Page 153 of 396
Fittings
Mats Removable carpet protection.
When fittin
g the mat for the first time, on the
driver's side use only the fixings provided in
the wallet attached.
The other mats are simply placed on the carpet.
Fitting Removal
To remove the mat on the driver's side: )
move the seat as far back as possible,
)
unclip the fixings, )
remove the mat.
Refitting
To refit the mat on the driver's side: )
position the mat correctly, )
refit the fixings by pressing, )
check that the mat is secured correctly.
To avoid any risk of jamming of the pedals:
- only use mats which are suitedto the fixings already present in the vehicle; these fixings must beused,
- never fit one mat on top of another.
The use of mats not approved byCITROËN may inter fere with access tothe pedals and hinder the operation of the cruise control/speed limiter.
Page 220 of 396

Memorising speeds This memorisation of speeds applies to both the speed limiter and the cruise control.
You can memorise up to 5 speeds in the system. By default, a few speeds are already memorised.
With your Audio system
)Go to the main menu by pressing the
"MENU"
button. )Select the "Personalisation-configuration" menu and confirm. )Select "Vehicle parameters" menu andconfirm. )Select the "Driving assistance" line and conform. )Select "Speeds memorised" line and confirm. )Modify the speed. )Select "OK
" and confirm to save themodifications.
With the eMyWay satellite
navi
gation system
)Press the "MEM"button to display the list
of speeds memorised.
Access
For safety reasons, the driver must only carry out these operations whenstationary.
)
Go to the main menu by pressing the left
hand thumb wheel at the bottom of thesteering wheel. ) Select the "Vehicle parameters" menu andconfirm. )Select the "Driving assistance" line and confirm. )
Select the "Speeds memorised" line and confirm. )
Modify the speed. )
Select " OK" and confirm to save the
modifications.
These operations are only possible when stationary with this system.
Selection
To select a memorised speed: )press and hold the "+" or " -" button; the system stops at the nearest memorised speed, )press and hold again the " +
" or "-
" button to select another memorised speed.
A reminder of the speed and the state of thesystem (on/off) is displayed in the instrumentpanel.
Page 223 of 396

221Driving
Cruise control
System which automatically maintains thespeed of the vehicle at the value programmed
by the driver, without any action on the
accelerator pedal.
The
functions of this system are grouped
together on the steering mounted controls.
1
.Cruise control mode selection dial.
2. Speed programming/value decreasebutton.3.
Speed programming/value increase button.4.
Cruise control off/resume button.
5. Memorised speeds display button.(see "Memorising speeds")
Steering mounted controls
The cruise control system cannot, in any
circumstances, replace the need to respect speed limits, nor can it replace the need for vigilance and responsibility on the par t of the driver.
You are advised to keep your feet near the pedals at all times.
The programmed information is grouped
together in the instrument panel screen.
6
. Cruise control off/resume indication.
7.Cruise control mode selection indication. 8. Programmed speed value.9.Selecting a stored speed.
(see "Storing speeds")
Displays in the instrument panel
Operation
The cruise control is switched on
manually: it
requires a minimum vehicle speed of 25 mph
(40 km/h) and engagement of:
- fourth gear on the manual gearbox,
- second gear on the electronic gearbox system or automatic gearbox, in sequentialdriving mode,
- position A
on the electronic gearboxsystem or Don an automatic gearbox.
The cruise control is switched off
manually for by pressing the brake or clutch pedal or
on triggering of the ESP system for safety reasons.
It is possible to exceed the programmed speed
temporarily by pressing the accelerator pedal.
To return to the programmed speed, simply
release the accelerator
pedal.
Switching off the ignition cancels any programmed speed value.
Page 224 of 396