163
7
QUICK HELP
Levels
Engine coolant level
Only use the fluid recommended by the
manufacturer. Otherwise, you risk seriously
damaging your engine. When the engine
is warm, the temperature of the coolant is
controlled by the engine cooling fan.
As this fan can operate with the ignition key
removed and because the cooling system is
pressurised, wait for at least one hour after
the engine has stopped before carrying out
any work.
Topping up
The level must be between the MIN
and
MAX
marks on the header tank. If more than
1 litre of fluid is required to top up the level,
have the system checked by a CITROËN
dealer or a qualified workshop.
Power steering fluid level
The vehicle must be parked on level ground
with the engine cold. Unscrew the cap with
integral gauge and check the level which
must be between the MIN
and MAX
marks.
Screenwash fluid level
For optimum cleaning and to avoid freezing,
topping up or replacement of this fluid
should never be with plain water; we
recommend the use of products available
from CITROËN dealers.
Capacity of the reservoir: approximately
5.5 litres. Slacken the cap by two turns to release the
pressure to prevent any risk of scalding.
When the pressure has dropped, remove the
cap and top up the level with coolant.
If fluid has to be added frequently, this
indicates a fault which must be checked by a
CITROËN dealer or a qualified workshop as
soon as possible.
Used products
Avoid prolonged contact of used oil with
the skin.
Brake fluid is harmful to health and very
corrosive.
Do not dispose of used oil, brake fluid
or coolant into drains or into the ground,
but into the containers provided for this
purpose at CITROËN dealers (France) or
at an authorised waste disposal site.
174
Technical data - Maintenance
Screenwash ................................... 163
Bulbs, lighting,
changing bulbs ....................143-147
Opening the bonnet ....................... 159
Under the bonnet ....................160-161
Identifi cation markings,
serial number,
paint, tyres .................................. 155
Changing a wiper blade ................. 148
Engine technical data .................64-65
Dimensions .......... 58-59, 60-61, 62-63
Weights ............................................ 66
TECHNICAL DATA - MAINTENANCE
Levels .....................................162-163
●
dipstick,
●
power steering fluid,
●
brake fluid,
●
coolant,
●
screenwash.
Checks....................................164-165
●
battery,
●
air/passenger compartment filter,
●
oil filter,
●
particle emissions fi lter (1.3 HDi 75),
●
parking brake,
●
brake pads.
Emission control ..................... 29, 165
Engine fuses ...................149, 152-153
