2011 AUDI S3 technical data

(]] Tips
• The w indshield wipers are switched off when the ign ition is tu rned
off . Activate the windshield wipers after the ignition is switched back
on by mov ing the w indshield wipe r leve r to any pos ition.
• Worn or dirty windshield w iper blades cause smearing, which can
affect the operat io n of the l ight/rain sensor*. Check t he condi tion of
your windshield wiper b lades regularly.
• The rain sensor is part of the inte rval wiping system . Turning off
the ignition will also deactivate the rain sensor. To reactivate the
sensor, switch off the inte rval wiping funct ion, the n switch it back on
again .
• Applies to veh icles with light/ra in sensor: When the w ipers are
switched on manually and in rain conditions, the automatic head­
lights* turn on~
page 56, "Switching the headlights on and off ·f!: "
or off during the day when the wipers are no longer operating. The
au tomatic headlights* func tion is available in t his case only when the
light switch is in the "AUTO" position~
page 56, fig. 49.
• Make su re the washe r fl ui d reservoir in the eng ine compartment is
topped off before going on a long trip. Look up::::)
page 243 for
check ing and fill ing t he washer conta iner.
• The wipers only operate with the hood completely closed. •
Contro ls a nd e quip ­
m en t Vehicle
OP-eration
Clear vision
Rear window wiper cs;J
The wiper lever is also used to operate the rear windo w
w iper and the automatic wiper/ washer function .
Fig . 63 Wi per lev er:
a ct iva ting the rear
w indow wi per an d
w ashe r
The rear window w iper and t he au tomatic wiper/washer func­
tions are activated as follows:
Intermittent wiping
- P ush the wipe r lever forward towards the dashboard and
to the
first position ©~ fig. 63 . T he rear window wiper
w ill wipe the win dow approx. every four seco nds.
Automatic wiper/washer function
- Push the wiper lever forward to the second stop, position
0 , and ho ld it there for as long as you want the rear
wiper/washer to operate.
- Release the lever aga in. T he wiper w ill keep run ning for
app rox . four seco nds .
Switching intermittent wiper action off
- Pull the lever a ll the way back to the original posi tion.
Vehicle care Do-it-yourselt service iTechnical data

Replacing front wiper blades
Wiper blades in good condition help keep the windshield
clear .
Removing the wiper blade
Fig. 6 4 Un lat chin g
wi per bla des
F ig . 65 Removi ng
wip er b lad es
- Move the wipers to the service position~ page 68.
-Fold the windshield wiper arm away from the glass .
- On the uppe r end of the wiper arm at the corrugat ion ,
squeeze the plastic retainer together on both sides in the
direction of the arrow~ fig . 64.
- Rotate the wiper blade in the direction of the arrow @
~ fig. 65 away from the w ip er arm.
Con tro ls a nd e quip ­
m en t Vehicle
OP-eration
Clear vision
- Lift the wiper b lade off in t he direction of the arrow @.
Attaching the wiper blade
- Place the ro unded end of the wiper onto the end of the
wiper arm i n the
opposite direction to the arrow @
~ fig. 65.
- Swing the w iper in the
opposite direction to the arrow@
onto the wiper arm .
- Squeeze the corr ugation o n the wiper until you hear it click
in the wiper arm .
- Fold the wiper arm back o nto t he windshie ld .
- Switch the ignit ion on and move t he wiper lever down
briefly . The wiper will move back to the park posi tion .
The front wiper blades measure lef t side 23 .20 in . ( 590 mm) and
right s ide 18.50 in . (470 mm) in length ,
Clean yo ur wipe r blades regularly with a windshie ld washer so lu tion
to prevent st reaking. If the blades are very dirty, for example with
insec ts, caref ully clean the blades with a spo nge or a sof t brush .
I f the w iper blades begin to streak the windshield, this could be
caused by residue left on the windsh ie ld by automatic car washes.
Fill the windsh ie ld washe r con taine r with a spec ial solu tion ava ilab le
at your authori zed Audi dealer to remove the residue .
Be sure to inspe ct the cond it io n of your w iper blades regu larly . F or
safety reasons, replace your wiper b lades once or twice a year if
necessary. See your authorized Audi dealer for replacement blades.
& WARNING
• Clean your wiper blades regularl y with a wind shield wa sher
solut ion to pre vent streaking. If the wiper blades are very dirty , .,,_
Vehicle care Do-it-yourselt service iTechnical data

& WARNIN G (con tin ue d)
• For s afety rea son s, the wind shi eld wiper blade s should b e
replac ed once or t wice a year .•
Digital compass
Ap plies to veh icle s: wit h dig ital c ompa ss
Activating or deactivating the compass
The direction is displayed on the interior rear view mirror .
Fig. 67 I nside re ar
vie w m irro r: d ig ital
compa ss activa ted
To activate or deactivate, hold the @button down until
the red display appears or disappears .
The digital compass only works with the ignition turned on . The direc­
tions are d isplayed as initials :
N (North), NE (Northeast), E (E ast), S E
(So utheast), S (So uth), SW (Southwest), W (West), NW (Northwest).
[ i J Tips
T o avoid inaccurate directions , do not a llow any remote controls,
electrical system s, or metal parts close to the m irro r.•
Con tro ls a nd e quip ­
m en t Vehicle
OP-eration
Clear vision
App lies to veh icles : w ith dig ita l compass
Setting the magnetic deflection zone
The correct magnetic deflection zone must be set in order
to display the directions correctly .
,_ ,_..;,r .. _ I I
I I
I I
I ' I I
I I
1 ! ©
l 4
l
l
I ' I ,,
l ----
'
'
'
®
\, ,, ...... ,.,. -------
©
@
Fig . 68 North America : ma gnetic d efle ct io n zo ne boun dari es
-Hold the@=> fig . 67 button down until the number of
the set magnetic deflection zone appears on the interior
. . rear view mirro r.
- Adjust the magnetic deflection zone by repeatedly pressing on the@ button . T he set mode automatically
deactivates after a few seconds. •
Vehicle care Do-it-yourselt service iTechnical data

Seats and storage
General recommendations
Why is your seat adjustment so important?
The safety belts and the airbag system can only provide
maximum protection if the front seats are correctly
adju sted.
Th ere are several dif ferent ways you can ad just the d river's sea t and
t he front passenger's seat so that it confo rms to your body size .
It is
especially important t hat the seat be adjusted properly so that:
• you can easily and quickly reach a ll the switc hes and contro ls in the
ins trumen t pa nel
• your body is properly supported thus reducing phys ica l stress and
fatigue
• the safety be lts and airbag system can offer maximum protection
=>
page 145
In the follow ing chapters, you will see exactly how you can best adjust
your sea ts .
Th ere are special regulations a nd instr uctions for install ing a child
safety seat on the front passenger 's seat. Always heed the informa ­
tion regarding child safety p rovided in=>
page 167, "Child Safety ".
& WARNING
Incorrect seating posit ion of the driver and all other passengers
can result in seriou s personal injury.
• Always keep your feet on the floor when the vehicle is in
motion -never put your feet on top of the instrument panel, out
of the window or on top of the seat cushion! This applies especially
to the passengers. If your seating po sition is incorrect you
increase the ri sk of injury in the case of sudden braking or an acci-
Controls and equip ­
ment Safety first
Seats and storage
& WARNING
(con tinu ed)
dent . If the airbag inflates and the seating position is incorrect
this could result in per sonal injury or even death .
• It is important for both the dri ver and front passenger to keep
a distance of at least 10 inches (25 cm) between themselves and
the steer ing whee l and /or instrument panel. If you're sitting any
closer than this , the airbag system cannot protect you properly. In
addition to thi s, the front seats and head restraints must be
adjusted to your body height so that they can give you maximum
protection .
• Always try to keep as much distance as possible between your­
self and the steering wheel or instrument panel.
• Do not adjust the driver's or front passenger 's seat while the
vehicle is moving. Your seat may move unexpectedly, causing
sudden loss of vehicle control and personal injury . If you adjust
your seat while the vehicle is moving, you are out of position. •
Driver's seat
The correc t sea t posi tion is import an t f or sa fe and
rel axed dri ving.
We recomm end that you a djust th e d rive r's sea t in the
fo llowing man ner:
- Ad just the sea t in f ore and a ft dire ct io n so that y ou can
e asily pus h the pe dals to the floor while keep in g you r
kne es slightly bent=>
& in "W hy is yo ur seat a djust m en t
so imp ort an t?".
- Adj ust the sea tbac k so tha t when yo u sit wi th y our back
agai nst the se atba ck, you can sti ll gra sp th e to p of t he
s te er ing w hee l. _..
Vehicle care Technical data

Moving the front seats forward or backward
-Lift the lever => page 74, fig. 69 (D and slide the seat to
the desired posi tion.
- Release the lever and then move the seat f urther until you
feel and hear it engage.
Adjusting the seat height
- Pull th e le ver @up and pu mp i t to raise th e seat .
-Push the lev er down and pum p i t to lo wer the sea t.
Adjusting the seatback angle
- Lean forwa rd to take yo ur weight off the seatback.
Tur n th e ha nd whee l© in the direc tio n you want the seat ­
back to til t.
& WARNING
• Never adju st the driver's or front passenger's seat while the
vehicle is mov ing . If you do this while the veh icle is moving , you
will be out of po sition. Always adjust the driver's or front
passenge r's seat when the vehicle is not moving .
• Be careful when adjusting the seat height . Check to see that no
one is in the way , or serious injury could result!
• To reduce the risk of in jury in the case of sudden braking or
accident , front passengers must never ride in a moving vehicle
with the seatba ck reclined. Safety belt s and the airbag system
only offer max imum protection when the seatback is upright and
the safety belt s are properly positioned on the body . The more the
s e atback is reclined, the greater the risk of personal injury from an
incorrect seating po sition and improperly positioned safety
belts! •
Con tro ls a nd e quip ­
m en t Vehicle
OP-eration
Seats and storage
Adjusting the power seat
Applies to veh icl es: w it h po we r dri ve r se at
Adjustment switches
For an intuitive operation, the switches ©and ® are
distinctly sha ped and position ed to reflect their adjust ­
ment functions.
Fig. 7 0 Adj ustm ent
s wit ches: l ocati ons on
d rive r's s eat
Push or pull e ithe r swi tch in e xa ct ly the s ame d irec tion you like the
co rrespo nding part o f the seat to move .
@ Moving the seat fo rward o r backwa rd
@ Adjusting the angle of the seatback and head restraints
© Adjusting the lumbar support •
Vehicle care Do-it-yourselt service iTechnical data

& WARNING
• Never adjust the seatback while the vehicle is moving. If you
adjust your seatback while the vehicle is moving, you will be out
of position. Always adjust the seatback when the vehicle is not
moving.
• To reduce the risk of injury
in the case of sudden braking or
accident, front passengers must never ride in a moving vehicle
with the seatback reclined. Safety belts and the airbag system
only offer maximum protection when the seatback is upright and
the safety belts are properly positioned on the body. The more the seat back is reclined, the greater the risk of personal injury from an
incorrect seating position and improperly positioned safety
belts! •
App lies to vehicle s: w ith lumba r suppor t
Adjusting the lumbar support
The lumbar support can be adjusted to fit the natural
curvature of the occupant's spine.
~
--ct
L--------------- --,ll:
Adjusting the curvature
Fig. 73 Driver seat:
switch for lumbar
adjustment
- Push the front of the switch plate==> fig. 73 in order to
increase the curvature.
Con tro ls an d equip ­
m en t Vehicle OP-eration
Seats and storage
-Push the rear of the switch plate in order to decrease the
curvature.
Adjusting the height
- Push on the top of the switch plate in order to move the
support higher.
- Push on the bottom of the switch plate in order to move
the support lower.
& WARNING
Never adjust the lumbar support while the vehicle is moving. If
you adjust your seat while the vehicle is moving, you will be out of
position. Always adjust the lumbar support when the vehicle is
not moving. •
Head restraints
Front head restraints
The head restraints must be properly adjusted to the
occupants's height to provide optimal restraint in combi­
nation with the seat restraints.
-
Vehicle care
Fig. 74 Driver's seat
head restra int:
adjusting the height ...
Do-it-yourselt service iTechnical data

Adjusting the head restraints
-To move the head restraint up, hold it at the sides with
both hands and slide it upward until you feel it click into
place.
- To move the head restraint down, press the button@
=>
page 78, fig . 75 and slide the head restraint downward.
Removing the head restraints2>
- Fold the backrest forward=> page 81.
-Move the head restraint upward as far as it can go.
- Press the release@=>
page 78, fig. 76 with the screw-
driver=>
page 2 70 and the button@=> page 78, fig. 75.
Pull the head restraint out of the backrest at the same
time=> &.
Installing the head restraints
Slide the posts on the head restraint down into the guides
until you feel the posts click into place.
- Press the button@=>
page 78, fig. 75 and slide the head
restraint all the way down. You should not be able to pull
the head restraint out of the backrest.
So that the driver can have a better view to the rear, the head
restraints should be pushed down completely when the rear seats are
not occupied.
& WARNING
• Only remove the rear seat head restraints when necessary in
order to install a child seat. Install the head restraint again imme-
2 l The head restraints cannot be removed from rear seats with fixed backrests.
Control s and equ ip­
m ent Vehicle
OP-eration
Seats and storage
& WARNING (continued)
diately once the child seat is removed. Driving without head
restraints or with head restraints that are not properly adjusted
increases the risk of serious or fatal neck injury dramatically.
• Read and heed all WARNINGS~
page 128.
[I) Tips
Correctly adjusted head restraints and safety belts are an extremely
effective combination of safety features. •
Center armrest
The front center armrest can be adjusted to several posi­
tions and contains a storage bin.
Adjusting the armrest
- Push the armrest down .
Fig. 77 Between the
front seats: armrest
folded down
-Lift the armrest slowly until it is in a comfortable position.
Opening the storage bin
- Pull the release button =>fig. 77 upward.
Vehicle care Do-it-yourselt service iTechnical data

Luggage compartment
Increasing the size of the luggage
compartment
To increase the size of the luggage compartment, both
parts of the seatback can be folded forward, individually
or together.
Folding the seatback forward
U')
"'
"' 0 a. ., CD
Fig. 79 Release lever
for the seatback (left
side)
Fig. 80 Rear seatback
folded forward (with
pass-through*)
- Let the backrest latch into the lowest position.
- Swing the outer rear head restraints forward=:>
page 78,
fig. 75.
Con tro ls a nd e quip ­
m en t Vehicle
OP-eration
Seats and storage
-Push the release lever=:> fig. 79 @in the direction of the
arrow.
- Tilt the seatback forward.
Raising the seatback
- Raise the seatback until it is securely latched=:>& . When
you can no longer see the red mark on the pin@, the seat
is latched.
Stowing luggage
- For safe loading and securing of items read and follow the
guidelines on=:>
page 131, "Loading the luggage
compartment" .
The rear seatback is divided into two segments-one third/two thirds.
You can fold down either or both parts of the seatback.
& WARNING
• The backrest must always be securely latched so that the safety
belt of the center seating position can work properly to help
protect the occupant.
• The backrest must be securely latched in position so that no
items contained in the luggage compartment can slide forward
upon sudden braking.
• Never allow safety belts to become damaged by being caught
in door or seat hardware.
• Torn or frayed safety belts can tear and damaged belt hardware
can break in a crash. Inspect the belts periodically. Belts showing
damage to webbing, bindings, buckles, or retractors must be
replaced.
~
Vehicle care Do-it-yourselt service iTechnical data