
Instruments  and  warning /indicator  lights 
(I) Tips 
•  T he  dig ita l clock  and  the  odomete r are  t urned  on  for  about  30 
seconds  when  the  driver's  door  is opened . 
•  When  the  ign ition  is turned  off,  the  odometer  read ing  and  the 
digital  clock  with  date  disp lay can  be  switc hed  on  for  about 
30  se conds  by press ing  the 
[CH ECK! button~ page 11, fig.  5.  • 
Speedometer  with  odometer 
The speedometer  shows  you  the  vehicle speed,  and  the 
odometer  shows  you  how  many  miles  (kilometers)  you 
have  driven . 
Fig. 4  Instrume nt 
clu st e r O dom eter a nd 
r e se t  bu tton 
The  odometer  and  tr ip odometer  are  located  inside  the  speedometer . 
•  USA models  -Miles 
•  Canada  models  -Kilometers 
You can  sw itch  the  display  from  miles  to  kilometers  and  vice versa  via 
t he  MM I. 
Lower  odometer 
The  lowe r odometer  shows  the  total  n umber  of  m iles  ( kilometers) 
dr iven . 
Upper  odometer  (trip  odometer) 
The  upper  odometer  shows  the  total  n umber  of  m iles  (k ilometers) 
dr iven  since  you  last  reset  the  odometer  to  zero . You can  use  th is 
odometer  when  yo u want  to  keep  track  of  how  many  m iles  (kilome 
ters)  you  have  dr iven for  a sing le trip  or  errand.  The  last  d igit  indicates 
1/10  of  a  mile  (100  meters) . 
You can  reset  t he  tr ip odometer  to zero  by pressi ng t he Rese t bu tto n 
~ o.o. 
Malfunction  message 
If  there  is  a  malfunction  somewhere  in the  instrument  cluster,  dEF 
w ill  appear  in  the  tr ip odomete r and  will  s tay on . Con tact  yo ur autho
r ized  Audi dealer  to  have  the  problem  corrected. 
[  i ] Tips 
•  The  d igita l clock  and  the  odometer  are  turned  on  for  about  30 
seconds  when  the  driver 's  door  is opened . 
•  When  the  ignition  is turned  off,  the  odometer  reading  and  the 
dig it a l cl ock  with  date  d isp lay  can  be  sw itched  on  for  abou t 
30  seconds  by pressing  the  [ 
CHECK! button=> page 11 , fig.  5.  • 
Fuel  gauge 
The  fuel  gauge  only  works  when  the  ignition  is on. 
When  the  need le reaches  the  rese rve mark,  the~ 
page 30  symbol 
appea rs  in the  instrument  cluste r display  as  we ll as  the  message 
Plea se  refuel. T here  are  approximate ly between  1.8  and  2.4  gallons 
(7-9  l ite rs)  of  fuel  left . This  message  is  meant  to  remind  yo u to 
refuel. 
Th e  to tal  tank  capa city  of yo ur vehicle  is  liste d in ~ page 343.  

Instruments  and  warning /indicator  lights 
- Press the"+"  button  to  increase  the  brightness  during  the 
hours  of  darkness. 
- Press the"-"  button  to  decrease the  brightness  during  the 
hours  of  dark ness. 
A  light  sensor  in the  instrument  cluster  contro ls the  illumination  for 
the  instrument  cluster,  the  center  console  and the  displays.  In  a 
br ight  env ironment,  using  the  buttons  to  change the  br ightness  has 
no effect . 
[ i ] Tips 
The illumination  for  the  instrument  cluster  lights  up whenever  you 
switch  on  the ig nition  with  the  vehicle  head lights  off.  As the  daylight 
fades,  the  instrument  cluster  illum inat ion likewise  d ims automati
cally  and w ill go out  completely  when  the  outside  light  is very low. 
Th is feature  is meant  to  remind  you to  sw itch  on the  headlights  when 
outside  light  conditions  become poor. • 
Warning/indicator  lights 
Overview 
The warning/indicator  lights  indicate  different  functions 
or a possible  malfunction . 
Fig . 7  Instr um ent  cluste r w ith warn in g/ indicato r lig hts 
Your vehicle  is equipped  with  several  important  warning  and ind i
ca tor  lights  to  he lp you  moni to r the  continued  re liable  operat ion of 
your  vehicle =>& . 
AIR 
BAG 
Electronic  power  control => page 14 
Elect ronic Stabilization  Program  (ESP) => page  14 
USA models: ~page  14 
Airbag system  
![AUDI S6 2011  Owners Manual Instruments  and  warning /indicator  lights 
(I] Tip s 
Many fun ct ions  a re mon itored  by the  Auto-Check  system=> page 24. 
Malfunctions  or  faults  will  be  identified  either  with  a  red  AUDI S6 2011  Owners Manual Instruments  and  warning /indicator  lights 
(I] Tip s 
Many fun ct ions  a re mon itored  by the  Auto-Check  system=> page 24. 
Malfunctions  or  faults  will  be  identified  either  with  a  red](/manual-img/6/57593/w960_57593-15.png)
Instruments  and  warning /indicator  lights 
(I] Tip s 
Many fun ct ions  a re mon itored  by the  Auto-Check  system=> page 24. 
Malfunctions  or  faults  will  be  identified  either  with  a  red  symbol 
(pr iority 
1-Dange r!) or w ith  a ye llow symbo l (prio rity 2  -Warn ing). • 
Electronic  power  control C 
This warning/indicator  light  monitors  the  electronic 
power  control. 
The  warn ing/indicator  light  (Electro nic Power  Control)  illumi-
nates  when  you  turn  on  the  ignition  as  a function  check . 
(I] Tips 
If  this  warning/indicator  light  illuminates  while  you  are  driving,  then 
there  is a malfunct io n  in the  engine  electron ics . Have the  ma lfunct io n 
corrected  as  soon  as  possib le  by your  authori zed  Audi  dealer  or  qual
ified  repair  fac ility. • 
Electronic  stabilization  program  (ESP)  •.. 
This warning/indicator  light  monitors  the  electronic 
stabilization  program. 
T he  warn ing/indicator  lig ht  has  the  follow ing  funct ions: 
•  It  blinks  while  you  are  driving  when  the  ESP is working. 
•  It  illumina tes  when  you  sw itch  on  the  ignition  fo r approximately  2 
seconds  as  a function  check . 
•  It  illuminates  whe n there  is  a  malfunction  in the  ESP . 
• It illuminates  when  ESP or  ASR (Ant i-Slip  Regula tion)  is  deacti
vated . 
•  It  ill umina tes  if t he re  is a  malfunction  in the  A BS, s ince  the  ESP  is 
part  of  the  ABS system.  If  the  battery  terminals  were  disconnected  and  re-connected,  the 
vehicle  was  jump  st arted  o r th e  bat tery  is very  weak,  t he  ESP se nsor 
system  goes  through  a  learning  process  for  the  first  few  yards.  The 
warning/indicator  light  illuminates.  The war ning/indicator  light  goes 
out  as  soo n as  the  learning  process  is  complete . 
If  the  ESP warning/indicator  light  ill uminates  and  stays  on  after  yo u 
have  sta rted  t he engine,  t his may  mean  that  the  co ntrol  system  has 
temporarily  switched  off  the  ESP . If  this  is  case , you  can  react ivate 
t he  ESP  by tu rning  the  igni tion  off  and  t hen  o n ag ain . The 
warning/indica tor  light  should  go  out  to  show  that  the  system  is fully 
functional  again. 
For more  information  about  the  ESP=> 
page 242.  • 
Airbag  system 
~i (USA  models) l!.!r (Canada  models) 
This warning/indica tor ligh t monitors  the  airbag  and  the 
pretensioner  systems. 
The G>! (USA models)/ !.!r (Canada  mode ls)  warn ing  light  illuminates 
fo r a  few  seconds  ea ch time  yo u sw itch  on  the  ignitio n. 
If the 
G>! (USA models)/ !.!r (Canada  mode ls) warn ing  light  does  not  go 
out,  or  if it  illuminates  while  you  are  driving,  or  if it  starts  to  blink, 
then  there  is a  malfunction  somewhere  in the  system . If  the  light 
does  not  illuminate  when  yo u switch  on  the  ignition,  this  a lso  means 
there  is a  malfunction. 
& WARNING 
If you  have  a  malfunction  in th e airbag  syst em,  contact  your 
authorized  Audi deale r immediately . Otherwi se the  airbag  or the 
belt  pr eten sion er may  not  work  properly  in an accid ent .•  

Instruments  and  warning /indicator  lights 
Adaptive  Air  Suspension 
~ 
This  warning/indicator  light  has  the  following  functions : 
•  It  illuminates  for  a few  seconds  after  the  ignition  is t urned  on  as 
function  check  and  then  goes  out . 
•  If  the  warn ing/ind icator  light  illuminates  or  blinks  continuously, 
there  is a system  fault  in the  Adaptive  Air Suspension . A system  fault 
can  result  in limited  r ide  comfort  and 
lo w  gro un d  cle arance. Drive 
safely  to  the  nearest  authorized  Audi  dealer  or  qualified  workshop, 
and  have  the  fault  corrected . 
•  If  the  warning/indicator  light  flashes,  you  should  not  drive  the 
vehicle . The  flashing  warning/indicator  light  po ints  to  an  extreme 
High  level.  A very 
pronounced  lifting of  the  vehicle  (extreme  High 
level)  can  resu lt,  for  example,  when  a heavy  load  is removed  from  the 
vehicle . As soon  as  the  level  has  returned  to  normal,  the 
warning/indicator  light  stops  flashing,  and  you  can  drive  away. 
•  If  the  warning/ind icator  light  flashes  in conjunction  with  the 
a, 
warning/ indicator  light,  you shou ld not  drive  off  immediately  in order 
to  prevent  damage  to  the  underbody . The  two  warn ing/indicator 
lights  flashing  together  points  to  an  extreme  Low level.  A 
very 
pronounced  lowering of  the  vehicle  (extreme  Low leve l)  can  result, 
for  examp le,  from  a  heavy  load.  As soon  as  the  leve l has  returned  to 
normal , the  warning/ indicator  lights  stop  flash ing,  and  you  can  drive 
away. 
0 Note 
If  the  warning/indicator  light  flashes  in conjunction  with  the a, 
warning/indicator  light,  you  should  not  drive  the  vehicle  because  low 
lying  vehicle  parts  can  bottom  ou t as  you  drive  over  uneven  ground 
and  be  damaged  as  a  result. • 
Adaptive  Air  Suspension c.:) 
This wa rning/indicator  light  has  the  following  functions : • 
It  illuminates  for  a few  seconds  after  the  ignition  is turned  on  as 
fu nction  check  and  then  goes  out. 
•  It  comes  on  for  approximately  15  seconds  as  a warning  of 
redu ced 
gr oun d clea ra nc e, 
if the  dynamic  mode  is activated  and  if the  ignition 
is switched  on  => 
page  169, "Chassis  controls" . 
•  If  the  warning/indicator  light  flashes  in conjunction  with  the 
warning/indicator  light,  you  shou ld not  drive  the  vehicle  immed iate ly 
in  orde r to  prevent  damage  to  the  underbody.  The  two  wa rning/indi
cator  lights  flashing  together  points  to  an  extreme  Low level.  A very 
pronounced  lowering of  the  veh icle  (extreme  Low  leve l)  can  res ult, 
for  example,  from  a  heavy  load . As soon  as  the  level  has  returned  to 
normal,  the  warning/indicator  lights  stop  flashing,  and  you  can  drive 
away. 
0 Note 
If  the  wa rning/ind icator  light  flashes  in conjunction  with  the 
warning/indicator  light,  you  should  not  drive  the  vehicle  because  low 
lying  vehicle  parts  can  bottom  out  as  you  drive  over  uneven  ground 
and  be  damaged  as  a  result. • 
High  beam ~D 
The ~D warning/indicator  light  illuminates  when  the  high  beams  are 
on  or whe n you  use  the  headlight  flasher.  Fo r more  informat ion  about 
using  the  high  beams,  see=> 
page  62.  • 
Cruise  control 
CRUISE (USA  models) /(lJ1 (Canada  models) 
The  warning/indicator  light  illuminates  when  the  cruise  control  is 
activated .•  

Anti-lock  brake  system  (ABS) 
A ... 
.j {USA  models)  /...,  {Canada  models) 
This warning/indicator  light  monitors  the  ABS  and  the 
electronic  differential  lock  (EDL) . 
The warning/indicator  light  will  come  on for  a few  seconds when  the 
ign ition  is switched  on . The light  w ill  go out  after  an a utomat ic check 
sequence  is comp leted . 
There  is  a  malfunction  in  the  ABS  when:  •  Th e warn ing/ indic ator  light  does  not  ill uminate  when  you  swi tch 
on the  ig nit io n. 
•  Th e warn ing/ in dic ator  lig ht  does  not  go out  a fter  a few se conds . 
•  The warning/ind icator  light  illuminates  while  d riving. 
The  brake  sy stem  will  still  re spond  even without  the  a ssistance of 
the  ABS system . See your  authorized  Audi  dealer  as soon as 
possible to  restore  full  braking  performance. 
For more  i nformat ion 
regarding  the  ABS=> 
page  246. 
The ABS warning  l ight  and  the  brake warning  light  come  on 
together.  The ABS will  not  work  and you will  noti ce a change  in 
brak ing  response and  performance. 
Malfunction  in  the  brake  system 
If the  brake warning  light=> page  18 and the  ABS warning  ill uminate 
together there  may  be a malfu nction  in t he A BS, a nd there  may a lso 
be a malfunction  in the  brake  system  itself=>& . 
In  the even t of  a 
malfunction  in the  b rake system the warning/ indi 
ca tor  light 
BRAKE (U SA  mode ls)/ ((]))  (Canada models)  in the  instrume nt 
cl uster  flashes . By p ressing  the 
I C H ECK ) button,  you  ca n bring  up a 
dr iver message w hic h explains  the  malfunc tion  in mo re de tail.  Please 
not e=> 
pag e 26 . 
Controls  and  equip 
ment  Safety  first 
Instruments  and  warning
/indicator  lights 
Malfunction  in  the  electroni c differential  lock  (EDL) 
Th e ED L wor ks  toge ther w it h  the  ABS . The A BS wa rning  light  will 
come  on  if t he re is a malfunction  in the  EDL  system=> 
page  243. See 
your  authorized  Aud i dea le r  as soon  as poss ible. 
& WARNING 
•  If  the  ... Is~ (USA models)/ d (Canada  models ) warning  light 
does not  go out , o r if  it  comes on while  driving,  the  ABS system  is 
not  working  properly . The vehicle  can then  be stopped  only  with 
the  standard  brakes  (without  ABS ). You w ill  not  have the  protec
tion  ABS provide s. Contact  your  Aud i dealer  as soon as pos sible. 
• USA models: If the BRAKE warning  light  and  the  9 warning 
light  come on together,  the  rear wheel s could lock  up fir st  under 
hard  braking.  Rear wheel  lock-up  can cau se los s of vehicle  control 
and  an  accident . Have your  vehicle  repaired  immediately  by you r 
authorized  Audi  dealer  or a qualified  work shop.  Drive  slowly  and 
avoid  sudden,  hard  brake  applications. 
•  Canada  models : If  the  brake  warning  light «D> and  the  ABS 
warning  light  come on together , the  rear wheels  could lock up 
first  under  hard  braking . Rear wheel  lock -up can cause loss of 
vehicle  control  and  an  accident.  Have your  vehicle  repaired  imme
diately  by your  authorized  Audi  dealer  or a qualified  work shop. 
Drive slowly  and  a void  sudden, hard  brake  applications. • 
Electromechanical  parking  brake 
~E {USA  models) /(®) {Canada  models) 
The warning/indicator  light  monit ors the  electromechan
ical parking  brake. 
With  the  parking  bra ke app lied  and the  ignition  turned  o n, t he 
warning/indicator  light  illum inates.  After  the  ign ition  has been 
t u rned 
off, the  wa rni ng/ind icator  light  co nti nu es  to i llumi nate  for 
abou t 30  seconds . If  the  parki ng  brake  is applied  w it h  the  ignition  _,, 
Vehicle  care  Technical data  

Instruments  and  warning/indicator  lights 
tu rned off, the  warning/ind icator  light  illum inates  for  abo ut  30 
s e co nd s. 
Th e warn ing/i ndicator  lig ht  w ill go  out  whe n the  parking  brake  is 
re lease d. 
If  the  w arn ing/ indi ca tor  li ght flas hes c ontinuou sly 
after  applying th e 
park ing  brake,  braking  force  is  not  suffic ient  to  p revent  the  vehicle 
fro m rolling  unin te n ti onally.  Pleas e  note  the  following: 
•  If th e slope  of the  g round  is too  ste ep to  pa rk the  vehicle,  the  addi
tional  drive  message  ap pea rs 
Caution: Vehicle  parked too  steep . 
• In  th e eve nt  of  a pa rk ing  bra ke  malfunc tion,  t he yellow  symbol 
appea rs  in  the  inst rument  cluste r display a nd  the  dr ive r message 
Parking  brake auto  release:  system  fault is  displayed . Have  the 
ma lf u nctio n re paire d as  soo n as  poss ible  by a  qualified  Audi 
dea le rs hi p.• 
Brake  system BRAKE (USA 
models) 
/ {Q)) (Canada  models) 
The  war ning/in dic ator li ght flash es  i f br ake  fluid  le vel is 
low ,  if  t he re  i s  an A BS sys te m  malfu nction  or a pa rking 
b rake  malf unct ion. 
The  lig ht  ill um inates  when  the  ign it io n  is tu rned  on . It goes  out  afte r 
t he  engi ne  has  been  st arted. This  indicat es  tha t the  b ra k e war ning 
light  is functioning  proper ly. 
If the  brake warning  light  does  not  light  up when  the  engine  is 
cranking,  there  may be  a  malfunction  in the  electrical  system.  In 
this  case,  contact  your Audi dealer. 
If  the  b ra ke sys tem  w arning/i nd ic a tor  light  flashes,  there  is a  br ake 
system  malfunction . By press ing  the  [ 
CHECK ] button,  you  can  bring 
up  a  driver  mess age whi ch expl ain s t he  m alfunc tion in  mo re  de ta il 
=>page 26 . 
If  the  ABS fa ils,  t he ABS war ning/ indica to r li ght  (USA 
mod els)/  (Canada  mo dels)  fla shes  toge ther  wi th th e  bra ke syste m 
warni ng/ind icator  light=> &. 
(USA models): 
If the  warning  light BRAKE and  the  wa rnin g  light  illu
m inate  toge ther,  im media tely  con tac t you r author ized  A udi  dealer  or 
qualif ied  workshop  to  have  all  brake  pads  inspected=> 
page 31. 
When  the  ligh t comes  on,  an  a udible  w arnin g  signal  is also  give n. 
& WARNING 
• USA models: If the BRAKE warning  light  and  the r i,~ warning 
light  come  on  together,  the  rear  wheels  could  lock up  first  under 
hard  braking . Rear wheel  lock-up  can  cause  loss  of vehicle  control 
and  an  accident . Have your  vehicle  repaired  immediately  by your 
authorized  Audi dealer  or  a qualified  workshop . Drive slowly  and 
avoid  sudden,  hard  brake  applications. 
•  Canada  models : If the  brake  warning  light (CD) and  the  ABS 
warning light :::; come on together,  the  rear wheels could lock up 
first  under  hard  braking.  Rear wheel  lock -up  can  cause  loss  of 
vehicle  control  and  an  accident.  Have your  vehicle  repaired  imme di ately  by your  authorized  Audi  dealer  or a qualified  workshop . 
Drive slowly  and  avoid  sudden,  hard  brake  applications. 
•  If the  brake  warning/indicator  light  does  not  go out  after  a few 
seconds  and  the  parking  brake  released,  or lights  up while  you  are 
driving,  the  fluid  level in the  brake  fluid  reservoir  is too  low.  If you 
believe  that  it  is safe  to  do  so,  proceed  immediately  at  low  speed 
to  the  nearest  authorized  Audi dealer  or  qualified  repair  facility 
and  have  the  brake  system  inspected. 
•  Always  keep  in m ind that  after  several  brake  applications , you 
will  need  greater  pressure  on the  brake  pedal  to  stop  your  vehicle. 
Do not  rely on strained  brakes  to  respond  with  maximum  stopping 
power  in critical  situations.  You must  allow  for  increased  braking 
distances.  The extra  distance  used  up  by fading  brakes  could  lead 
to  an  accident. •  

Digital  speedometer 
Fig.  11  Display: 
Digital speedomete r 
Current  speed  appears  in the  display.  Speed  is shown  in 1  mph 
measures  (USA models)  or  1  km/h measures  (Canada  models) . 
You can  switch  the display  from  miles  to  kilometers  and vice  versa  via 
the  MMI.  • 
Open  door  or  trunk  lid  warning 
The pictogram  alerts  you  when  doors  or the  rear lid have 
been  left  open. 
Con tro ls  a nd  e quip 
m en t 
Fig . 12  Display:  open 
door  or rear lid 
warning 
Vehicle  OP-eration 
Driver  information  display 
With the ignition  switched  on,  the  open  door or  rear  lid warning  illu
minates  when at least 
one door  or the  hood  or the  trunk  lid  is not 
closed . The  symbol  also  shows  you 
which door(s)  or  lid is  not closed. 
In  the  illustration ~ fig.  12  it  is the  driver's door,  the  left  rear  door 
and  the  rear  lid. As soon  as  all  the  doors,  the  hood,  the  rear  lid and 
the  fuel  filler  cap  are  properly  closed,  the  door  and rear lid warning 
turns  off  and  the  Driver  Information  System  functions  selected  are 
displayed  again. • 
Defective  Light  bulb  warning 
The defective  light  bulb  warning  tells you  when  a  vehicle 
light  bulb  has  become  defective. 
Fig. 13  Display: defec 
tive  light  bulb warning 
The defective  light  bulb warning  monitors  the  function  of the  light 
bulbs. 
If this  symbol  illuminates, a  brake  light,  a turn  signal  (front 
or  rear),  a  headlight,  the  backup light,  a fog  light or  a rear  fog  light 
has  failed . 
& WARNING 
• Light  bulbs  are pressurized  and  could explode while  they are 
being  changed  causing serious personal  injury.  .._ 
Vehicle  care Do-it-yourselt service  iTechnical data  

Driver  m essages  and  yellow  symbols 
If  a y ellow  symbol  appears  in the  display,  a  dr iver  message  is a lso 
displayed  automatically . 
For  example,  the  symbo l appears  in the  display,  ind icating  low 
windshield  washer  flu id  level.  The  following  message  also  appea rs: 
Please  refill  washer  fluid 
Th e  d river  message  d isappears  after  a few  seconds . The  d rive r 
message  can  be  displayed  again  by  briefly  press ing  the 
I CHECK ] 
button.• 
Red  symbols 
A  red  symbol  means  DANGER. 
-Pu ll  off  the  road. 
- Sto p the  veh icle. 
- Turn off t he eng ine. 
Fi g. 1 7  Disp lay: 
e ngine  c oolan t le vel 
warn in g  { priority  1 ) 
- Check th e ma lfu nct ioning  system . Contac t your  au tho-
rized A ud i dea ler  or a qualified  works hop fo r assistance . 
Red symbo ls  indi ca te  a  pr io rit y  1 malfu nction  - D ange r! 
Controls  and  equip 
ment  Safety  first 
Driver  information  display 
With  a  prior
ity  1  malfunction , a  large  symbol  appears  i n the  center 
area  of  the  display :::> fig . 1 7 . When  the symbol  app ears, 
three 
warning  tones  sound  in  s uccession . The  symbol  conti nues  to  bli nk 
until  the  ma lfunction  has  been  repaired. 
If  the re a re 
more  than  one pr io rit y  1 ma lf u nctions,  t he sy mbols 
appear  one  after  the  other  for  about  2  seconds. 
An addi tion al dr iver mes sage  can also  be  displayed  by b rie fly  pressing 
the  [ 
CHECK ] button. 
T he  red  symbols  mean: 
0 
BRAKE 
Al ternator  malf unc tion 
USA models: 
Brake  system  malfunction 
Canada models: 
Bra ke  system  malfu nction 
=:> page  2 6 
=:> page  26 
=:> page  26 
Engine  coolant  level  too  I[:::> page  2 7 
low/engine  coolant  temperature 
too  high 
c:e::,, Engine  oil  press ure  too  low 
Faulty  steering 
Faulty  ignit ion  sw itch 
(I] Tips 
=:> page  28 
=:> page  28 
=:> page  29 
•  If  the  wa rning/ind icator  ligh t BRAKE (USA models)/ {(])) (Canada 
mode ls)  in the  instrument  cluster  flashes,  there  is a  b rake  system 
ma lfunction . By p ress ing  t he 
I CHECK] button,  yo u can  br ing  up  a 
dr iver  message  which  exp la ins  the  ma lfunction  in mo re deta il. Please 
no te :::, 
page  26. ~ 
Vehicle  care  Technical  data