2011 FORD ESCAPE engine

[x] Cancel search: engine

Page 304 of 367

FORD ESCAPE 2011 2.G Owners Manual When fail-safe mode is activated
You have limited engine power when in the fail-safe mode, so drive the
vehicle with caution. The vehicle will not be able to maintain high-speed
operation and the engi

Page 306 of 367

FORD ESCAPE 2011 2.G Owners Manual sensitive individuals, serious personal injury or sickness may result. If
fuel is splashed on the skin, promptly wash skin thoroughly with soap
and water. Consult a physician immediately if you experi

Page 307 of 367

FORD ESCAPE 2011 2.G Owners Manual WARNING:The flow of fuel through a fuel pump nozzle can
produce static electricity, which can cause a fire if fuel is
pumped into an ungrounded fuel container.
Refueling
WARNING:Fuel vapor burns viole

Page 308 of 367

FORD ESCAPE 2011 2.G Owners Manual 3. Slowly insert the fuel filler nozzle fully into the fuel system, and leave
the nozzle fully inserted until you are done pumping. Pump fuel as
normal.
4. After you are done pumping fuel, slowly remo

Page 310 of 367

FORD ESCAPE 2011 2.G Owners Manual Do not be concerned if your engine
sometimes knocks lightly. However,
if it knocks heavily under most
driving conditions while you are
using fuel with the recommended
octane rating, see your authorize

Page 311 of 367

FORD ESCAPE 2011 2.G Owners Manual rating. These products have not been approved for your engine and
could cause damage to the fuel system. Repairs to correct the effects of
using an aftermarket product in your fuel may not be covered

Page 313 of 367

FORD ESCAPE 2011 2.G Owners Manual NOT accurate as a measure of fuel economy. We do not recommend
taking fuel economy measurements during the first 1,000 miles
(1,600 km) of driving (engine break-in period). You will get a more
accurat

Page 314 of 367

FORD ESCAPE 2011 2.G Owners Manual 4. Subtract your initial odometer reading from the current odometer
reading.
5. Follow one of the simple calculations in order to determine fuel
economy:
Calculation 1:Divide total miles traveled by t