70
COMFORT
  The seat cushion lowers to be 
covered by the seat back; this 
leaves a fl at  boot fl oor, if the 
adjustable fl oor is in the intermediate 
position.  
 
 
Folding the seat from the rear 
 
Check that no object, either on or un-
derneath the seat, could hinder its 
movement. 
   
 
 ) 
  Move the corresponding front seat 
forwards if necessary, 
   
 ) 
  check that the seat belt is positioned 
correctly on the side of the seat 
back, 
   
 ) 
  place the head restraints in the low 
position or remove them if neces-
sary, 
   
 ) 
  pull the control  1 
 forwards to release 
the seat back  2 
 which tilts easily 
onto the seat cushion  3 
.  
 
 
Returning the seat back to its 
original position 
   
 
 ) 
  Put the seat back in the upright posi-
tion and secure it, the seat cushion 
also returns to its original position, 
   
 ) 
  check that the red indicator, located 
at the control  1 
, is no longer visible, 
   
 ) 
 refi t the head restraints or put them 
back in place.  
  When returning the rear seat back to 
its original position, take care not to 
trap the seat belts and ensure that their 
buckles are positioned correctly.   
81
ACCESS
   
The electric window controls 
remain operational for ap-
proximately 45 seconds after 
the ignition is switched off or until the 
vehicle is locked after a front door is 
opened. 
  If one of the passenger windows can-
not be operated from the driver's door 
control pad, carry out the operation 
from the control pad of the passen-
ger door concerned, and vice versa.  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
ELECTRIC WINDOWS 
 
System intended to open or close a 
window manually or automatically. Fit-
ted with a safety anti-pinch system and 
a system for deactivation in the event of 
misuse of the rear controls. 
   
 
1. 
  Driver's electric window control. 
 
   
2. 
  Passenger's electric window 
control. 
 
   
3. 
  Rear right electric window 
control. 
 
   
4. 
  Rear left electric window control. 
 
   
5. 
  Deactivation of the rear electric 
window and door controls. 
 
   If the window cannot be closed 
(for example, in the presence 
of ice), immediately after the 
movement is reversed: 
   
 
 ) 
  press and hold the control until 
the window opens fully, 
   
 ) 
  then pull the control immediately 
and hold it until the window closes, 
   
 ) 
  continue to hold the control for 
approximately one second after 
the window has closed.  
 
 
The safety anti-pinch function is not 
operational during these operations.   
 
 
 
Safety anti-pinch 
  When the window rises and meets an ob-
stacle, it stops and partially lowers again.     
-   automatic mode 
 
   
 
 ) 
 Press or pull the control fi rmly. 
The window opens or closes fully 
when the control is released. 
   
 ) 
 Pressing the control again stops 
the movement of the window.  
 
 
 
One-touch electric windows 
 
There are two options: 
   
 
-   manual mode 
 
   
 
 ) 
 Press or pull the control gently. The 
window stops when the control is 
released.     
After approximately ten con-
secutive complete opening/
closing movements of the win-
dow, a protection function is activated 
to prevent damage to the electric win-
dow motor. 
  After this, you have approximately 
one minute within which to close the 
window. 
  Once the window is closed, the con-
trols will become available again af-
ter approximately 40 minutes.