4
VISIBILITY
WIPER CONTROLCONTROLS
Manual controls
The wiper commands are issued directly
by the driver by means of the stalk A
and
the ring B
.
single wipe.
Windscreen wipers
A.
wiping speed selection stalk:
park.
intermittent (the speed can be
set manually),
slow.
fast.
B.
intermittent operation or rain sensor
sensitivity adjustment ring.
You can increase or decrease:
●
the wiping frequency when the in-
termittent mode is active,
●
the sensitivity of the rain sensor
when the automatic mode is active.
- "+": high sensitivity.
- "-": low sensitivity.
Windscreen wash
Pull the wiper stalk towards you. The
windscreen wash then the wipers oper-
ate for a set time.
The headlamp wash is also activated if
the dipped
beam
headlamps are on
.
Headlamp wash
Press the end of the lighting stalk to
activate the headlamp wash, when the
dipped beam headlamps are on.
Certain windscreen wiper func-
tions (intermittent operation, ...)
can be confi gured via the colour
screen "Equipment" menu.
Model with AUTO wiping
Model with intermittent wiping
Programming
An automatic control mode is also avail-
able, the automatic rain sensitive wind-
screen wipers.
automatic rain sensitive wipers
(the speed can be set manually).
or
