2011 Acura MDX clock

[x] Cancel search: clock

Page 552 of 609

Acura MDX 2011  Owners Manual The wheel nut wrench supplied with
your vehicle is specially adapted to fit
the hoist shaft. Do not use any other
tool.8. Put the wheel nut wrench on the hoist shaft. Turn the wrench
counterclockwise

Page 553 of 609

Acura MDX 2011  Owners Manual 12. Place the jack under the jackingpoint nearest the tire you need to
change. Turn the end bracket
clockwise until the top of the jack
contacts the jacking point. Make
sure the jacking point tab is
r

Page 555 of 609

Acura MDX 2011  Owners Manual 22. Slowly turn the wheel nut wrenchclockwise to take up the slack of
the hoist cable. Make sure the
bracket is seated in the center hole
of the flat tire.
23. Turn the wheel nut wrench clockwise unti

Page 560 of 609

Acura MDX 2011  Owners Manual 4. If the temperature gauge stays atthe red mark, turn off the engine.
5. Look for any obvious coolant leaks, such as a split radiator hose.
Everything is still extremely hot,
so use caution. If you f

Page 597 of 609

Acura MDX 2011  Owners Manual BrakesAnti-lock Brakes (ABS)
...........
455
Break-in, New Linings
.............
418
Bulb Replacement
...................
525
Fluid
.......................................
519
Parking
................
Page:   < prev 1-8 9-16 17-24