2010 YAMAHA VITY 125 warning

[x] Cancel search: warning

Page 21 of 74

YAMAHA VITY 125 2010  Owners Manual INSTRUMENT AND CONTROL FUNCTIONS
3-6
3
EAU12950
Rear brake lever The rear brake lever is located on the
left handlebar grip. To apply the rear
brake, pull this lever toward the handle-
bar grip.
EAU45

Page 22 of 74

YAMAHA VITY 125 2010  Owners Manual INSTRUMENT AND CONTROL FUNCTIONS
3-7
3
EAU13221
Fuel Make sure there is sufficient gasoline in
the tank.
WARNING
EWA10881
Gasoline and gasoline vapors are
extremely flammable. To avoid fires
and explo

Page 23 of 74

YAMAHA VITY 125 2010  Owners Manual INSTRUMENT AND CONTROL FUNCTIONS
3-8
3
EAU13445
Catalytic converters This vehicle is equipped with catalytic
converters in the exhaust system.
WARNING
EWA10862
The exhaust system is hot after op-
erat

Page 24 of 74

YAMAHA VITY 125 2010  Owners Manual INSTRUMENT AND CONTROL FUNCTIONS
3-9
3To close the seat
1. Fold the seat down, and then push
it down to lock it in place.
2. Remove the key from the main
switch if the scooter will be left un-
attende

Page 25 of 74

YAMAHA VITY 125 2010  Owners Manual INSTRUMENT AND CONTROL FUNCTIONS
3-10
3
EAUT1712
Storage compartments Front storage compartment
WARNING
EWA11191

Do not exceed the load limit of
1.5 kg (3.3 lb) for the front stor-
age compartment.

Page 26 of 74

YAMAHA VITY 125 2010  Owners Manual INSTRUMENT AND CONTROL FUNCTIONS
3-11
3
EAU15112
Carrier 
WARNING
EWA10171

Do not exceed the load limit of 5
kg (11 lb) for the carrier.

Do not exceed the maximum
load of 167 kg (368 lb) for the v

Page 28 of 74

YAMAHA VITY 125 2010  Owners Manual INSTRUMENT AND CONTROL FUNCTIONS
3-13
3
Turn the key on.
Put the sidestand up.Push the start switch while applying
either of the brake levers. The engine will
start.Put the sidestand down.
If the engi

Page 29 of 74

YAMAHA VITY 125 2010  Owners Manual FOR YOUR SAFETY – PRE-OPERATION CHECKS
4-1
4
EAU15596
Inspect your vehicle each time you use it to make sure the vehicle is in safe operating condition. Always follow the inspection
and maintenance