2011.5 Citroen C4 AIRCROSS RHD buttons

86
Comfort
From the outside:) by locking or unlocking the vehicle,using the remote control or the locking / unlocking buttons (for vehicles fitted with
the "Keyless Entry and Starting" system).



If you have folded the mirrors using thecontrol C
, you must use this control tounfold them, other wise the mirrors will not be lock in place correctly.
Some mirror functions (in particular the automatic folding and unfolding of the door mirrors) can be configured via thecolour screen "Equipment" menu.
The mirrors can also be foldedmanually. From inside:
- with the i
gnition switch in the "ON" or "ACC" position, by pressing the control C,
- with the ignition switch in the "LOCK"
position, by pressing control C, within30 seconds.

126
Driving
When the cruise control is in operation,pay attention if you press and hold oneof the programmed speed adjustment buttons: this can result in a very rapidchange in the speed of your vehicle.
Do not use the cruise control on slippery roads or in heavy traffic. On a steep descent, the cruise control will not be able to prevent the vehiclefrom exceeding the programmed speed.
To prevent the mat from becomingcaught under the pedals:


- ensure that the mat is positioned correctly,


- never fit one mat on top of another.
T
o deactivate the cruise control:
)press the brakeor clutchpedal, or )press button 1 "ON OFF", or )press button 4 "CANCEL".
Deactivating the function
Reactivating the function

When the cruise control has been deactivatedusing the button 4 "CANCEL"
, you can return
to the stored speed by pressing button 3 "ACC
RES"
when you reach a minimum speed of 25 mph (40 km/h).

The cruise control may be deactivatedautomatically:
)when the vehicle reaches a speed below
20 mph (35 km/h),)when the active stability control system (ASC) comes into operation.

224
01FIRST STEPS
AUDIO: select Audio-video (FM, CD,
music server, ...) or Navigation (map)
display.
V
OL: adjust audio-video volume.
SCALE: change the scale of the map.
P
OWER: audio system on/off (only).
OPEN: opens the screen andgives access to CD/DVD.
A second press closes the
screen.
ENT:
confi rms the choice of the itemselected in the screen.
For certain operations, con
fi rmation is given by pressing the touch screen.

Scroll the map displa
yed or selection of an
item.
Move a fi n
ger over the screen to operate
the system.
Use the buttons o
ffered on the screen.
For safet
y reasons, the driver
must only carry out operations
which require prolonged
attention with the vehicle
stationary.

Mute on/off.
Next or
previous selection for:


- a radio station,

- an audio track
(CD),

- a chapter
(DVD).


Set the audio volume.

Chan
ge the audio-video source (FM, CD, music server, ...).

234
03

Entering an address and starting guidance (2/2)

Press


Explanation Result

Press [Street] and enter the name of a street usin
g the touch keypad.
When a character of the name of the street is entered, if 5 streets or fewer are
reco
gnised, you can select a street from a list which is displayed or press [List].

Press [House
#] and enter the number of the house using the touch keypad.
You can enter the name of a junction instead of the number of thestreet. Press [Junction] and select the name from a list which isdisplayed.
Thi
s is the result once all of the information has been entered:

If
you agree with the information press [Set], otherwise press one of the buttons to correct.

Press [Start] to start the navi
gation.

/

NAVIGATION - GUIDANCE

250
04AUDIO / VIDEO
PLAYING A TRACK OR A PLAYLIST IN THE MUSIC SERVER

Explanation
Result
Press
Press the MODE button then Music Server.
The playlists are played in a loop.
The server can play a track while recording another track from a CD. You must wait until recording is complete before playing the recorded track.
Selectin
g a track
Press these buttons to switch between groups, playlists and tracks.
You cannot switch directly from groups to tracks.

Press [
Track] to select the previous track or return to the beginning of the trackcurrently being played.
Pr
ess and hold for fast backwards.
Press [Track
] to select the next track.
Pr
ess and hold for fast forwards.
Selectin
g a playlist
Press
[ Playlist] to select the previous playlist.
Press [Pla
ylist ] to select the next playlist.

292
1
04
1
1
Press one of the six buttons "1" to "6" until anaudible signal is heard.
The sound cuts out then becomes audible again
when the station has been preset.
Th
e number of the button and the associated radiofrequency appear on the screen. MANUAL STATION PRESETTING
To recall the pre-set stored settin
g, press the button and release it
within two seconds.
RADIO
You can preset up to six stations on each waveband.
Presetting a new station replaces the previous station.
AUTOMATIC STATION PRESETTING

Disconnecting the battery terminals clears the preset radio stations.

Stations can only be preset automatically on wavebands FM3, MWand LW.
Presettin
g new stations replaces the previous stations.
This presettin
g can be activated automatically irrespective of the
waveband selected.
Pr
ess the "AM/FM" button for more
than two seconds.
The six stations offerin
g the best
reception are preset and classifi ed
from the weakest to the strongest on
the six corresponding buttons.

RECALLING PRESET STATIONS

Press one o
f the six buttons "1" to "6". The stationcorresponding to the waveband selected appears on
the screen.

295

04
1
2
RADIO

SEARCH FOR A "PTY" BROADCAST
Pr
ess the "PTY" button.
Turn the "TUNE" dial to select the t
ype
of programme required.
Two seconds later, the radio searches
for a broadcast which corres
ponds
to your selection; the type of PTY selected fl ashes in the screen.
Once the station has been found, its
name appears in the screen.
You can press the "
SEEK " or
"SEEK " buttons to fi nd another station.
I
f no station is found corresponding to your selected type of
programme, "NONE" appears in the screen for fi ve seconds and the
radio returns to the previous station.T
urn the "TUNE" dial to set the PTY
programme to be stored.

Pr
ess one of the six buttons "1" to "6" for more than
two seconds.
The sound cuts out then becomes audible a
gain
when the programme has been stored.
Th
e number of the button and the associated PTY programme appear in the screen.
To recall the preset memor
y setting, press the button and release it
within two seconds. PRESETTING A "PTY" PROGRAMME
You can preset up to six PTY programmes.
Each new pro
gramme stored replaces the previous one.

301
05
2
3
1
1

Press the "DISP" button for more than
two seconds to activate the ID3 Tag
information. "TAG" appears in thescreen.
Press the "DI
SP" button several times
in succession; the Tag ID3 information
appears in the following order:

ALBUM NAME / TRACK NAME / ARTIST NAME / NORMAL DISPLAY MODE.
To deactivate this information,
press
the "DISP" button again for more than
two seconds.

If th
e information exceeds
12 characters, press the "PAGE"
button to see the rest.
In the absence o
f MP3 or ID3 Taginformation to be displayed,
"NOTITLE" appears in the screen.

On CD-R/RWs, the quality of the playing sound depends on the encoding software, the burning device and the burning speed used.
Dependin
g on the fl ow chart of the MP3 folders and fi les on the disc, play may not begin immediately.
















CD CHANGER

SELECTING CHANGER MODE

After inserting at least one disc, printedface upwards, the changer starts
automatically.
I
f the changer already contains a disc, press the "CD" button.
"CD", the disc and track numbers and
the pla
ying time appear in the screen.
MUSIC MEDIA PLAYERS

See also "CD-Text display" and "MP3 / ID3 Tag CD".
LOADING A DISC

The CD chan
ger can hold up to 6 CDs.
Press the "L
OAD" button briefl y. "WAIT" appears on the display.

When the changer is ready, the
indicator lamp on the "LOAD" button comes on and "LOAD DISC N° (1-6)"
appears in the screen.
If several slots are empt
y, select oneusing one of the "DISC" buttons.

Insert circular compact discs only.
8 cm compact discs cannot be pla
yed by the changer.