and various
conditions with an informational message. You can also program various
vehicle settings using the message center.
The display is located in the center stack.
Certain settings can be changed
through the multifunction display.
Press MENU on the audio system to
access the settings screen.
Press
///to move
through the display screen. The
following settings can be changed:
•Audio:SeeAudio systemsin theEntertainment Systemschapter for
more information.
•Vehicle:Select Vehicle then move right to enter into the menu. Scroll
up or down to select from:
•Lane change indicator:Move right to enter the menu and then
move up or down to select from flash once or flash three times.
Press OK to confirm.
•Chimes:Move right to enter the menu, then up or down to select
from warning chimes or info chimes. Press OK to confirm.
Instrument Cluster
18
2011 Fiesta(fie)
Owners Guide, 1st Printing
USA(fus)
