Page 17 of 352
Downloaded from www.Manualslib.com manuals search engine 15
FAMILIARISATION
Front seats
Head restraint
Backrest angle
Seat height adjustment
Lumbar support
Forwards-backwards
adjustment
Armrest
Electric adjustments
Manual adjustments
68
Heated seat control
(lo-
cated on the inside of the
front seats)
67
1.
Adjustment of seat height, angle
and forwards-backwards position
2.
Adjustment of backrest angle and
lumbar support
3.
Driver: storing driving positions
The seats can also be adjusted on a
temporary basis:
- on opening one of the front doors,
- after switching on the ignition.
SITTING COMFORTABLY
Page 18 of 352
Downloaded from www.Manualslib.com manuals search engine 16
FAMILIARISATION
Adjusting the seat belt height
To adjust the seat belt, squeeze the
control and slide it in the direction re-
quired.
131
From the driver’s seat position, the con-
trols located on the door are used to op-
erate the electric windows.
86
)
Slide the blind on the visor to the
desired position by pushing at A
.
The blinds are extended on the sun
visor rails.
)
Fold the visor downwards, to pre-
vent being dazzled.
Panoramic sunroof blind
Opening (positions 1
to 9
)
Closing (position 0
)
The blind has an anti-pinch system.
91
SITTING COMFORTABLY
Electric windows controls
Sliding sun visors
105
Page 19 of 352
Downloaded from www.Manualslib.com manuals search engine 17
FAMILIARISATION
Recommended settings
- Heating/manual air conditioning:
- Digital air conditioning:
the fully automatic mode is recommended - press "AUTO"
.
Operate
For...
Cooling
or
Fully cold to
start, then
personal
settings
Maximum to
start, then
personal
settings
ON
ON when
starting, then
OFF
Heating
or
Fully hot to
start, then
personal
settings
Maximum to
start, then
personal
setting
ON when
starting, then
OFF
Demisting
Defrosting
Fully hot
OFF
VENTILATION
Page 20 of 352
Downloaded from www.Manualslib.com manuals search engine 18
FAMILIARISATION
Seat belts not fastened/
unfastened warning lamp
This warning lamp informs you if
the driver’s or front passenger’s
seat belt is not fastened (de-
pending on model), and if the
front passenger’s (depending
on model) or the second-row
passengers’ seat belts are unfastened.
The illuminated positions represent
those whose seat belts are not fas-
tened/unfastened.
Once the function has been activated,
when starting the engine, the system
automatically locks the doors once you
reach approximately 6 mph (10 km/h).
This function can be deactivated by
pressing button A
for more than two
seconds.
Tyre under-inflation detection
This function warns you if a tyre is de-
fl ated or punctured.
This system does not absolve the driver
of the need to regularly check the tyre
pressures.
The service warning lamp
comes on, and a vehicle outline
is displayed, accompanied by a
message and an audible signal.
Under-infl ation warning
The STOP
warning lamp comes
on, and a vehicle outline is dis-
played, accompanied by a mes-
sage and an audible signal.
Puncture
41
127
89
MONITORING
Automatic central locking
Instrument panel
with multifunction screen A or C
with the MyWay or NaviDrive
multifunction screen
1.
Instrument panel.
2.
Multifunction screen.
3.
Control buttons.
4.
Warning lamps display zone.
31
32
Manual central locking
You can use electrical central locking or
unlocking by pressing on button A
.
If one of the doors is open or is not
closed properly, central locking will not
work.
Page 21 of 352
Downloaded from www.Manualslib.com manuals search engine 19
FAMILIARISATION
Deactivation of front passenger
airbag
Child lock
The 3 second-row seats of your vehicle
are fi tted with regulation ISOFIX mount-
ing points, with 3 rings for each seat po-
sition A B C.
This fi xing system is designed for chil-
dren weighing up to 18 kg.
Electric control
135
125
122
Front airbags
Manual control
PASSENGER SAFETY
1.
Insert the key in lock A
.
2.
Select the "OFF"
position.
3.
Remove the key. The rear doors are locked by operating
the lever using the key (aperture at an
angle).
Pressing the button prohibits operation
of the electric windows from the rear
of the vehicle and opening of the rear
doors from inside.
ISOFIX mounting system
Page 22 of 352
Downloaded from www.Manualslib.com manuals search engine 20
FAMILIARISATION
Take care to attach the third-row pas-
senger seat belts to the rings provided
for this purpose.
Do not attach the belts to the load
anchorage points marked with a red
cross (see illustration above).
Stowing the tongue of the third-row
seat belt
133
Using the third-row passenger seat
belts (CITROËN Grand C4 Picasso)
PASSENGER SAFETY
)
Insert tongue C
into the buckle on
the right, then insert the second
tongue D
into the buckle on the left.
132
Seat belts
Second row centre seat belt
Page 23 of 352
Downloaded from www.Manualslib.com manuals search engine 21
FAMILIARISATION
SECOND ROW SEATS
The 3 second-row seats are indepen-
dent of each other and are all the same
width. They can all be adjusted to the
"comfort" position.
Placing a seat in the "comfort"
position
Returning the seat to its original position
70
Longitudinal adjustment
Lift up control A
, located at the front of
the seat, and adjust the seat into the
desired position.
INTERIOR
"Comfort" position
)
Pull on strap B.
The backrest reclines and the seat base
pivots slightly.
)
Pull on strap B
and guide the seat
forwards.
Page 24 of 352
Downloaded from www.Manualslib.com manuals search engine 22
FAMILIARISATION
INTERIOR
Folding the seats
From the boot - whilst loading,
for example (CITROËN Grand
C4 Picasso)
SECOND ROW SEATS
From outside
)
Pull fi rmly upwards on strap C
, as
indicated by the red arrow, to unlock
the seat; keep pulling until the seat
is fully folded.
)
Slide latch A
of the panel down-
wards, to unlock it.
)
Return the panel to the upright posi-
tion, then slide latch A
upwards to
lock it.
Before deploying the rigid panels, check
that the second row seats are in their
fully rear position.
72
Having fi rstly folded the third-row
seats.
)
Pull on strap D
to unlock the re-
quired seat.
Repositioning the seats
Return the rigid panels of the second-
row seats to their initial (upright) position
and lock them in position (CITROËN
Grand C4 Picasso).
Raise the backrest and push it back-
wards until it locks in position.
Rigid panel (CITROËN Grand
C4 Picasso)
A rigid panel is attached to each sec-
ond-row seat backrest.
Unlocking/Locking the rigid panel
