
At a glance
 19Reference
Controls
Driving tips
Communications
Navigation
Entertainment
Mobility
4.Turn the controller until "Time:" is high-
lighted, and then press the controller.
5.Turn the controller to set the hours and 
press the controller.
6.Turn the controller to set the minutes and 
press the controller.
Status information
1Time
2Display for:
>Reception strength of the wireless 
network, depends on the mobile phone
>Incoming, outgoing or missed call
>SMS
* received
3Display for:
>Entertainment:
Radio, CD/DVD, external devices
>Telephone
*:
Name of the mobile phone paired with 
the vehicle4Sound output is switched off or
display for traffic bulletins
*:
>"TI": 
Traffic bulletins are switched on.
>No display: 
Traffic bulletins are switched off.
Other displays:
Status information is temporarily hidden during 
Check Control message displays or entries via 
the voice activation system
*.
Switching the Control Display 
off/on
1.Press the OPTIONbutton.
2."Switch off control display"
Press the controller to switch on.
Professional navigation system: split 
screen
Additional information, e.g. from the computer, 
can be displayed on the right side of the split 
screen.
On the split screen, this information remains 
visible even when you change to another menu.
Switching the split screen on and off
1.Press the OPTIONbutton.
2."Split screen"
 The split screen is activated. 

iDrive
20
Selecting the display for the split 
screen content
When the split screen is switched on, you can 
select the content displayed on the screen.
1.Move the controller to the right repeatedly 
until the split screen content is selected.
2.Select the display.
Programmable memory keys
Certain iDrive functions can be stored on the 
programmable memory keys and called up 
directly, e.g. radio stations, navigation destina-
tions, phone numbers and entry points into the 
menu.
Storing functions
1.Highlight the function via the iDrive.
2. ...   Press the desired key for 
longer than two seconds.
Example for programmable memory 
keys
Switch the voice instructions for the navigation 
on/off.
1."Navigation"
2."Map"
3.Select the  symbol using the controller.
4. ...   Press the desired key for 
longer than two seconds.
Executing a function
 ...   Press the button.
The function is executed immediately. This 
means, for example, that the number is dialed 
when a phone number is selected.
Displaying memory key assignments
Touch the button with a finger. Do not wear 
gloves or use objects.
Displaying brief information
 ...   Touch the button.
The key assignment is displayed at the top 
edge of the screen.
Displaying detailed information
 ...   Touch the button for an 
extended period. 

At a glance
 21Reference
Controls
Driving tips
Communications
Navigation
Entertainment
Mobility
Letters and numbers
Entering letters and numbers
1.Turn the controller: select the letters or 
numbers.
2.Select additional letters or numbers if 
needed.
3."OK": confirm the entry.
Switching between letters and 
numbers
Depending on the menu, you can switch 
between entering letters and numbers:
Wordmatch concept during navigation
Entry of names and addresses: the selection is 
narrowed down every time a letter is entered 
and letters may be added automatically.
Destination search: the entries are continuously 
compared to the data stored in the vehicle.
>The only letters offered for entering 
addresses are those for which data are 
available.
>Town/city names can be entered with 
the spelling used in any of the languages 
available on the Control Display.
SymbolFunction
Press the controller: delete 
one letter or number
Press the controller for an 
extended period: delete all 
letters or numbers
Enter a blank space
SymbolFunction
Entering letters
Entering numbers 

At a glance
 23Reference
Controls
Driving tips
Communications
Navigation
Entertainment
Mobility
Terminating or canceling voice 
activation system
Press the  button on the steering wheel
or
In dialogs that call for a text of your choice, the 
procedure can only be canceled using the but-
ton on the steering wheel.
Possible commands
The commands available in each case depend 
on the menu item selected on the Control Dis-
play.
To have the available commands read aloud:
For example, if "CD" is selected, the commands 
for operating CD/Multimedia are read aloud.
Calling up functions immediately via 
short commands
Short commands enable you to perform certain 
functions immediately, irrespective of which 
menu item is selected, refer to page251.
Example: selecting the track of a CD
1.If necessary, switch on entertainment audio 
output.
2.Press the  button on the steering wheel.
Setting the voice dialog
You can set whether the system should use the 
standard dialog or a shorter variant. In the 
shorter variant of the voice dialog, the prompts 
and responses from the system are abbrevi-
ated.
1."Settings"
2."Language/Units"3."Speech mode:"
4.To select the setting:
>"Default"
>"Short"
Notes
To operate the phone by voice, refer to 
page192.<
For voice commands, bear in mind the follow-
ing:
>Do not use the voice activation system to 
initiate an Emergency Request. In stressful 
situations, the voice and vocal pitch can 
change. This can unnecessarily delay the 
establishment of a telephone connection.
>Pronounce the commands and digits 
smoothly and at normal volume, avoiding 
excessive emphases and pauses. This also 
applies when spelling out and saying a full 
word during destination entry.
>When selecting a radio station, use the 
standard pronunciation of the station name.
>For entries in the voice-activated phone 
book, only use names in the language 
of the voice activation system and no 
abbreviations.
>Keep the doors, windows and glass roof 
closed to prevent interference from outside 
noise.
>Avoid ambient noise in the vehicle while 
speaking. {Cancel}
{Voice commands} or {Help}
3.Select the music track, e.g.: 
{C D track 4}
System says: 
{{Track 4}} 

Controls
 27Reference
At a glance
Driving tips
Communications
Navigation
Entertainment
Mobility
>Settings for the display on the Control 
Display and in the instrument cluster:
>12h/24h format of the clock, refer to 
page83
>Date format, refer to page84
>Brightness of the Control Display, refer 
to page87
>Language on the Control Display, refer 
to page87
>Units of measure, refer to page80
>Show visual warning for Park Distance 
Control PDC
*, refer to page89
>Light settings:
>Welcome lamps, refer to page101
>Pathway lighting, refer to page102
>Daytime running lights, refer to 
page102
>High-beam assistant, refer to page103
>Automatic climate control: activating/deac-
tivating AUTO program, cooling function 
and automatic recirculated-air control, set-
ting temperature, air volume and distribu-
tion, refer to page107 ff
>Entertainment:
>Tone control, refer to page154
>Speed-dependent volume control, refer 
to page155
Central locking system
The concept
The central locking system functions when the 
driver's door is closed.
The system simultaneously engages and 
releases the locks on the following:
>Doors
>Trunk lid
>Fuel filler flap
>Convertible: glove compartment
Operating from outside
>Via the remote control
>Via the door lock
*
>In cars with Comfort Access*, via the 
handles on the driver's and front passenger 
doors
In addition, if the remote control is used, the 
welcome lamps, interior lamps and the door's 
courtesy lamps
* are switched on or off. The 
alarm system
* is also armed or disarmed.
For further details of the alarm system,
 refer to 
page32.
Operating from inside
By means of the button for central locking, 
refer to page30.
In the event of a sufficiently severe accident, the 
central locking system unlocks automatically. In 
addition, the hazard warning flashers and inte-
rior lamps come on.
Opening and closing:
Using the remote control
Persons or animals in a parked vehicle 
could lock the doors from the inside. You 
should therefore take the remote control with 
you when you leave the vehicle so that the latter 
can be opened from outside.<
Convertible: to operate the retractable 
hardtop with the remote control, the 
doors and trunk lid must be closed and the 
cargo area partition must be folded down and 
engaged on both sides. Refer also to page39.<
Unlocking
Press the  button.
The interior lamps, the courtesy lamps
* and the 
welcome lamps come on. 

Controls
 29Reference
At a glance
Driving tips
Communications
Navigation
Entertainment
Mobility
3.Press down the cargo area partition until it 
engages on both sides and close the trunk 
lid.
4.Press the  button for a longer period to 
fold the retractable hardtop back in.
Confirmation signals
You can activate or deactivate the confirmation 
signals.
1."Settings"
2."Door locks"
3."Flash when lock/unlock"
4.Press the controller.
 Flashing when locking/unlocking the 
vehicle is switched on.
Malfunctions
The remote control may malfunction due to 
local radio waves. If this occurs, unlock and lock 
the car at the door lock with the integrated key.
Coupe: in vehicles without an alarm system
* or 
Comfort Access
*, only the driver's door can be 
locked and unlocked with the integrated key via 
the door lock.
Convertible: if hardtop movement via the 
remote control is interrupted briefly, the move-
ment will be completed more quickly if you keep 
the corresponding button pressed continu-
ously.
If the car can no longer be locked with a remote 
control, the battery in the remote control is dis-
charged. Use the remote control on an 
extended trip to recharge the battery, refer to 
page26. The remote control for Comfort 
Access
* contains a battery that may have to be 
changed, refer to page35.
For US owners only
The transmitter and receiver units comply with 
part 15 of the FCC/Federal Communications 
Commission regulations. Operation is gov-
erned by the following:
FCC ID:
LX8766S 
LX8766E 
LX8CAS
Compliance statement: 
This device complies with part 15 of the FCC 
Rules. Operation is subject to the following two 
conditions:
>This device must not cause harmful inter-
ference, and
>this device must accept any interference 
received, including interference that may 
cause undesired operation.
Any unauthorized modifications or 
changes to these devices could void the 
user's authority to operate this equipment.<
Opening and closing:
Using the door lock
You can set the way in which the car is 
unlocked, refer to page27. 

Controls
 31Reference
At a glance
Driving tips
Communications
Navigation
Entertainment
Mobility
Unlocking and opening doors
>Either unlock the doors together using the 
button for the central locking system and 
then pull the door handle above the armrest 
or
>pull on the door handle of each door twice: 
the first time unlocks the door, the second 
time opens it.
Locking
>Use the central locking button to lock all of 
the doors simultaneously, or
>press down the safety lock button of a door. 
To prevent you from being locked out, the 
open driver's door cannot be locked using 
the lock button.
Persons or animals in a parked vehicle 
could lock the doors from the inside. You 
should therefore take the remote control with 
you when you leave the vehicle so that the latter 
can be opened from outside.<
Trunk lid
In order to avoid damage, make sure there 
is sufficient clearance before opening the 
trunk lid.<
Opening from inside
Press the button: the trunk lid opens unless it 
has been locked.
Opening from outside
Press the button, see arrow, or the  button 
on the remote control for a longer period. The 
trunk lid will open slightly. It can now be swung 
upwards.
In the event of a malfunction, please con-
tact your BMW center or a workshop that 
works according to BMW repair procedures 
with correspondingly trained personnel.<
Coupe: locking or unlocking separately
The switch is located in the glove compartment.
1Locking the trunk lid
2Unlocking the trunk lid
Locking separately
Push the switch in the direction of arrow 1. 
The trunk lid is locked and cannot be unlocked 
using the central locking system. 
If you give the remote control without the inte-
grated key to someone else while the glove 
compartment is locked, the trunk lid cannot be 
opened. This is an advantage when valet park-
ing, for example. Locking the glove compart-
ment, refer to page114. 

Controls
 33Reference
At a glance
Driving tips
Communications
Navigation
Entertainment
Mobility
Indicator lamp displays
>The indicator lamp under the inside rear-
view mirror flashes continuously: the sys-
tem is armed.
>The indicator lamp flashes after locking: 
doors, hood or trunk lid are not properly 
closed. Even if you do not close the alerted 
area, the system begins to monitor the 
remaining areas, and the indicator lamp 
flashes continuously after approx. 
10 seconds. The interior m o t i o n  s e n s o r  a n d  
the tilt alarm sensor are not activated.
>The indicator lamp goes out after unlocking: 
your vehicle has not been disturbed while 
you were away.
>If the indicator lamp flashes after unlocking 
until the remote control is inserted in the 
ignition, but for no longer than approx. 
5 minutes: your vehicle has been disturbed 
while you were away.
Tilt alarm sensor
The tilt of the vehicle is monitored. The alarm 
system reacts, e.g. to attempts to steal a wheel 
or tow the vehicle.
Interior motion sensor
Coupe
In order for the interior motion sensor to func-
tion properly, the windows and glass roof must 
be completely closed
*.
Convertible
The interior of the car is monitored up to the 
height of the seat cushions. Thus the alarm sys-
tem is activated together with the interior 
motion sensor even if the hardtop is open. The 
alarm can be triggered unintentionally by falling 
objects such as leaves, refer to Avoiding unin-
tentional alarms.
Avoiding unintentional alarms
The tilt alarm sensor and interior motion sensor 
may be switched off at the same time. This pre-
vents unintentional alarms, e.g. in the following 
situations:
>In duplex garages
>During transport on car-carrying trains, 
boats/ships or on a trailer
>When animals are to remain in the vehicle
Switching off tilt alarm sensor and 
interior motion sensor
Press the  button on the remote control 
again as soon as the vehicle is locked.
The indicator lamp lights up briefly and then 
flashes continuously. The tilt alarm sensor and 
the interior motion sensor are switched off until 
the next time the vehicle is unlocked and subse-
quently locked again.
Comfort Access*
Comfort Access enables you to enter your vehi-
cle without needing to hold the remote control 
in your hand. All you need to do is wear the 
remote control close to your body, e.g. in your 
jacket pocket. The vehicle detects the corre-
sponding remote control within the immediate 
vicinity or in the passenger compartment.
Comfort Access supports the following func-
tions:
>Unlocking/locking the vehicle
>Unlocking the trunk lid separately
>Engine starting
>Convenient closing