2011 AUDI S3 ECO mode

Transmission -_____________ _.;..____;_~~
-With your ri ght foot, step on the accelerator to the wi de­
open t hrottle positio n or Kickdown . The engine speed
settles at about
3,200 rpm.
- Take your left foot o ff the brake.
& WARNING
• Always adapt your driving to the traffic flow.
• Only use Launch Control when road and traffic condition s allow
it and other dri ver s will n ot be endangered or annoyed by your
driving and the acceleration of the vehicle.
• Make sure that ESP remains enabled . With the ESP disabled,
the vehicle could brake awa y, particula rly on a slick and slippery
road -risk of skidding!
• Once a cceleration i s fin ished , switch ASR on again by briefl y
pushing the ESP button. •
Applie s to v ehic le s: wit h S tron ic ®
Back-up program
In the event of a system malfunction, there is an back -up
program.
I n the even t of system ma lfunct ion, the automati c transmis sion
switches to the fail-safe mode. All of the se lector lever posit ion
displays fo r the automat ic transmiss ion are hi ghligh ted with a ligh t
background in the instrument cluster display . In some cases you
canno t drive in the reverse gear a ny mo re.
If the transmiss ion sw itc hes to fa il-safe mode, you should take the
vehicle to an authorized Aud i dealership as soon as possible to have
the cond itio n corrected. •
Contro ls a nd e quip ­
m en t Vehicle
OP-eration
Applies to veh icles : w ith S t ron ic ®
Emergency release for selector lever
If the vehicle's power supply fails, the selector lever can
be released in an emergency .
Fig. 120 Selector
le ve r: R em ov e se le ct or
l e ve r sleev e
Fig. 12 1 Selector
l e ve r: em ergen cy
relea se fro m the P ark
p os iti on
The em ergency release m echanism is loca ted on th e right
front u nder the se lector lev er shift gate . The re lease p roc e­
dure requ ires profess ional dext eri ty. We recommend t hat
you seek assis tance.
Removing the selector Lever boot
- Engage the par king bra ke.
Vehicle care Do-it-yourselt service iTechnical data

........ _A_ i_rb _ a_,g,:;._ s_, y'- s_ t_e _m ________________________________________________ _
& WARNING (conti nued)
• Always make sure that the side a irbag can inflate without
interference :
- Never in stall seat covers or replacement uphol stery over the
front seatbacks that have not been specifically approved by
Audi .
- Never use addit ional se at cushions that cover the areas
where the side ai rbags inflate.
- Damage to the or iginal seat covers or to the seam in the area
of the side airbag module must always be repaired immedi­
ately by an author ized Audi dealer.
• The airbag system can be activated only on ce. After an airbag
has inflated, it must be replaced by an authorized Audi dealer or
qualified technician who has the techni cal information, t raining
and special equipment necessary.
• The airbag sy stem can be deploy ed only once. After an airbag
has been dep loyed , it must be replaced with new replacement
parts designed and approved e specially for your Audi model
version. Replacement of complete airbag systems or a irbag
components must be performed by qualified workshops onl y.
Make sure that any airbag service action is entered in your Audi
Warranty
& Maintenance booklet under AIRBAG REPLACEMENT
RECORD .a
Other things that can affect Advanced
Airbag performance
Changing the ve hicle's suspension system can change the way that
t he A dvan ced Airbag Sys tem pe rfo rms in a crash . For examp le, using
tire -rim combinations not approved by Audi, lower ing t he veh icle,
c hang ing the st iffness o f th e suspens ion, including the sp rings,
suspension str uts , shoc k absorbers etc . ca n change the forces tha t
are meas ured by the a irbag sensors and sent to the electronic control
unit. Some suspension changes ca n, for examp le, increase the force levels measured by the senso
rs and make the airbag system deploy in
c ra shes in w hich i t wo uld not deploy if the ch an g es h ad not b een
made . Other ki nds of changes may reduce the force levels meas ured
by the sensors an d prevent the airbag from dep loying when it should .
Th e sensors in t he safety bel t buckle for the drive r and fro nt
passenger seat tell the e lectronic control mo dule if the sa fety belt is
la tch ed o r not. If the safety belt is being u sed, t he fron t airbag w ill
dep loy at a sl ightly h igher rate of vehicle deceleration than if the
s afety belt is not be ing use d. T herefo re, in a pa rticular collis io n, it is
possible that an a irbag w ill not deploy at a seati ng position where the
sa fety belt is being used but w ill inflate at the posit ion where the
safety belt is not be ing used . It is importa nt that nothi ng inte rfere
w ith the safety belt buck les so that t he sensors can send the co rrect
info rmation abou t safety b elt use to t he electron ic co ntro l unit .
& WARNING
Changing the vehicle 's suspension including use of unapproved
tire-rim combinations can change Advanced Airbag performance and increase the risk of serious personal injury in a crash .
• Never install suspension components that do not have the
same performance characteristics as the components originally
installed on your vehicle.
• Never use tire-rim combinations that have not been approved
by Audi.
& WARNING
Item s stored between the safety belt buckle and the center
console can cause the sensors in the buckle to send the wrong
information to the electroni c control module and prevent the
Advanced Airbag System from work ing properly.
• Always make sure that nothing can interfere with the safety
belt buckles and that they are not obstructed . ..,

-----------------------------------------~C~ h~il ~d ~ S~a _!fe ~ t !;YL __
and for the different models of the same kind of child restraint
offered by child restraint manufacturers.
The weight ranges for the individual types, makes and models of ch ild
restraints that the NHTSA has specified in the Safety Standard
together with the weight ranges of typical infants and typical 1 year­
old child have been stored in the control unit of the Advanced Airbag
System. When a child restraint is being used on the front passenger
seat with a typical 1 year-old chi ld, the Advanced Airbag System
compares the weight meas ured by the weight sensing mat with the
information stored in the electronic control unit .
The electronic contro l unit a lso registers the tension on the front
passenger safety belt. The tension on the safety belt for the front
passenger seat will be different for an adult who is properly using the
safety belt as compared to the tension on the belt when it is used to
attach a child restraint to the seat . The sensor below the latch for the
safety belt for the front seat passenger measures the tension on the
belt. The input from this sensor is then used with the weight to
"decide", whether there is a child restraint with a typical 1 year-old
child on the front passenger seat and whether or not the airbag must
be turned off .•
Child restraints and Advanced Airbags
Regardless of the child restraint that you use, ma ke sure that it has
been certified to meet United States Federal Motor Vehicle Safety
Standards and has been ce rtified by its manufacturer for use with an
airbag . Always be sure that the child restraint is properly installed at
one of the rear seating positions. If in exceptional circumstances you
must use it on the front passenger seat, carefully read all of the infor­
mation on ch ild safety and Advanced Airbags and heed all of the
app licab le WARNINGS. Make certain that the child restra int is
correctly recognized by the weight-sensing mat inside the front
passenger seat, that the front passenger airbag is turned off and that
the airbag status is always correctly signaled by the
PASSENGER AIR
BAG OFF
light.
Controls and equip­ ment Safety first Vehicle operation
Many types and models of child restra
ints have been available over
t he years, new models are introduced reg ularly incorpo rating new
and improved designs and older models are taken out of product ion.
Chi ld restraints are not standardized. Child restraints of the same
type typ ically have d ifferent weights and sizes and differe nt 'foot­
prints,' the size and shape of the bottom of the child restraint that
sits on the seat, when they are installed on a vehicle seat . These
differences make it virtually impossib le to certify compliance with
t he requirements for advanced airbags with each and every chil d
restra int that has ever been sold in the past or will be sold over the
course of the useful life of your vehicle.
For this reason, the United States Nationa l Highway Traffic Safety
Administration has published a list of specific type, makes and
mode ls of child restra ints that must be used to cert ify compliance of
the Advanced Airbag System in yo ur vehicle with the suppression
requirements of Federal Motor Veh icle Safety Standard 208. These
child restraints are:
A. Car beds, manufactured on or after September 1,
2004:
• Cosco Dream Ride 02-719
B. Rear facing child restraint systems,
manufactured on or after September 1, 2004:
(When the restraint system comes equipped with a removable base,
compliance has to be cert ified with or without the base) .
• Britax Handle with Care 191
• Century Assura 4553
• Century Smart Fit 4543
• Cosco Arriva 02727
• Evenflo Discovery Adjust Right 212
• Evenflo First Choice 204
• Graco Infant 8457
Vehicle care Do-it-yourself service Technical data

Driving and environment
This is especially true for vehicles with low-slung chassis (sports
chassis) and fully loaded vehicles. •
Operate your vehicle economically
and minimize pollution
General
Your personal style of driving will determine the economy
of your vehicle, as well as exhaust and noise levels.
Fuel economy, env ironmental impact, and wear on your eng ine,
brakes and tires largely depend on three factors:
• your personal driving style
• operat ing conditions
• technical lim itations
If you anticipate what you need to do next and drive economically,
you can easily cut your fuel consumpt ion by 10-15 percent. This
sect ion wi ll g ive you some tips on how you can help the environment
and your pocketbook.
[I) Tips
The consumption estimates as published by ENVIRONMENTAL PROTECTION AGENCY (EPA) and Transport Canada may not co rre­
spond to your actual consumption on the road, which will vary
depending upon vehicle load and speed, road and weather conditions,
trip length, etc. •
Drive smoothl} and keep a lookout ahead
Vehicles use the most fuel when they are accelerating.
Avoid unnecessary accelerating and braking .
Vehicles use the most fuel when they are accelerating. If you antici­
pate what is go ing to happen next, you will need to brake less and,
thus, accelerate less. Let the vehicle coast whenever possible - for example when you see that the next traffic light is red.
Avoid full throttle
Driving at moderate speeds saves fuel and improves your
mileage.
- Try and keep well below your car's maximum speed.
Accelerating gently reduces fuel consumption, engine wear, and does
not d isturb the env ironment.
Fuel consumption, exhaust emissions and engine noise increase
disproportionately at high speeds. If you drive at approximately three
quarters of top speed, fuel consumption will be reduced by one half.
Never drive faster than the posted speed limit and weather condi ­
tions perm it. •
Reducing unnecessary idling
Even when your car is just idling it burns up fuel.
- Shut the engine off when you are not driving the vehicle .
- Do not warm up the vehicle by letting the engine run at idle .
It makes sense to shut off the engine in traffic jams, when waiting for
trains to pass at railroad crossings, or at traffic lights that have long
wa its on red. Turn ing the eng ine off for just 30-40 seconds saves
more fuel than is burned starting the engine again.
It takes a long time for the engine to warm up fully when it is running
at idle. However, wear and noxious emissions are espec ially high
when the engine is warming up . So you shou ld drive away as soon as .,_

IJIII Checking and filling
-------=:---- =------------------------------------
Please be sure to consu lt with your aut horized Aud i dea ler for infor­
m ation and availabili ty of the proper engine oil fo r yo ur vehicle's
diesel engine and fo r the latest technical informat ion .
Beca use t his spec ia l engine o il may not be avai lab le when need it, we
s tr ong ly recommend t hat yo u alw ays car ry with yo u extr a qu art (liter)
of oil that conforms to A ud i oil specificat ion VW 507 00, in case you
have to top off o il wh ile on the road.
& WARNING
Failure to use engine oil for your diesel engine that expressly
conforms to Audi oil specification VW 507 00 can cause engine
failure on the highway that can cau se a cra sh and serious per sonal
injury.
• Never use any amount of engine oil in the diesel engine that
does not conform to Audi oil specification VW 507 00 .
• Always carry with you an extra quart (liter ) of engine oil that
conforms to Audi oil specification VW 507 00
in case you must top
off the oil while on the road .
& WARNING
Improperly stored items can become airborne missiles, flying
through the vehicle causing serious personal injury in the event of
hard braking or an accident. To help reduce the risk of serious
personal injury:
• Always store extra quart (liter ) of engine oil for your diesel
engine in its original oil container that is securely closed in the
luggage compartment. Make sure the container is securely stored
and mounted.
0 Note
• If you use engine oil that does not express ly co nform to A udi o il
spe cifica tion VW 507 00, very ser ious and ve ry expens ive da mage to
your vehicle's eng ine will occ ur. Eng ine damage caused by using the wrong engine oil
is not covered by your New Vehicle Lim ited
W arran ty.
• Not all comme rcia lly available oils conform to t his very rigid Audi
oil qua lity stand ard eve n th ough they may be sy nth et ic -b as ed and
have the same v iscosity .•
Engine cooling system
Coolant
The engine coo lant per forms t wo functions: i t keeps the
engin e fro m ove rhea ting and i t pro tec ts th e engine from
f ree zin g in t he win ter .
The cooling system is sealed and genera lly requ ires little attention.
Th e cooling system has been filled at the factory wit h a permanent
coo lant which does not need to be c hanged. The coolant cons ists of a
mixt ure of water an d the manufacturer's glyco l-basedcoolant ad di­
tive G12 ++ a ntifree ze with a nticorros ion addit ives (50% fo r USA
mode ls; 60% for Canadian models). This mixture both ass ures the
nece ssary frost protec tion and p rotects meta l components in the
eng ine's cooling system from corrosion and scaling. It also raises the
boiling poin t of the co olant.
Do not red uce the co ncent ration of the coolant in the summer by
add ing p la in water.
The proportion of coolant additive must be at
least 50 % but not more than 60%
to ma inta in an tifreeze protectio n
and coo ling efficiency. If the coolant frost protect ion is too low, t he
coo lant co uld free ze and damage t he veh icle h eating and eng ine
coo ling system.
F or ye ar-round drivi ng, an tifr ee ze is add ed at t he fa ctory for tempe r­
atures dow n to:
• - 31°F( -35°C)USA
• -40 °F ( -40 °C) Canada .

-~_T_ i_ re _ s_ a_n _ d_ w_ h _e_ e_ ls _________________________________________________ _
vehicle at its maximum capacity weight and tires that were on your
vehicle at the tim e it was manufactured.
If you wish to improve comfort when operating the vehicle at
normal load (up to 3 occupants) , you can adjust tire pressures to
those specified for normal vehicle load. Before operating the
vehicle at maximum load, you must increase the tire pressures to
those specified for maximum vehicle load
=> &.
Bear in mind that the tire pressure monitoring system* ca n only
monitor the tire pressures you have stored. The system does not
recogn ize the load condit ion of your vehicle.
The effectiveness of the tire pressure monitoring system* wi ll be
impaired if you store normal load pressures but then operate the
vehicle at its maximum load
=> &.
Tire designation
See the illustration => page 249, fig. 171 for the locat ion of the label
either on driver's side B-pillar or inside the fuel filler flap (color of the
actual label and exact location on the vehicle will vary slightly).
Note that the following tab le is accurate at the time of going to press
and is subject to change. In the event of discrepancies, the tire pres­
sure label (on USA vehicles, the tire pressure label is located on
dr iver's side B-pillar ; on Canada vehicles, the tire pressure label is
located either on the driver's side B-p illar or inside the fuel filler flap.)
always takes precedence.
The table below lists the recommended cold tire inflation pressures
for the Audi model covered by your Owner's Literature at the vehicle's
capacity weight and the tire sizes installed on the respective models
as origina l equipment, or as a factory option.
Tire pressure front Tire pressure rear
Engine
(displace­
ment in liter) normal Load
normal Load
condition (up full Load condition (up
full Load
to 3 occu- condition to 3 occu- condition pants) pants)
PSI kPA PSI kPA PSI kPA PSI II kPA
4-cylinder 205/55 R16 91H All Season 36 250 39 270 30 210 38 260
2.0 TFSI
225/45 R17 91W High Performance 35 240
38 260 30 210 36 250
(gasoline)
225/45 R17 94H XL All Season
38 260 39 270 32 220 38 260
225/45 Rl 7 94Y XL High Performance 35 240 36 250 30 210 35 240
225/40 R18 92Y XL High Performance
38 260 41 280
35 240 41
280
Compact spare wheel 1125/70 R18 60 420 60 60 420 60 420

lfflJ,.___T_ ir_e_ s _ a_ n _ d_ w_ h_e_ e_ ls _______________________________________________ _
(j)
®
®
U.S . DOT tire identification number
Audi Orig inal tire
Tire ply composition and materials used
Max imum load rating
Treadwear, traction and temperature grades
@ Maximum permissible inflation pressure
The tires and rims are essential parts of the vehicle's design. The tires
and r ims approved by Audi are spec ially matched to the characteris­
tics of the vehicle and can make a major contribution to good road
holding and safe handling when in good condition and properly
inflated =>& .
We recommend that all work on tires and wheels be performed by an
authorized Audi dealer. They are familiar with recommended proce­
dures and have the necessary special tools and spare parts as well as
the proper facilit ies for disposing of the old tires.
Authorized Audi dea lers have the necessary information about tech­
nical requirements for installing or chang in g ti res and rims.
Replacing tires and wheels
Tires should be replaced at least in pairs and not ind ividually (for
example both front tires or both rear t ires together).
Be sure to read and heed the tir e pressure monitoring system*
information=>
page 264.
Always buy replacement radial tires that have the same specifications
as the tires approved for your veh icle by Audi . Replacement tires must
always have the same load rating specification as the original equip­
ment or approved opt iona l tires listed in the table=>
page 249.
Audi-approved spec ification tires are specially matched to your
vehicle and its load limits, and can contribute to the important road­
holding, driv ing characteristics, and safety of the vehicle. The table (=>
page
249) lists specifications of the tires approved for the Aud i
models covered by your Owner's Literature.
The tire pressure label located either on driver's side B-p illar or inside
the fuel filler flap(=>
page 249, fig. 172) lists the specifications of
the original equipment tires installed on your ve hicle at the time it
was manufactured.
Federal law requires tire manufact urers to place standardized infor­
mation on the sidewall of all tires =>
page 2 5 7, fig. 17 5. This i nfor­
mation identifies and describes the fundamental characteristics, the
quality grade of the tire and also provides a t ire identification number
for safety standard certification and in case of a reca ll.
Tire specifications
Knowledge of tire specificat ions makes it easie r to choose the correct
tires. Rad ial tires have the tire specifications marked on the s idewall,
for examp le:
P225 / 45 R 17 91H XL
This contains the following informat ion:
P I ndicates the tire is for passenger cars (where applicable)
225 Nominal tire width in mm of the tire from s idewall edge to side-
wa ll edge. In gene ral, the large r the number, the wider the tire
45 Height/width ratio in pe rcent (aspect ratio)
R Tire construction: Radial
17 Rim diameter code (in inches)
91 Load rating code
H Speed rating letter code
XL (or "xl", "EXTRA LOAD" or "RF") indicates that the tire is "Rein­
forced" or an "Extra Load" tire
M+S (or "M/S") Indicates that the t ire has some mud and snow capa­
bili ty
The tires could a lso have the information of direction of rotation
=>page 245.

lffllL-_T.:..:..: ir:....:e~ s=---= a~ n:..:..: d:......: w..:....:.. h:....:e~ e= ls=--------------------------------------------------
Low aspect ratio tires
Your Audi is factory-equipped with low aspect ratio tires. These tires
have been thoroughly tested and been selected specifically for your
model for their superb performance, road feel and handling under a
variety of driving conditions. Ask your authorized Aud i dealer for
more details .
Th e low aspect ratio of these tires is indicated by a numeral of
55 or
less
in the tire's size designation . The numeral represents the ratio of
the tire's sidewall height in relation to its tread width expressed in
percentage. Conventional tires have a height/width ratio of 60 or
more.
The performance of low-aspect-ratio tires is particularly sensitive to
improper inflation pressure. It is therefore important that low
aspect ratio tires are inflated to the specified pressure and that the
inflation pressure is regularly checked and maintained. Tire pres­
sures should be checked at least once a month and always before a
long trip~
page 252, "Checking t ire pressure" .
What you can do to avoid tire and rim damage
Low aspect ratio tires can be damaged more easily by impact w ith
potholes, curbs, gullies or ridges on the road, particularly if the tire is
unde rinflated.
In order to minimize the occurrence of impact damage to the tires of
your vehicle , we recomme nd that you observe the following precau ­
tions:
• Always maintain recommended inflation pressures. Check your
tire pressure every 2,000 miles (3,000 km) and add air if necessary.
• Drive ca refully on roads with potholes, deep gullies or ridges. The
impact from driving through or over such obstacles can damage your
tires. Impact with a curb may also cause damage to your tires .
• After any impact, immediately inspect your tires or have them
inspected by the nearest authorized Audi dealer. Replace a damaged
tire as soon as possible. •
Inspect your tires every 2,000 miles (3,000 km) for damage and
wear . Damage is not always easy to see. Damage can lead to loss of
air and underinflat ion, which could eventually cause tire fa ilure . If
you believe that a tire may have been damaged, replace the tire as
soon as poss ible .
• Th ese tires may wear more quickly than others.
• Please a lso remember that, while these tires deliver responsive
hand ling, they may rid e less comfortably and make more noise than
other choices .
Reduced performance in winter/cold season
conditions
All tires are designed for certain purposes. The low aspect ratio, ultra
high performance t ires originally installed on your vehicle are
intended for maximum dry and wet road perfo rmance and handling.
They are not su itable for cold, snowy or icy weather conditions . If you
drive under those circumstances, you should equip yo ur vehicle with
all-season or w inter tires, which offer better traction under those
conditions . We suggest yo u use the recommended snow or all-season
tires specified for your veh icle, or their equivalent .
Refer to =>
page 261 for more detailed information regard ing winter
tires. •
Tire pressure monitoring system
Applies to veh icles : w it h t ire press ure m onito ring syste m
General notes 1
Each tire, including the spare (if prov ided) , shou ld be checked
month ly when cold and inflated to the inflation pressure recom­
mended by the vehicle manufacturer on the vehicle placard or t ire
inf lation pressure label. (If your vehicle has tires of a different size
than the siz e indicated on the vehicle placard or tire inflation pressure
label, you should determine the proper t ire inflation pressure for
those tires.)
~