Î
Î
If something electrical in your
vehicle stops working, the first thing
youshouldcheckforisablownfuse.
Determine f rom the chart on pages
, and , or the diagram on
thefuseboxlidorthefuselabel,
which f use or f uses control that
component. Check those f uses f irst,
but check all the f uses bef ore
deciding that a blown f use is not the
cause. Replace any blown f uses and
check if the device works. Remove the cover from the
Check each of the large f uses in
the under-hood f use box by
looking at the wire inside.
Removing these f uses requires a
Phillips-head screwdriver.
Models equipped with the
keyless access system have an
engine start/stop button instead
of an ignition switch. VEHICLE
OFF (LOCK) Mode is the
equivalent of LOCK (0). For
more inf ormation, see pages
and .
Turn the ignition switch to the
LOCK (0) position.
Make sure the headlights and all
other accessories are of f .
3.
1.
2.
:
181
178
569 570 571
Checking and Replacing Fuses
Fuses
566
FUSE
BLOWN
10/07/29 12:54:38 31TK4620_571
fuse box.
2011 TL
µ
Thediagramsinthissectiongive
you the dimensions and capacities of
your vehicle and the locations of the
identif ication numbers. It also
includes inf ormation you should
know about your vehicle’s tires and
emissions control systems. ................
Identif ication Numbers . 578
................................
Specif ications .580
DOT Tire Quality Grading ..........................
(U.S. Vehicles) .583
.................................
Tire Labeling .585
Tire Pressure Monitoring System (TPMS) Required Federal ............................
Explanation .587
.......................
Emissions Controls .589
Three Way Catalytic .................................
Converters .591
........................
Emissions Testing .592
T echnical Inf ormation
Technical Inf ormation
577
10/07/29 12:55:49 31TK4620_582
2011 TL
