
Adjustments
48
Seat and mirror memory*
You can store and call up two different combi-
nations of driver's seat and exterior mirror 
positions.
Settings for the backrest width and lumbar 
support are not stored in memory.
Storing
1.Switch on radio readiness or the ignition, 
refer to page55.
2.Adjust the seat and exterior mirrors to the 
desired positions.
3.Press the  button.
The LED in the button lights up.
4.Press the desired memory button 1 or 2: 
the LED goes out.
The driver's seat and exterior mirror posi-
tions are stored for the remote control cur-
rently in use.
Call-up
Do not call up the memory while you are 
driving; otherwise, unexpected seat 
movement could result in an accident.<
Comfort function
1.Unlock and open the driver's door or switch 
on radio readiness, refer to page55.
2.Briefly press the desired memory button1 
or 2.
The adjusting procedure is halted immediately 
when you touch a seat adjustment switch or 
one of the memory buttons.
Safety feature
1.Close the driver's door and switch the igni-
tion on or off, refer to page55.
2.Press the desired memory button1 or2 
and keep it pressed until the adjustment 
process has been completed.
If the  button was pressed accidentally:
Press the button again; the LED goes out.
Call-up with the remote control
The driver's seat position last set is stored for 
the remote control currently in use.
You can select whether or not the seat is reset 
to that position automatically.
When this Personal Profile function is 
used, first make sure that the footwell 
behind the driver's seat is free of obstacles. 
Failure to do so could cause injury to persons or 
damage to objects as a result of a rearward 
movement of the seat.<
The adjusting procedure is halted immediately 
when you touch a seat adjustment switch or 
one of the memory buttons.
Selecting automatic call-up
1."Settings"
2."Door locks"
3."Last seat position auto."
 The function for automatically calling up 
the last seat position is switched on and is 
stored for the remote control currently in use.
Switching off automatic call-up
Deactivate "Last seat position automatic". 

Controls
 49Reference
At a glance
Driving tips
Communications
Navigation
Entertainment
Mobility
Safety belts
Observe the adjustment instructions on 
page43 to ensure the best possible per-
sonal protection.<
Before every drive, make sure that all occupants 
wear their safety belts. Airbags complement the 
safety belt as an additional safety device, but 
they do not represent a substitute.
Closing
Make sure you hear the latch plate engage in 
the belt buckle.
The upper belt anchor is suitable for adults of 
any stature as long as the seat is adjusted prop-
erly, refer to page43.
Opening
1.Grasp the belt firmly.
2.Press the red button in the buckle.
3.Guide the belt into its reel.
"Fasten safety belts" reminder for 
driver's and front passenger seat
The indicator lamps light up and an 
acoustic signal sounds. In addition, 
a message appears on the Control 
Display. Check whether the safety 
belt has been fastened correctly.
The "Fasten safety belts" reminder is issued as 
long as the driver's safety belt has not been fas-
tened. The "Fasten safety belts" reminder is 
also activated at road speeds above approx. 
5 mph or 8 km/h if the front passenger safety 
belt is not fastened, if objects are placed on the 
front passenger seat, or if driver or front pas-
senger unfasten their safety belts.
Damage to safety belts
If the safety belts are damaged or 
stressed in an accident: have the belt sys-
tem, including any belt tensioners or child 
restraint systems, replaced and the belt 
anchors checked. Have this work done only by 
your BMW center or at a workshop that works 
according to BMW repair procedures with cor-
respondingly trained personnel. Otherwise, it is 
not guaranteed that the safety devices will func-
tion properly.<
Coupe: belt hand-over
The concept
The belt hand-over makes it easier for you to 
fasten your safety belt. When you close the 
door and switch on radio readiness or the igni-
tion, the belt hand-over extends automatically 
and presents the in a position that is convenient 
for fastening it around you. After you have fas-
tened your safety belt, the belt hand-over 
retracts to its original position.
Even if you have not yet fastened your safety 
belt, the belt hand-over will retract if you:
>Wait for more than approx. one minute
>Open the corresponding door
>Start driving.
Closing the respective door reactivates the belt 
hand-over if the ignition or radio readiness is on.
Front passenger seat
The belt hand-over will extend only if the seat is 
occupied and after the front passenger door is 
closed. 

Technology for driving comfort and safety
98
Airbags
The following airbags are located under the 
marked covers:
1Front airbags
2Coupe: head airbags
3Side airbags in the seat backrests
4Convertible: knee airbags
Protective action
Observe the adjustment instructions on 
page42 to ensure the best possible per-
sonal protection.<
The front airbags help protect the driver and 
front passenger by responding to frontal 
impacts in which safety belts alone cannot pro-
vide adequate restraint. When needed, the 
head and side airbags help provide protection in 
the event of side impact. The relevant side air-
bag supports the side upper body area. The 
head air bag supports the head.
The airbags have been designed to not be trig-
gered in every collision situation, e.g. not in 
minor accidents or rear-end collisions.
Do not apply adhesive materials to the 
cover panels of the airbags, cover them or 
modify them in any other way.
Keep the dashboard and windows on the front 
passenger side clear, i.e. do not cover with 
adhesive labels or coverings, and do not attach 
holders such as for navigation instruments or 
mobile phones.
Do not attach seat covers, cushions or other 
objects not specifically approved for seats with 
integral side airbags to the front seats. Do not 
hang items of clothing such as coats or jackets over the backrests. Do not attempt to remove 
the airbag retention system from the vehicle. 
Do not modify the individual components of the 
system or its wiring in any way. This includes 
the upholstered covers on the steering wheel, 
instrument panel, seats and roof posts, as well 
as the sides of the roof lining. Do not attempt 
to remove or dismantle the steering wheel.
Do not touch the individual components imme-
diately after the system has been triggered, 
because there is a danger of burns.
In the event of malfunctions, deactivation or 
triggering of the airbag restraint system, have 
the testing, repair, removal and disposal of air-
bag generators executed only by a BMW center 
or a workshop that works according to repair 
procedures of BMW with correspondingly 
trained personnel and that has the required 
explosives licenses. Unprofessional attempts 
to work on the system could lead to failure in an 
emergency or to undesired airbag activation, 
either of which could result in personal injury.<
Warning notices and information about the air-
bags can also be found on the sun visors.
Automatic deactivation of the front 
passenger airbags
An analysis of the impression in the front pas-
senger seat cushion determines whether and 
how the seat is occupied. The front and side air-
bags for the front passenger are activated or 
deactivated by the system accordingly.
The indicator lamp above the interior 
rearview mirror shows the current status 
of the front passenger airbags, deactivated or  

Everything from A to Z
262 Directory for navigation, refer 
to Address book137
Displacement, refer to Engine 
data246
Display, refer to iDrive 
controls16
Display lighting, refer to 
Instrument lighting105
Displays
– on the Control Display16
Displays, refer to Instrument 
cluster12
Displays and controls10
Disposal
– coolant226
– remote control battery35
– vehicle battery237
Distance remaining to service, 
refer to Service 
requirements80
Distance warning, refer to 
Park Distance Control 
PDC88
Door key, refer to Remote 
control with integrated 
key26
Door lock29
Doors, emergency 
operation30
DOT Quality Grades218
Draft-free ventilation109
Drinks holders, refer to 
Cupholders116
Drive mode61
Drive-off assistance, refer to 
Dynamic Stability Control 
DSC89
Drive-off assistant92
Driving dynamics control62
Driving lamps, refer to Parking 
lamps/low beams101
Driving notes126
Driving off on hills, refer to 
Drive-off assistant92
Driving stability control 
systems89
Driving through water128
Driving tips, refer to Driving 
notes126Dry air, refer to Cooling 
function108
DSC Dynamic Stability 
Control89
DTC Dynamic Traction 
Control90
– indicator/warning lamp90
DVD
– country codes167
– settings168
– video playback167
DVD menu168
DVD player, refer to CD 
player165
DVD video167
Dynamic Brake Control 
DBC89
Dynamic destination 
guidance145
Dynamic Stability Control 
DSC89
– indicator/warning lamp90
Dynamic Traction Control 
DTC
– indicator/warning lamp90
E
EBV Electronic brake-force 
distribution89
Eject button, refer to Buttons 
on the CD/DVD player154
Electrical defect
– 7-gear Sports automatic 
transmission with double 
clutch63
Electrical malfunction
– door lock30
– driver's door30
– fuel filler flap206
– glass roof38
Electric seat adjustment44
Electric steering wheel lock
– with Comfort Access34
Electronic brake-force 
distribution EBV89
Electronic oil level check223Electronic Stability Program 
ESP, refer to Dynamic 
Stability Control DSC89
Emergency actuation, 
automatic transmission, 
refer to Overriding selector 
lever lock59
Emergency operation
– fuel filler flap, manual 
release206
Emergency operation, refer to 
Closing manually
– glass roof38
Emergency operation, refer to 
Manual operation
– door lock30
Emergency release
– trunk lid from inside32
Emergency Request238
Emergency services, refer to 
Roadside Assistance238
Energy, saving
– saving fuel126
Engine
– breaking in126
– data246
– overheated, refer to Coolant 
temperature76
– speed246
– starting56
– starting, Comfort Access33
– switching off56
Engine compartment223
Engine coolant, refer to 
Coolant226
Engine oil
– adding225
– alternative oil types225
– BMW Maintenance 
System227
– capacity250
– checking level223
– intervals between changes, 
refer to Service 
requirements80
Engine output, refer to Engine 
data246