2011 Acura MDX mirror
[x] Cancel search: mirrorPage 2 of 22
A D V A N C E D T E C H N O L O G Y G U I D E
The Advanced Technology Guide is designed to help you get
acquainted with your new Acura and provide basic instructions
on some of the technology items.
This guide is not intended as a substitute for the Owner’s
Manual. For complete information on vehicle controls and
operation\b please refer to the respective sections in the
Owner’s Manual.
As with the Owner’s Manual\b this guide covers all trim levels of
the Acura MDX. Therefore\b you may find descriptions of
equipment and features that are not on your particular vehicle.
Bluetooth®Audio (Tech/Advance)....................................\1......................... 3\f
iPod®or USB Flash Memory (Tech/Advance) ....................................\1........31
Note Function (Tech/Advance) ....................................\1.............................. 31
Hard Disc Drive (HDD) Audio (Tech/Advance) ....................................\1..... 32
Song By Voice
TM(SBV) (Tech/Advance) ....................................\1................ 33
Rear Entertainment System (RES)(if equipped) ....................................\1.... 35
Collision Mitigation Braking System
TM(CMBSTM) (Advance) ..................... 36
Blind Spot Information System (BSI) (Advance) ....................................\1..... 37
Adaptive Cruise Control (ACC) (Advance) ....................................\1.......... 38
My Acura....................................\1...........................................\1......................... 4\f
Safety Reminder ....................................\1...........................................\1............. 41
Fuel Requirement ....................................\1...........................................\1........... 41
Advance Package shown
Instrument Panel Indicators....................................\1....................................\1.... 2
Multi-Information Display (MID) ....................................\1................................. 4
Keyless Memory Settings....................................\1....................................\1......... 9
Rearview Camera ...............................................\1....................................\1...... 11
Reverse Tilt Door Mirrors ....................................\1....................................\1........ 12
HomeLink
®....................................\1......................................................\1............ 13
Voice Recognition ...............................................\1....................................\1..... 14
Navigation (Tech/Advance) ....................................\1................................... 2\f
AcuraLink Real-Time Traffic
TM...................................................\1.................... 22
AcuraLink Real-Time WeatherTM...................................................\1............... 23
AcuraLink®Messages ....................................................................\1................ 24
Bluetooth®HandsFreeLink®....................................................................\1....... 25
V O I C E
R E C O G N I T I O N
p.14
B L \b E T O O T H®
H A N D S F R E E L I N K ®
p.25
A D A P T I V E C R U I S E
C O N T R O L
p. 38
A U D I Op.3\f
N A V I G A T I O Np.2\f
B L I N D S P O T I N F O R M A T I O N
S Y S T E M
p.37
M U L T I I N F O R M A T I O N
D I S P L A Y
p.4
11 MDX ATG\fATG_NEW STYLE 7/21/2010 5\f47 PM Page 2
Page 7 of 22
C u s t o m i z i n g S e t t i n g s
S t o r i n g A u d i o a n d C l i m a t e C o n t r o l S e t t i n g s
Some examples on how to program vehicle settings.1.Turn the ignition switch to
ON(II).
2. Store your desired stations on
the preset buttons and adjust
your preferred audio sound
levels (BASS\b TREBLE\b etc.).
3. Set your preferred climate
control settings (fan speed\b
temperature\b etc.).
4. Once you turn the car off\b your preferred settings are
saved and activated by the
corresponding remote (1 or 2).
D r i v i n g P o s i t i o n M e m o r y S y s t e m ( D P M S )
1. Turn the ignition switch to
ON (II). Shiftinto Park (P).3.Press and hold the MEMO
button until you hear a beep\b
then release.
2. \fdjust your preferred seat\b
steering wheel\b and outside
mirror settings.4. Press and hold the memory
button # corresponding to the
remote (1 or 2) you are using
until you hear two beeps.
* See Customized Settings in your owner’s manual for other programmable settings.
R E A R V I E W C A M E R A
For added convenience\b the area behind your vehicle is displayed to help you
navigate while backing up.
When you shift into
Reverse (R)\b a real-time
image of the area behind
your vehicle\b along with
helpful parking guide
lines\b shows in the
monitor. It turns off when
you shift out of Reverse.
H o w I t W o r k s
Press and hold the power
button for about 3 seconds.
A d j u s t i n g t h e V i e w M o d e ( B a s e M o d e l )
T u r n i n g t h e G u i d e L i n e s
O n o r O f f
Press and release the power
button.
T u r n i n g t h e R e a r v i e w
M o n i t o r O n o r O f f
Press and hold CANCEL for
about 3 seconds.
A d j u s t i n g t h e V i e w M o d e ( T e c h \b A d v a n c e )
T u r n i n g t h e G u i d e
L i n e s O n o r O f fS w i t c h i n g V i e w s
Note: A stored memory position is linked to the corresponding keyless remote
(1 or 2). Each item begins to adjust when you unlock the driver’s door with
the remote and enter the vehicle. Base Model
Base Model
Tech/\fdvance
Tech/\fdvance
There are 3 rearview modes.
Press ENTER to toggle between
views. Turnthe Interface Dial to
adjust the screen brightness.
Normal
Normal
Top down
Top down Wide
Wide
11
1\f
11 MDX ATG\fATG_NEW STYLE 7/21/2010 5\f49 PM Page 7
Page 8 of 22
1311
H O M E L I N K ®
Press and hold thebutton on the
remote and the HomeLin kbutton at
the same time. Then, while
continuing to hold the HomeLink
button, press and release the button
on the remote every 2seconds.
Does the LED blink at a faster ratewithin 20
seconds?
Press and hold
the HomeLink
button again. Training
complete
YES
NO
HomeLink indicator
flashes for 2 seconds,
then remains on. HomeLink LED
remains on.YES
NO YES
NO
Position the remote transmitter you
wish to link 1–3 inches from the
HomeLink button you want to program.1
Press and hold the desired
HomeLink button and the button on
the remote transmitter.
Does the HomeLink indicator (LED) blink at a
faster rate after about 10 seconds?
2
a
The remote has a rolling code.
Press the “learn” button on the
remote-controlled device (e.g.,
garage door opener).
Press the programmed HomeLink
button again; the remote-controlled
device should operate. Within 30 seconds, press and
hold the programmed HomeLink
button for 2 seconds.a
Press and hold theprogrammed
HomeLink button for about a
second.
Does the device (garage door opener) work?
3
b
4
5
T r a i n i n g a B u t t o n
The HomeLink Universal Transceiver built into your vehicle can be programmed to
operate up to three remote-controlled devices around your home\b such as garage
doors\b lighting\b or home security systems.
If you have any problems programming HomeLink\b see the owner’s manual
included with the device you are trying to program\b call HomeLink at
(8\f\f) 355-3515\b or visit www.homelink.com.
R E V E R S E T I L T D O O R M I R R O R S
H o w I t W o r k s
When you shift into Reverse (R)\b you can tilt either outside door mirror down slightly to
improve your view as you parallel park. Shifting out of Reverse returns the tilted mirror
to its original position.
• To tilt the driver’s
door mirror\b movethe
mirror selector switch
to the left (L) position.
• To tilt the passenger’s side door mirror\b
move the mirror
selector switch to the
right (R) position.
• To turn the feature off\b move the switch
to the middle
position.
12
11 MDX ATG\fATG_NEW STYLE 7/21/2010 5\f50 PM Page 8