Page 219 of 324

Fuel Economy
218Driving
Improving Fuel EconomyFuel economy depends on several conditions, including driving conditions, your
driving habits, the condition of your vehicle, and loading. Depending on these
and other conditions, you may or may not achieve the rated fuel economy of this
vehicle.
Improving Fuel Economy
Direct calculation is the recommended method to
determine actual fuel consumed while driving.
In Canada, posted fuel economy numbers are
established following a simulated test. For more
information on how this test is performed, please
visit http://oee.nrcan.gc.ca/Miles driven
Gallons of
fuel
Miles per
Gallon
100
Liter
Kilometers
L per 100 km
Maintenance and Fuel Economy
You can optimize your fuel economy with proper maintenance of your vehicle.
Always maintain your vehicle in accordance with the messages displayed on the
multi-information display.
Use the recommended viscosity engine oil, displaying the API Certification Seal. t
Maintain the specified tire pressure. t
Do not load the vehicle with excess cargo. t
Keep your vehicle clean. A buildup of snow or mud on your vehicle's underside t
adds weight and increases wind resistance.
Page 261 of 324

Checking and Maintaining Tires
Tire and Loading Information Label
260Maintenance
Tire and Loading Information LabelThe label attached to the driver’s doorjamb provides necessary tire and
loading information.
124
3
Label
Example
Tire SizeFollowing is an example of tire size with
an explanation of what each component
means.
P225/50 R17 93V
P: Vehicle type (P indicates passenger
vehicle).
225: Tire width in millimeters.
50: Aspect ratio (the tire’s section height
as a percentage of its width).
R: Tire construction code (R indicates
radial).
17: Rim diameter in inches.
93: Load index (a numerical code
associated with the maximum load the
tire can carry).
V: Speed symbol (an alphabetical code
indicating the maximum speed rating).
Tire Labeling
The tires that came on your vehicle have
a number of markings. Those you should
be aware of are described below.
Tire Size
Whenever tires are replaced, they should be replaced with tires of the
same size.
Tire and Loading Information LabelThe tire and loading information label
attached to the driver’s doorjamb
contains:1 The number of people your vehicle can
carry.2 The total weight your vehicle can carry.
Do not exceed this weight.3 The original tire sizes for front, rear and
spare.4 The proper cold tire pressure for front,
rear and spare.
Page 273 of 324

Cleaning
Interior Care
272Maintenance
Maintaining Genuine Leather
*
Vacuum dirt and dust from the leather frequently. Pay close attention to the pleats
and seams. Clean the leather with a soft cloth dampened with a 90% water and
10% neutral soap solution. Then buff it with a clean, dry cloth. Remove any dust
or dirt on leather surfaces immediately.
Floor Mats
If you use any floor mats that were not originally
provided with your vehicle, make sure they are
designed for your specific vehicle, fit correctly, and
are securely anchored by the floor anchors.
Position the rear seat floor mats properly. If they
are not, the floor mat can interfere with the front
passenger seat's weight sensors.
Floor Mats
The front floor mats hook over the floor
anchors, which keep the mats from sliding
forward. To remove a mat for cleaning, turn
the anchor knobs to the unlock position.
When reinstalling the mat after cleaning, turn
the knobs to the lock position.
Do not put additional floor mats on top
of the anchored mats.
* Not available on all models
Driver's floor mat is shown.To unlock
Page 281 of 324

If a Tire Goes Flat
Changing a Flat Tire
280Handling the Unexpected
WARNING
The vehicle can easily roll off the jack,
seriously injuring anyone underneath.
Follow the directions for changing a tire
exactly, and never get under the vehicle
when it is supported only by the jack.
How to Set Up the Jack
How to Set Up the Jack
Do not use the jack with people or luggage in the
vehicle.
Use the jack provided in your vehicle.
Other jacks may not support the weight
("load") or
their shape may not match.
The following instructions must be followed to use
the jack safely.
Do not use while the engine is running. tUse only where the ground is firm and level. tUse only at the jacking points. tDo not get in the vehicle while using the jack. tDo not put anything on top of or underneath the tjack.
1. Place the jack under the jacking point
closest to the tire to be changed.
2. Turn the end bracket (as shown in the
image) clockwise until the top of the jack
contacts the jacking point.
Make sure that the jacking point tab is
resting in the jack notch.
3. Raise the vehicle, using the extension bar
and the jack handle, until the tire is off the
ground.
Extension Bar
Wheel Nut
Wrench as Jack
Handle
Page 299 of 324
Emergency Towing
298Handling the Unexpected
Call a professional towing service if you need to tow your vehicle.
Flat bed equipment
The operator loads your vehicle on the back of a truck.
This is the best way to transport your vehicle. Wheel lift equipment
The tow truck uses two pivoting arms that go under the front tires and lift them
off the ground. The rear tires remain on the ground. This is an acceptable way
to tow your vehicle.
Emergency Towing NOTICE Trying to lift or tow your vehicle by the bumpers
will cause serious damage. The bumpers are not
designed to support the vehicle's weight. NOTICE Improper towing such as towing behind a
motorhome or other motor vehicle can damage the
transmission.
Never tow your vehicle with just a rope or chain.
It is very dangerous, since ropes or chains may shift
from side to side or break.
Page 303 of 324