2010 TOYOTA TACOMA ECO mode

--

BASIC FuNCTIONS
resume Play
The “Resume Play” feature allows the iPod to play the cur-
rent musical selection (Play queue) when connecting to the
Interface Kit. If the play queue was empty, the Interface Kit
plays the entire iPod.
music Play
Select songs in the play queue and continue to play repeat-
edly until another selection is made.
music Search
The user can make media selections from the iPod from a
preselected list of categories (Playlist, Artist, Album, Genre,
Podcast and Audiobook). The radio SAT controls coincide
with similar functions on the iPod.
Text display
The interface utilizes the same text fields provided for the
satellite radio. For each song, the radio displays a track num-
ber, artist name and song title information. This corresponds
to the SAT channel number, artist name and song title re-
spectively.
Connecting/disconnecting iPod
When the iPod is properly connected to the interface:
• iPod synchronized: On establishing connection with
the iPod, an “accessory attached” symbol will appear
as illustrated below.
• “Hello iPod” is shown in the radio’s display.
• Radio controlled: The iPod can only be operated us-
ing your vehicle’s SAT system controls. Once connect-
ed to the interface, the iPod’s controls (click wheel,
etc.) no longer function.
• Charging iPod: The vehicle charges the iPod battery
when the ignition switch is in the ON or ACC position.
• iPod battery is discharged: If the iPod is in a fully
discharged state, it may not be playable for a short
period. “iPod Charge” is displayed on the radio if the
iPod is in a low battery state.
When the iPod is disconnected from the interface:
• “No iPod” is shown in the radio’s display.
• The radio remains in the SAT mode.
NOTE: It is highly recommended to turn the vehicle’s igni-
tion switch (or radio’s power) OFF before disconnecting
the iPod from the radio.
All of these displays are subject to change. These are only examples.

-7-

SySTE m O PErATION
music Plays
Under the following conditions, the iPod begins playback
automatically.
• The ignition switch is in ACC or IGN position. The radio
is in SAT mode.
• Reconnect the iPod (whether in Play, Pause, Stop or
Sleep condition) with ACC ON and in SAT mode.
The interface begins playback with the last song played on
the iPod. The radio mode does not change, even if the iPod
contains no media. However, the radio displays the message:
“No Songs”.
Audio Stops
Under the following conditions, the iPod playback stops
automatically.
• The radio was changed to non-SAT mode (AM, FM, CD
etc).
• The iPod was disconnected from the interface cable
during playback.
• The radio system is turned OFF or ACC or IGN is turned
OFF.
• At the end of the last Chapter of an Audiobook.
May need to make a new selection to begin playback.
• Push the PWR•VOL knob to turn the
radio OFF.

-11-

method 2 (Quick Search)
The user can do a music search in the categories: Playlist,
Artist, Album and Podcast.
Presets 1-4 are assigned to each of these 4 categories. Cat-
egory browsing is not needed and selection is made directly
from the Presets. Presets 1-4, Preset 6 and TUNe are used
together as follows.
a. Preset Assignment
ButtonDisplayBrowse
Preset 1PlaylistPlaylist names
Preset 2ArtistArtist names
Preset 3AlbumAlbum names
Preset 4PodcastPodcast episodes
b. Category Selection
The last item displayed in the category will be displayed
on the radio using Presets 1-4.
Press Preset 1 to display the name of the last displayed
Playlist on the radio.
Press Preset 2 to display the name of the last displayed
Artist.
Press Preset 3 to display the name of the last displayed
Album.
Press Preset 4 to display the last displayed Podcast episode.
NOTE: If this is the first search after the iPod is connected,
the first item in the list is shown.
c. Browsing the Items in the Selected Category
If the user chooses to play all the songs in the last dis
-
played title of the chosen category (last displayed Playlist
/ Artist / Album / Genre / Podcast / Audiobook), go to the
next step.
The TUNe
•FILe knob is used for browsing the items in
the selected category. Turn the TUNe•FILe knob right/left
to display the name of the next/previous item in the se-
lected category.
d. Select Songs
Preset 6 is used to make a selection when the desired
item in the selected category is shown in the radio’s dis-
play. Press the Preset 6 button to play songs from the dis-
played item in the selected category. This item becomes
the “Now Playing” list of the iPod. The song track will be
displayed on the radio and the search is completed.
If Preset 6 is not pressed for over 15 seconds after the
item in the chosen category is displayed on the radio,
the Search operation will time-out and the radio returns
to the playback mode. The radio continues playing the
previous “Now Playing” list, with its song information dis-
played.