2011 AUDI TT ROADSTER Owners Manual

Never dry windows with the same chamois
that you use to dry painted surfaces . Wax resi­
due on the chamois can impair vision through
the windows.
_& WARNING
- The windshield must not be treated with
water-repellent materials. They can in­
crease glare under poor visibility condi­
tions such as wetness, darkness, or when
the sun is low on the horizon. In addi­
tion, they can cause the windshield wip­
ers to chatter.
- Always read and heed all WARNINGS and
other information <=;>
page 162.
([) Note
-Never use warm or hot water to remove
snow and ice from windows and mirrors.
This could cause the glass to crack.
- To prevent damage to the wires of the
rear defogger, do not place any adhesive
stickers on the inside of the rear window
over the wires.
- To help prevent dirt from scratching the
window, always scrape in a forward di­
rection -pushing the scraper away from
you -never back and forth.
Weatherstrips
Complete car care includes the weatherstrips
as well.
.,. Apply a suitable rubber conditioner to the
weatherstrips from time to time.
To be able seal properly, the weatherstrips
around the hood, doors, rear lid, etc. must re­ main pliable . Spray the weatherstrips with sil­
icone or coat them with talcum powder or
glycerine to retain the flexibility of the rubber
and to protect them against freezing in the
winter .
_& WARNING
Always read and heed all WARNINGS and
the information
¢page 162.
Cleaning and protection 167
(D Tips
Keep silicone sprays off the windshield to
avoid wiper smear in rain.
Steel wheels
App lies to vehicles : wit h stee l w hee ls
The wheels also have to be cleaned.
.,. Always include the hub caps and wheel rims
when washing your vehicle to remove road
dirt, salt sprays and brake dust.
If necessary, use a commercial wheel cleaner
to remove accumulated brake dust.
The wheel rims are easier to keep clean if they
are regularly coated with liquid wax.
Paint scratches should be touched up as soon
as possible to prevent corrosion
¢ page 166,
Touch-up paint .
_& WARNING
-Moisture and ice on brakes may affect
braking efficiency-
¢page 151, General
information. Test the brakes carefully af­
ter each vehicle wash.
-Always read and heed all WARNINGS and
the information¢
page 162.
Cast (light) alloy wheels
Applies to vehicles : wi th Cas t alloy w hee ls
-
Cast (light) alloy wheels require special care .
.,. Wash the wheels with a sponge or hose
brush every other week .
.,. For deep cleaning afterwards, use only a
dedicated
acid-free cast alloy wheel cleaner .
.,. Rub a coat of
liquid wax onto the rims every
three month. Be sure to reach and treat all
parts of the rim.
To preserve the decorative appearance of the
cast alloy wheels, some special care is neces­
sary. In addition to road dirt and salt, brake
dust is also corrosive. If left on for too long,
brake dust can cause pitting. .,..
•
•

168 Cleaning and protection
Use only special acid -free cleaners form ulated
for a lloy rims. Safe products are available at
your Aud i dealer. Never leave the cleaner on
the r ims longer than spec ified on the label. If
not rinsed
off promp tly, the acid conta ined in
some cleaners can attack the threads on the
wheel bolts .
Never use abras ive or metal polishing clean ­
ing agents. If the protective coating has been
chipped, e .g . by k icked up road dirt, touch it
up as soon as poss ible.
A WARNING
- Moisture and ice on brakes may affect
braking efficiency ¢
page 151, General
information.
Test the brakes c aref ully
each t ime you wash the veh icle.
- Always read and heed all WARNI NGS and
other informa tion ¢
page 162.
Body cavity sealing
-
The body cavity sealing does not need to be
checked.
A ll body cavities wh ich could be affected by
corrosion have been give n thorough protec­
tion at the facto ry.
T his sea ling does not require any inspection or
addit io nal treatment. If any wax should seep
out of the cav ity when the ambient tempera­
ture is high, it can be removed w it h a plastic
scrape r and a su itab le so lven t.
A WARNING
So lvents can be dange rous.
- B enzine is flammable and t oxic.
If you
use benzine for removing the wax, keep
spar ks, flame and lighted c igaret tes
away. Never dump benzine on t he
ground, into open streams or down sew­
age drains.
- Be sure to observe all safety and env iron­
menta l regulations . Follow all instruc­
t ions on the container.
- Always read and heed all WAR NIN GS and
the in format ion
¢page 162.
Chassis
Have the undercoating checked for damage
from time to time.
The lower body shell of your Aud i is also thor­
oughly protected against cor ros io n.
Any damage to the unde rcoating ca used by
road ha zards should be repaired prompt ly.
A WARNING ....__
Too much undercoating in the wrong p la­
ces can cause a fire.
- Do not app ly additional undercoating or
r u stp roof ing on or near the exhaust
manifold, exhaust pipes, catalytic con­
ver ter or heat shields. While driving, the
substance used fo r undercoating could
overhea t and cause a fire.
- Always read and heed all WAR NINGS and
o ther info rmation
¢ page 162.
Exhaust tail pipes
Road salt and o ther co rrosive materials w ill
damage the mate ria l in the e xhaus t tail pipes
i f they are not cleaned regular ly . Do not clean
the tail pipes with w hee l cleaner, pa int polish,
c h rome polish or other ab rasive cleane rs .
Clean the tail pipes with car care products
t h at are suitable for sta inless steel.
Your a uthorized Audi dea ler can prov ide clean ­
ing products that have been tested and ap­
proved for your vehicle .
Care of interior
Radio-/Navigation* display
.. Clea n the dis play wi th a soft clean clo th and
a n LC D cleaner.
T he disp lay can be cleaned with a profess io­
nally ava ilab le " LCD clea ner". The clot h should
be s ligh tly d ampened wit h the cleaning flui d
to clean the disp lay. .,..

(D Note
To avoid scratching the display, you should never clean it dry.
Aluminum trim
Use only neutr al- pH products to remove spots
and depos its from alum inum surfaces.
Chrome care products and alkaline cleaners
will attack alum inum su rfaces and can dam­
age them over time.
A WARNING
Always read and heed a ll WARNINGS and
t he information<=>
page 162.
Fabrics and fabric coverings
Fabrics and fabric coverings (e .g. seats, door
trim panels, etc.) should be cleaned at regular
interva ls with a vacuum cleaner. T his removes
surface dirt particles which could become em­
bedded in the fabr ic through use. Steam
cleaners should not be used, because the
steam tends to push the dirt deeper into the
fabric and lock it there.
Norm al cleaning
Generally, we recommend using a soft sponge
or a lint-free microfiber cloth to the clean fab­
ric. Brushes should only be used for carpets
and floor mats, s ince other fabric surfaces
could be harmed by b rushes .
Normal surface sta ins can be cleaned using a
commercially available foam cleaner . Spread
the foam on the surface of the fabric with a
soft sponge and work it in gently . Do not satu­
rate the fabric. Then pat the foam d ry using
absorbent, dry cloths (e.g. microfibe r clo th)
and vacuum it afte r it has dr ied comp lete ly.
Cl eaning stains
Stains caused by beve rages (e .g. coffee, fruit
juice, etc.) can be t reated with a mild deter­
gent solution. App ly the dete rgent so lution
wi th a sponge. In the case of s tubbor n stains,
a detergent paste can be applied directly to
Cleaning and protec tion 169
the stain and worked into the fabric. After ­
wards, use copious amounts of clean water to
remove the rema in ing detergent. Apply the
water with a damp cloth or sponge and pat
the fabric dry with an absorbent, dry cloth.
Stains from choco late or makeup should have
detergent paste (e.g . ox-gall soap) rubbed in ­
to them. Afterwards, remove the soap with
water (damp sponge).
A lcohol can be used to treat stains from
grease, o il, lipstick or a ballpoint pen. Melted
grease or dye must be patted off using ab­
sorbent mater ial. It may be necessary to re­
treat the areas with detergent paste and wa­
te r.
In the case of genera l soiling of the uphols­
tery and cover material, we recommend hir ing
a specia list that has the equipment to clean
t h e seat covers and othe r fabr ic surfaces by
shampooing and spray extraction .
A WARNING
Always read and heed all WARNINGS and
the info rmation
<=> page 162.
@ Tips
Open Velcro fasteners on your clothing can
damage the seat cover. Please make sure
that Ve lcro fasteners are closed.
Plastic parts and instrument panel
A lways use a clean clo th moistened in clea r
water to clean these areas . For pe rsistent d irt
u se an Aud i approved
solvent-free p lastic
clea ner/protectant.
A WARNING
Solvents can change the properties of
some plastics and make it harder for the
a irbag to deploy.
-
- Never clean the instrument panel or the
surface of Airbag modu les with cleaning
products that co nta in solvents .
- Products containing solvents will make
the surface of this part porous. •
•

170 Cleaning and protection
-Serious injuries can result if plastic parts
come loose when the airbag is deployed.
- Always read and heed all WARNINGS and
the information
¢page 162.
(D Note
Cleaning agents containing solvents will
attack the material and can change the
way it behaves.
Instrument cluster glass
~ Clean the glass with a soft, damp cloth .
In order to preserve the anti-glare properties
of the instrument cluster glass, it should only
be cleaned with a soft, damp cloth.
Natural leather
Applies to vehicles: with natural leather
Audi makes great efforts to maintain the
properties , natural look and feel of interior
leather.
General
We offer many different types of leather on
our vehicles. Most are different types of nappa
leather, which has a smooth surface and
comes in various colors .
The intensity of the color determines the visu­
al characterist ics and appearance. If the sur­
face of the leather has a typical natural look,
then the leather is a nappa leather that has
been left in a relatively natural condition. This
leather offers par ticularly good com fort and
breathes well . Fine veins, closed grains , insect
bites, skin folds , and subtle variations in color
remain visible. These characteristics demon­
strate that the material is natural.
Natural nappa leather is not covered by a col ­
or finish .
It is therefore more sensitive to soil­
ing and wear, which is something you need to
consider if children, animals or other factors
might prove to be particularly hard on the
leather.
By contrast, leather types that are covered by
a colored finish layer are more durable. This has a positive effect on the leather's resist­
ance to wear and soiling in daily us
e. On the
other hand, the typical characteristics of natu­
ral leather are barely or not apparent. Howev­
er, this does not mean that the leather itself
is of inferior quality .
Care and handling
Because of the exclusive nature of the types of
leather that Audi uses and their unique prop­
erties (such as sensitivity to oils, grease, soil­
ing, etc.), you will need to be somewhat care­
ful with these leathers, and a certain type of care is required. For example, dark clothing
materials can discolor leather seats (especial­
ly if such clothing is damp and was not dyed
correctly) . Dust and dirt particles in pores,
folds, and seams can have an abrasive effect
and can damage the leather surface as well as
weaken seams.
The leather should be cleaned regularly as
needed. After having been used for a relatively
long time, your leather seats will acquire a
rich aged finish. This is a characteristic of nat­
ural leather and a sign of true quality .
In order to maintain the value of this natural
product over the life of your vehicle, you
should follow the recommendations below:
(D Note
- To keep your leather from bleaching out,
do not allow it to be exposed to bright
sunlight for long periods of time. If you
have to leave the vehicle parked outside
for long periods, cover the leather to
protect it from direct exposure to sun­
light .
- Sharp objects on clothing, such as zip­
pers, rivets or sharp pieces on belts can
leave permanent scratches or scrape
marks on the surface of the leather.
(l) Tips
-After each time you clean the leather and
at regular intervals, use a leather preser­
vative creme that contains UV-blockers
and that works into the leather. This

creme will nourish and moisturize the
l eather, helping it to b reathe and stay
supple . It also helps to b uild up a protec­
tive coat ing on the surface.
- Clean the leather every 2 -3 months,
and clean any areas that get soiled.
- Remove fresh marks made by ba llpoint
pens, ink, lipstick, shoe polish, etc . as
soon as possib le.
- Preserve the color of the leather as need­
ed by using a special colored leather care
creme to touch up areas of uneven color.
Cleaning and caring for leather
upholstery and trim
App lies to vehicles: with natural leather
Natural leather requires special care and at­
tention .
Normal cleaning
~ Clean soi led areas with a slightly moistened
cotton or woolen cloth.
Mor e stubborn dirt
~ More stubbo rn dirt can be removed using a
cloth saturated with a mi ld soap so lution (2
tablespoons mi ld liquid soap) .
~ Never allow the soap so lution to saturate
the leather, and make certa in that no water
soaks into the seams .
~ Wipe off the soap solution with a soft, dry
cloth .
Cleaning sp ots
~ Remove fresh wa ter-b ase d spots (such as
coffee, tea, ju ices, blood) w ith an absorbent
cloth or paper towel.
~ Remove fresh gr ease or oi l-ba sed spot s
(such as butter, mayonnaise, chocolate) with
an absorbent cloth or paper towe l, or use
the cleane r from the leathe r care kit if the
spot has not yet pene trated into the surface
of the leather .
~ Use an oil/grease dissolving spray, if oil/
grea se spots h ave d ried on.
~ Remove specific kinds of spots (ballpoint
pen, felt marker, fingernail polish, water-
Cleaning and protec tion 17 1
based paint, shoe po lish, etc.) with a spot
remover specifically formu lated for leather .
Le ather car e
~ Every half year use an approved leather care
product (available from your Audi dea ler) to
care for the leathe r.
~ App ly the product very sparingly.
~ Wipe it off with a damp clot h.
If you have any questions about cleaning and
caring for the leather in your vehicle, it is best
to contact your a uthorized Audi dea ler, who
will be g lad to help you and tell you abo ut our
full range of leather care products, such as:
- Leather cleaning and care kit
- Cremes to care fo r colored lea ther
- Spot removers for ballpoint pens, shoe pol-
ish, etc.
- Oil/grease d issolving spray
- New and upcom ing products.
A WARNING
Always read and heed all WARNINGS and
the information <=) page 162.
Q) Note
-Never use chemical so lvents (e.g. lighter
fluid, tu rpentine), waxes, shoe polish or
simi lar products on the leather surfaces
in yo ur Audi .
- T o avoid damage, have stubborn sta ins
removed by a comme rcial clean ing spe­
cialist.
Cleaning Alcantara ® (synthetic suede)
Applies to vehicles: with Alcantara upholstery
Removing dust and dirt
~ Moisten a cloth, squeeze out excess water
and wipe down the seat surfaces.
Removing stains
~ Moisten a cloth with lukewarm water or
w ith diluted
ethyl (rubbing ) alcohol.
~ Dab at the stain . Start at the outs ide and
work inwards . •
•

172 Cleaning and protection
• Once the stain is no longer visib le, use a soft
dry cloth or tissu e to soak up the moisture .
Do not use leather cleaning produc ts on Al ­
cantara .
You may use a suitable shampoo fo r remov ing
dust and dirt.
Dust and grit in the pores and seams can
scratch and damage the surface . If the car is
l eft stand ing i n the sun fo r long pe riods, the
A lcantara should be p rotected against direc t
sun light to preven t it from f ad ing. Slig ht color
va ria tions will develop in normal use an d are
not an indication of material deterioration .
CI) Note
-Never use chemi cal solven ts (e.g. lighter
fl uid , turpentine), waxes, shoe po lish or
s imilar products on Alcantara ® sur faces.
- To avoid damage, have stubborn stains
r emoved by a commerc ia l cleaning spe ­
cia list.
- Do no t use br ushes, st iff sponges or sim­
ilarly abrasive cleaning a ids.
Safety belts
Only well-maintained safety belts work relia ­
bly when ne eded .
Heavily soiled safety belts may not retr act
p rope rly.
• Keep be lts clean.
• For cleaning, use a m ild soap and wate r sol­
u tio n. Le t be lts d ry thoro ughly and away
from direct s unli gh t.
• Do no t all ow ine rtia reel safety be lts to re­
t ract before they are completely d ry .
• Check the condition of your safety belts
reg­
ularly.
A WARNING
Damaged safety belts can break in a crash.
1l Use o nly th e co rrec t cle anin g so lu ti on s. Ne ver use gas­
oli ne or d ie se l fuel.
- Anyth ing that might damage yo ur sa fety
be lts could mean that you and your pas­
sengers would not be adequate ly pro ­
tected in an accident .
- Safety belt performance depends on co r­
rect insta llation. Never remove be lts
from the veh icle to clean them .
- Do not use chemical clea ning agents,
b leach or dyes . They have corrosive prop­
ert ies which wea ken the webb ing .
- When clean ing your safety be lts, inspect
them for damage . If you discover dam ­
age, see your Audi dea ler .
'
-Always read a nd heed a ll WARNINGS and
the information
<=;> page 162 .
Engine compartment
Be especially careful when cleaning the en­
gine compar tment.
Always switch off the ignition before clean­
ing the engine<=;>.&, .
Plenum panel
Remove leaves from the plenum panel in front
of the w indshield under the eng ine hood . This
preve nts the water drain holes from becomin g
block ed, and it prevents debris from enter ing
the ve hicle interio r thr ough the heating and
ventilat ion duc ts.
Corrosion protection
T he eng ine compartment and transmission
have been corrosion -protected at the factory .
G ood anti- corrosio n treatmen t is very impor­
tant, par ticul arly in the w inter.
If the vehi cle
is frequently driven on salt t reated roads, the
entire engine compa rtment an d plen um panel
sho uld be thoro ughly cleaned at the end of
winter and retreated to prevent salt damage.
At the same time, the unde rside of the vehicle
shou ld be washed as well.
If the engine compa rtment is cleaned at any
time with grease remov ing solutions
1> , or if ..,.

you have the engine washed, the anti-corro­sion treatment is a lmost always removed as
wel l. It is therefore essential to have a long­
lasting corrosion protection reapplied to all
surfaces, seams, joints and components in the
engine compartment .
A WARNING
Be aware: The engine compartment of any
motor vehicle is a potentially hazardous
area.
- Before working in the engine compart­
ment, be sure to read the informat io n
c::.>page 172.
- Before reaching into the front plenum
pane l, always remove the ignition key.
O therw ise, the windshield wipe r system
cou ld unintentiona lly be switched on,
poss ibly causing pe rsonal injury from the
moving wiper linkage .
- Never reach into the area around or
touch the radiator fan. The auxiliary fan
is temperature controlled and can switch
on suddenly- even when the ign it ion is
off.
- Do not wash, wax or dry the engine w ith
the engine running. Moving or hot parts cou ld injure you .
- Do not clean the underside of the chas­ sis, fenders, wheel covers, or other hard
to reach parts w ithout protecting your
hands and arms. You may cut yourse lf on
sharp-edged metal parts .
- Always read and heed all WARNINGS and
other information
c::.> page 162.
Cleaning and protec tion 173
•
•

174 Fuel supply and filli ng your fuel tank
Fuel supply and filling
your fuel tank
Gasoline
Fuel supply
Using the right fuel helps keep the environ­
ment clean and prevents engine damage .
Fuel recomm endation
The fuel recommended for your vehicle is un ­
lead ed pr emium
grade gasoline . See also
¢ page 239, Data . Audi recommends using
TOP TIER Detergent Gasol ine with a minimum
octane rating of 91 AK I (95 RON). For more
information on TOP TI ER Detergent Gasoline,
p lease go to the officia l website (www.toptier­
gas.com).
The recommended gasoline octane rating for
your engine can a lso be found on a label locat­
ed on the inside of the fuel filler flap . This rat­
ing may be specified as AKI or RON.
Your veh icle may also be operated using un­
leaded regular gasoline with a minimum oc­
tane rating of 87 AKI/91 RON . However, using
87 AKI/91 RON octane fue l wi ll slightly re ­
duce engine performance.
U se unl ead ed gasolin e onl y. Unleaded gaso­
line is available throughout the USA, Canada ,
and in most European countries . We recom­
mend that you do not take your vehicle to
areas or countries where unleaded gasoline may not be available.
F or more informat ion on refue ling your vehi­
cle, see
¢ page 175.
Octane rat ing
Octane rating ind icates a gasoline's ability to
resist engine damaging "knock" caused by
premature ign ition and detonation. Therefore,
buying the correct grade of gasoline is very
important to help prevent possible engine
damage and a loss of engine performance.
Gasoline most commonly used in the United
States and Canada has the following octane ratings that can us
ually be found on the fi ller
pump:
- Premium Grade: 91 -96 AKI
- Regular Grade: 87 - 90 AKI Explanation of the abbreviations:
AKI = Anti Knock Index = (R+M)/2 = (RON
+ MON)/2
RON= Research Octane Number
MON = Motor Octane Number .
(D Note
-Do not use any fuel w ith octane rat ings
lower than 87 AKI or 91 RON otherwise
expensive engine damage w ill occur.
- Do
not use leaded gasoline! The use of
leaded gasoline w ill severely damage
your vehicle's catalytic converter and its
ability to control exhaust emissions .
Blended gasoline
Use of gaso line co ntainin g alc ohol or
MTBE (m ethyl tertia ry butyl eth er)
You may use unleaded gasoline blended with
alcohol or MTBE (commonly referred to as
oxygenates) if the blended mixture meets the
fo llowing criteria:
Blend of gaso line m ethanol (wood alc ohol or
methyl alcohol )
-Anti -knoc k index must be 87 A KI or h igher.
- Blend must contain no more than 3% meth-
anol.
- Blend must contain more than 2% co-sol-
vents .
Blend of g asoline and etha nol (gra in alcohol
or eth yl alcohol )
-Anti -knock index must be 87 AKI or higher .
- Blend must not contain more than 10% ethanol.
Blend of g asoline a nd MTBE
-Anti-knock index must be 87 AKI or h igher . ll-