2011 DODGE JOURNEY window

[x] Cancel search: window

Page 126 of 557

DODGE JOURNEY 2011 1.G Owners Manual •low road noise,
•smooth road surface,
•fully closed windows,
•dry weather condition.
•Even though the system is designed for users speaking
in North American English, French, and Spanish ac

Page 153 of 557

DODGE JOURNEY 2011 1.G Owners Manual Things You Should Know About Your Uconnect™
Phone
Voice Command
•
For best performance, adjust the rearview mirror to
provide at least1�2in (1 cm) gap between the overhead
console (if equipped) an

Page 154 of 557

DODGE JOURNEY 2011 1.G Owners Manual •Even though international dialing for most number
combinations is supported, some shortcut dialing
number combinations may not be supported.
•In a convertible vehicle, system performance may be
c

Page 200 of 557

DODGE JOURNEY 2011 1.G Owners Manual Map/Reading Lights
These lights are mounted between the sun visors on the
overhead console. Refer to “Overhead Console” in “Un-
derstanding The Features Of Your Vehicle” for further
informatio

Page 231 of 557

DODGE JOURNEY 2011 1.G Owners Manual NOTE:If three consecutive sunroof close attempts re-
sult in Pinch Protect reversals, the fourth close attempt
will be a Manual Close movement with Pinch Protect
disabled.
Pinch Protect Override
If a

Page 252 of 557

DODGE JOURNEY 2011 1.G Owners Manual Grab the cover handle and pull it toward you. As the
cover nears the liftgate opening, guide the rear attach-
ment posts (on both ends of the cover) into the notches in
the trim panels. Lower the cove

Page 254 of 557

DODGE JOURNEY 2011 1.G Owners Manual to the “Park” position. When the vehicle is restarted, the
wiper will resume function at whichever position the
switch is set at.
CAUTION!
•Turn the rear wiper off when driving through an
automa

Page 255 of 557

DODGE JOURNEY 2011 1.G Owners Manual CAUTION!
Failure to follow these cautions can cause damage to
the heating elements:
•Use care when washing the inside of the rear
window. Do not use abrasive window cleaners on
the interior surface