Page 74 of 128
PRACTICAL INFORMATION
72 -
   
 
1. 
  Power steering reservoir 
   
2. 
  Windscreen and headlamp wash 
reservoir 
   
3. 
 Coolant reservoir    
4. 
 Brake fl uid reservoir 
   
5. 
 Battery 
   
6. 
 Air fi lter    
7. 
 Dipstick 
   
8. 
  Engine oil reservoir  
 
1.4 LITRE PETROL ENGINE  
     
        
        Page 75 of 128
73 PRACTICAL INFORMATION
-
   
 
1. 
  Power steering reservoir 
   
2. 
  Windscreen and headlamp wash 
reservoir 
   
3. 
 Coolant reservoir    
4. 
 Brake fl uid reservoir 
   
5. 
 Battery 
   
6. 
 Air fi lter    
7. 
 Dipstick 
   
8. 
  Engine oil reservoir  
 
1.6 LITRE PETROL ENGINE  
     
        
        Page 76 of 128
PRACTICAL INFORMATION
74 -
   
 
1. 
  Power steering reservoir 
   
2. 
  Windscreen and headlamp wash 
reservoir 
   
3. 
 Coolant reservoir    
4. 
 Brake fl uid reservoir 
   
5. 
 Battery 
   
6. 
 Air fi lter    
7. 
 Dipstick 
   
8. 
  Engine oil reservoir  
 
1.9 LITRE DIESEL ENGINE 
     
        
        Page 77 of 128
75 PRACTICAL INFORMATION
-
   
 
1. 
  Power steering reservoir. 
   
2. 
 Windscreen/headlamp wash 
reservoir. 
   
3. 
 Coolant reservoir.    
4. 
 Brake fl uid reservoir. 
   
5. 
 Battery. 
   
6. 
 Air fi lter.    
7. 
 Dipstick. 
   
8. 
  Engine oil reservoir. 
   
9. 
 Priming pump.  
 
1.6 LITRE TURBO DIESEL HDI ENGINE  
     
        
        Page 79 of 128

77 PRACTICAL INFORMATION
-
CHECKING LEVELS
   
Dipstick 
   
Oil change 
  According to the information given in 
the servicing booklet.     
Viscosity selection 
  In all cases, the oil selected must 
meet the manufacturer's require-
ments.  
    
Note: 
 the coolant does not need to 
be changed. 
   
For vehicles equipped with a par-
ticle fi lter, the engine fan may op-
erate after the ignition has been 
switched off, even when the engine 
is cold.   
 
  There are two marks 
on the dipstick: 
   
A 
 = maximum 
  Never fi ll  past  this 
mark. 
   
B 
 = minimum 
  To maintain the reli-
ability of engines and 
emission control sys-
tems, the use of ad-
ditives in engine oil is 
prohibited.  
 
 
Brake fluid level 
 
The brake fl uid must be changed ac-
cording to the manufacturer's servic-
ing schedule. 
  Use fl uids recommended by the 
manufacturer, which fulfi l  DOT4 
standards.  
 
 
Cooling system 
 
Use the fl uid recommended by the 
manufacturer. 
  When the engine is warm, the tem-
perature of the coolant is controlled 
by the engine fan. As this fan can op-
erate with the ignition key removed 
and because the cooling system is 
pressurised, wait for at least one hour 
after the engine has stopped before 
carrying out any work. 
  Slacken the cap by two turns to re-
lease the pressure to prevent any 
risk of scalding. When the pressure 
has dropped, remove the cap and 
top up the level. 
   
Power steering reservoir 
 
 
 
 ) 
  Open the reservoir, with the en-
gine at ambient temperature. The 
level should always be above the 
MIN. mark and close to the MAX. 
mark.  
 
 
 
Windscreen and headlamp 
wash level 
  For best quality cleaning and for 
your safety, we would advise that 
you use products recommended by 
CITROËN. 
  For optimum cleaning and to prevent 
freezing, this fl uid must not be topped 
up or replaced with water.  
 
 
Used products 
 
Avoid products such as used oil and 
brake fl uid coming into prolonged 
contact with the skin. 
  Do not dispose of used oil, brake fl uid or 
coolant into drains or onto the ground. 
Empty used oil into the containers pro-
vided for this purpose in the CITROËN 
dealer network (France) or to an author-
ised waste disposal site.  
 
 
Oil level 
 
It is normal to top up the engine oil 
between services. CITROËN rec-
ommends that you check the oil 
level, and top up if necessary, every 
3 000 miles (5 000 kilometres). 
  Check the level with the vehicle level, 
engine cold, using the oil level gauge 
on the instrument panel or the dip-
stick.  
     
        
        Page 124 of 128
VISUAL INDEX122 -
   
TECHNICAL DATA - MAINTENANCE 
 
Levels ..............................72-75,  77 
   
 
-  dipstick, 
   
-  power steering fl uid, 
   
-  brake fl uid, 
   
-  coolant.  
  Petrol supply cut-off, Diesel fuel 
priming ..................................... 78 
  Screenwash/headlamp wash, 
fi lling reservoir .................... 55, 77 
  Bulbs, changing bulbs 
   
 
-  front .....................................82-85 
   
-  rear .....................................86-87    Dimensions ..........................98-101 
  Engine technical data ........102-103 
  Weights, loads ...................105-108 
  Identifi cation markings .............. 109 
  Opening the bonnet, stay ..... 16, 53 
  Under bonnet engine views ...72-75   Air/oil fi lters, 
checks ...........................72-75,  78 
  Engine fuses ............................... 91 
  Battery .................................. 78,  92