2011 FORD EDGE warning

[x] Cancel search: warning

Page 347 of 403

FORD EDGE 2011 1.G Owners Manual 4. After you are done pumping fuel, wait about five seconds before
slowly removing the fuel filler nozzle. This allows residual fuel to drain
back into the fuel tank and not spill onto the vehicle.
No

Page 349 of 403

FORD EDGE 2011 1.G Owners Manual performance and emission control system protection for your vehicle.
Gasolines that meet the World-Wide Fuel Charter should be used when
available. Ask your fuel supplier about gasolines that meet the

Page 354 of 403

FORD EDGE 2011 1.G Owners Manual The scheduled maintenance items listed inscheduled maintenance
informationare essential to the life and performance of your vehicle
and to its emissions system.
If other than Ford, Motorcraftor Ford-

Page 357 of 403

FORD EDGE 2011 1.G Owners Manual BRAKE FLUID
The fluid level will drop slowly as
the brakes wear, and will rise when
the brake components are replaced.
Fluid levels between the MIN and
MAX lines are within the normal
operating range;

Page 359 of 403

FORD EDGE 2011 1.G Owners Manual Use of a non-approved automatic transmission fluid may cause
internal transmission component damage.
If necessary, add fluid in 1/2 pint
(250 ml) increments through the
filler tube until the level is

Page 380 of 403

FORD EDGE 2011 1.G Owners Manual Any adverse condition should be brought to the attention of your dealer
or qualified service technician as soon as possible for the proper service
advice. The owner maintenance service checks are gene

Page 381 of 403

FORD EDGE 2011 1.G Owners Manual Be sure to ask your Ford or Lincoln Mercury dealership service advisor
or technician about the multi-point vehicle inspection. It’s a
comprehensive way to perform a thorough inspection of your vehic

Page 397 of 403

FORD EDGE 2011 1.G Owners Manual A
Accessory delay ..........................93
Adaptive Cruise Control .............97
AdvanceTrac ..............................252
Air cleaner filter ...............359, 363
Air conditioning .......