9
!
i
PRACTICAL INFORMATION
143
  A fl at battery prevents the engine 
from starting (refer to the corre-
sponding paragraph).     If a roof operation is in progress, 
it will be completed, but no further 
operation is possible.  
ENERGY ECONOMY MODE 
 
System which manages the duration of 
use of certain functions to conserve a 
suffi cient level of charge in the battery. 
  After the engine has stopped, you can 
still use functions such as the audio 
equipment, windscreen wipers, dipped 
beam headlamps, courtesy lamp, etc. 
for a maximum combined duration of 
thirty minutes. 
Exiting economy mode 
  These functions are reactivated auto-
matically next time the vehicle is driven. 
   
 
 ) 
  In order to resume the use of these 
functions immediately, start the 
engine and let it run for a few minutes.  
  The time available to you will then be 
double the duration for which the engine 
is left running. However, this period will al-
ways be between fi ve and thirty minutes. 
Switching to economy mode 
 
Once the thirty minutes are over, a 
message appears on the multifunction 
screen indicating that the vehicle has 
switched to economy mode and the ac-
tive functions are put on standby. 
CHANGING A WIPER BLADE 
  Procedure for replacing a worn wiper 
blade with a new one without the use 
of tools. 
   
Removing a front wiper blade 
 
 
 
 ) 
  Raise the corresponding wiper arm. 
   
 ) 
  Unclip the wiper blade and remove it.  
 
 
 
Fitting a front wiper blade
 
 
 
 ) 
  Check the size of the wiper blade 
as the shorter blade is fi tted on the 
right-hand side of the vehicle. 
   
 ) 
 Put the corresponding new wiper 
blade in place and clip it. 
   
 ) 
  Fold down the wiper arm carefully.  
 
LOAD REDUCTION MODE 
 
System which manages the use of cer-
tain functions according to the level of 
charge remaining in the battery. 
  When the vehicle is being driven, the load 
reduction function temporarily deactivates 
certain functions, such as the air condi-
tioning, the heated rear screen... 
  The deactivated functions are reactivated 
automatically as soon as conditions permit.