2011 Acura TSX audio

General Information on the Audio System
Recommended CDs
163
Features
Protecting CDs
Follow these precautions when handling or storing CDs:
Store a CD in its case when it is not being played. t
When wiping a CD, use a soft clean cloth from the center to the outside edge. t
Handle a CD by its edge. Never touch either surface. t
Never insert foreign objects into the CD player. t
Keep CDs out of direct sunlight and extreme heat. t
Do not place stabilizer rings or labels on the CD. t
Avoid fingerprints, liquids, and felt-tip pens on the CD. t
Examples:
,

'
)$ 

 
*%%(+

&
%
,

%
,

%,
!!$
#'&+

% Bubbled/
W$ W&

&$
Sealed W&
%&
 % 
$ &$


&
""
$
 



W$"
'$$% Protecting Discs NOTICE Do not insert a damaged CD. It may be stuck inside
and damage the audio unit.

164Features
General Information on the Audio System
Compatible iPod
® and USB Flash Drives
Compatible iPod
® and USB Flash Drives
iPod
® Model Compatibility
USB Flash DrivesUse a recommended USB flash drive of 256 MB or higher. t
Some digital audio players may not be compatible. t
Some USB flash drives (e.g., a device with security lockout) may not work. t
Some software files may not allow for audio play or text data display. t
Some versions of MP3, WMA, or A AC formats may be unsupported. t
Files on the USB flash drive are played in their stored
order. This order may be different from the order
displayed on your PC or device. USB Flash Drives iPod
® Model Compatibility
This system may not work with all software versions
of these devices.
Model
iPod classic
® (80/160G)
iPod classic ® (120G)
iPod
® with video (iPod
® 5th generation)
iPod nano ®
iPod nano
® 2nd generation
iPod nano ® 3rd generation
iPod nano ® 4th generation
iPod nano ® 5th generation
iPod touch
®
iPod touch
® 2nd generation

167
Continued
Features
Models with navigation system For models with the navigation system, see the Navigation System Manual for how
to operate Bluetooth
® HandsFreeLink
®.
Models without navigation system Bluetooth
® HandsFreeLink
® (HFL) allows you to place and receive phone calls using
your vehicle's audio system, without handling your cell phone.
Using HFL
HFL Buttons Button: Press to give a command or answer a call. Button: Press to end a call, go back to the previous command, or cancel a
command.
Bluetooth
® HandsFreeLink
®
To use HFL, you need a Bluetooth-compatible cell
phone. For a list of compatible phones,
pairing procedures, and special feature
capabilities:
U.S.: Visit t
www.acura.com/handsfreelink, or call
(888) 528-7876.
Canada: Visit
t
www.handsfreelink.ca, or call (888)
528-7876.
Voice control tips:
Aim the vents away from the ceiling and close
tthe windows, as noise coming from them may
interfere with the microphone.
Press and release the t
button before giving
a command. Speak clearly and naturally after a
beep.
If the microphone picks up voices other than
tyours, the command may be misinterpreted.
A command that consists of several words can be tspoken together. For example, say "Call 123-456-
7890" at once.
When HFL is in use, navigation voice commands tcannot be recognized.
To change the volume level, use the audio tsystem's volume knob or the remote audio
controls.
Bluetooth
® HandsFreeLink
®
(HFL Talk) Button (HFL Back) ButtonAudio Remote
VOL (Volume)
ButtonsMicrophone

168Features
Bluetooth
® HandsFreeLink
®
Using HFL
Help FeaturesTo hear general HFL information and help, say "Tutorial." t
Say "Hands free help" or "Help" any time to get help or hear a list of t
commands.
The multi-information display notifies you
when there is an incoming call.
Information Display
Bluetooth
® HandsFreeLink
®
Bluetooth
® Wireless Technology
Bluetooth® name and logos are registered
trademarks owned by Bluetooth SIG, Inc., and any
use of such marks by Honda Motors Co., Ltd., is
under license. Other trademarks and trade names
are those of their respective owners.
HFL Limitations
An incoming call on HFL will interrupt
Bluetooth® Audio when it is playing. Audio will
resume when the call is ended.
Information Display
The information that appears on the multi-
information display varies between phone models. Signal
StrengthHFL Mode Battery
Level
Status
Phone
Number Roam
Status

180Features
Compass
*
Compass Zone Selection
Zone Number
1. Turn the ignition switch to ON
II
.
2. Press and hold the MENU button until the
display shows the compass setting menu
list.
3. Rotate
to select ZONE, then press

. The display shows the current zone
number.
4. Rotate
to select the zone number of
your area (See Zone Map), then press
.
Compass Zone Selection
Compass Zone Selection
The zone selection is done to compensate the
variation between magnetic north and true north.
If the calibration starts while the audio system
is in use, the display returns to normal after the
calibration is completed.
Zone Map
1
2
3
4
5
6
7891011121314 15
Guam Island : Zone 8
Puerto Rico : Zone 11

Battery
268Maintenance
Checking the Battery
Check the battery condition monthly. Look
at the test indicator window and check the
terminals for corrosion.
If your vehicle's battery is disconnected or goes dead:
The audio system is disabled. t
Entering the audio security code

P.14 0
The clock resets. t
Setting the Clock

P. 8 8
The navigation system is disabled. A PIN code will be required. t
Refer to the navigation system manual

Charging the BatteryDisconnect both battery cables to prevent damaging your vehicle's electrical
system. Always disconnect the negative (-) cable first, and reconnect it last.
BatteryWARNING: Battery post, terminals, and
related accessories contain lead and lead
compounds.
Wash your hands after handling.The test indicator's color information is on the
battery.
When you find corrosion, clean the battery terminals
by applying a baking powder and water solution.
Rinse the terminals with water. Cloth/towel dry
the battery. Coat the terminals with grease to help
prevent future corrosion.
WARNING
The battery gives off explosive hydrogen
gas during normal operation.
A spark or flame can cause the battery
to explode with enough force to kill or
seriously hurt you.
Wear protective clothing and a face
shield, or have a skilled technician do any
battery maintenance.
Test Indicator Window

271
Cleaning
Continued
Maintenance
Use a damp cloth with a mixture of mild detergent and warm water to remove
dirt. Use a clean cloth to remove detergent residue.
Cleaning Seat Belts
Use a soft brush with a mixture of mild soap and warm water to clean the seat
belts. Let the belts air dry. Wipe the openings of the seat belt anchors using a
clean cloth.
Interior Care
Do not spill liquids inside the vehicle.
Electrical devices and systems may malfunction if
liquids are splashed on them.
Do not use silicone based sprays on electrical
devices such as audio devices and switches.
Doing so may cause the items to malfunction or a
fire inside the vehicle.
If a silicone based spray is inadvertently used on
electrical devices, consult a dealer.
Depending on their composition, chemicals and
liquid aromatics may cause discoloration, wrinkles,
and cracking to resin-based parts and textiles.
Do not use alkali solvents or organic solvents such
as benzene or gasoline.
After using chemicals, make sure to gently wipe
them off using a dry cloth.
Do not place used cloths on top of resin based parts
or textiles for long periods of time without washing.
Interior Care
Opening

Jump Starting
284Handling the Unexpected
Jump Starting Procedure
Turn off the power to electric devices, such as audio and lights. Turn off the
engine, then open the hood.
Jump Starting
6-cylinder models 1. Slide out the battery terminal cover. All models 2. Connect the first jumper cable to your
vehicle's battery
terminal.
3. Connect the other end of the first jumper
cable to the assisting vehicle's
terminal.
Use a 12-volt booster battery only.
4. Connect the second jumper cable to the
assisting vehicle's
terminal.
WARNING
A battery can explode if you do not follow
the correct procedure, seriously injuring
anyone nearby.
Keep all sparks, open flames, and smoking
materials away from the battery.Securely attach the jumper cables clips so that they
do not come off when the engine vibrates. Also be
careful not to tangle the jumper cables or allow the
cable ends to touch each other while attaching or
detaching the jumper cables.
4-cylinder models 6-cylinder models Booster Battery
Cover