113
4
Driving
 This gearbox has two driving modes: 
   
 
-  an automated mode for automatic control
of the gears by the gearbox and therefore
without any action on the par t of the driver, 
   
-   a manual mode for sequential changing of 
the gears by the driver using the steeringmounted controls or the gear lever.
   
 
 
 
 
CVT gearbox 
It includes the following controls: 
-   a gear lever  1 
 on the centre console for selecting the driving mode, reverse gear 
and neutral or for changing gear in manual
mode,    
-  
a  "-" 
 steering mounted control paddle  2 
 for manual downward gear changes, 
   
-  a  "+/OFF"steering mounted control paddle 3for manual upward gear changes.  
     
The six-speed automatic 
gearbox offers a choice between the comfor t of automatic regulation or the pleasure of manual gear changing. 
 
 
The mode can be changed at any time. 
         
        
        116
Driving
Manual gear changing 
In the automated mode, you can take over 
control temporarily at any time using thesteering mounted controls. 
The use of these controls permits manualselection of the gears in situations whichrequire a faster change down than that offered
in automated mode (arrival at a roundabout, exit from a car park with a steep gradient,
over taking...).
The gearbox engages the gear requested if 
the engine speed permits it. The gear engaged appears.
To return to the automated mode, do one of thefollowing:
-   press the back of the  "+/OFF"steering mounted control 3for approximately2 seconds, 
-  move the gear lever quickly towardsposition +/- 
 and then return it to position D , 
-  stop the vehicle.
 
 
Stopping the vehicle    
Operating fault
 
With the ignition on, if the message "Slow
down" 
 or  "Service required" 
 appears in 
the instrument panel screen, this indicates a 
gearbox malfunction.
 When a message is displayed, carry out thefollowing operations: 
   
 
-   slow down and stop your vehicle in a safe place, 
   
-   place the lever in position  P 
 and let the engine run,
   
-   open the bonnet to allow the engine to cool.  
  If the message disappears for a long period, you can set off again.
  If the message remains displayed or appears 
frequently, contact a CITROËN dealer or aqualified workshop without delay.   Before switchin
g off the engine, you must place
the gear lever in position P.P You must apply the parking brake to immobilise
the vehicle.