2010 TOYOTA PRIUS instrument cluster

1
2
3
4
5
6
7
3
PRIUS_U (OM47668U) U.S.A.
2-1. Driving proceduresDriving the vehicle............... 150
Power (ignition) switch ........ 162
EV-Drive Mode.................... 168
Transmission....................... 171
Turn signal lever ................. 178
Parking brake ...................... 179
Horn .................................... 180
2-2. Instrument cluster Gauges and meters ............ 181
Indicators and warning 
lights ................................. 185
Multi-information display ..... 188
2-3. Operating the lights 
and windshield wipers
Headlight switch .................. 206
Fog light switch ................... 209
Windshield wipers 
and washer ....................... 210
Rear window wiper 
and washer ....................... 212
Headlight cleaner switch ..... 213 2-4. Using other driving systems
Cruise control ..................... 214
Dynamic radar 
cruise control .................... 218
Rear view monitor 
system .............................. 231
LKA (Lane-Keeping 
Assist) .............................. 235
Hill-start assist control ........ 243
Driving assist systems ........ 245
Pre-Collision System .......... 249
2-5. Driving information Cargo and luggage ............. 255
Vehicle load limits............... 260
Winter driving tips ............... 261
Trailer towing ...................... 266
Dinghy towing ..................... 267
2When driving

When driving2
149
PRIUS_U (OM47668U) U.S.A.
2-1. Driving proceduresDriving the vehicle............ 150
Power (ignition) switch ..... 162
EV-Drive Mode................. 168
Transmission.................... 171
Turn signal lever .............. 178
Parking brake ................... 179
Horn ................................. 180
2-2. Instrument cluster Gauges and meters ......... 181
Indicators and warning 
lights .............................. 185
Multi-information  display............................ 188 2-3. Operating the lights and
windshield wipers
Headlight switch ............... 206
Fog light switch ................ 209
Windshield wipers 
and washer .................... 210
Rear window wiper  and washer .................... 212
Headlight 
cleaner switch ................ 213
2-4. Using other driving systems Cruise control ................... 214
Dynamic radar 
cruise control ................. 218
Rear view monitor 
system ........................... 231
LKA (Lane-Keeping 
Assist) ............................ 235
Hill-start assist control ...... 243
Driving assist systems ..... 245
Pre-Collision System........ 249
2-5. Driving information Cargo and luggage .......... 255
Vehicle load limits ............ 260
Winter driving tips ............ 261
Trailer towing ................... 266
Dinghy towing .................. 267

163
2-1. Driving procedures
2
When driving
PRIUS_U (OM47668U) U.S.A.
■
Stopping the hybrid system
Stop the vehicle.
Press the “POWER” switch.
Check that the shift position indicator on the instrument
cluster is set in “P”.
Set the parking brake. ( P. 181)
Release the brake pedal and check that the indicator on the
“POWER” switch is off.
If you stop the hybrid system without setting the shift position to
“P”, the shift position will be shifted to “P” automatically. You can
also shift the shift position to “P” by pressing the “P” position
switch.
STEP1
STEP2
STEP3
STEP4
STEP5

166 2-1. Driving procedures
PRIUS_U (OM47668U) U.S.A.
■When leaving the vehicle
If the indicator on the “POWER” switch is not off, the “POWER” switch is still
not in OFF mode. 
Turn the “POWER” switch to OFF before you leave the vehicle.
■ Auto “P” position function
● If the “POWER” switch is pressed while the hybrid system is operating
and the vehicle is at a complete stop, the shift position will be automati-
cally switched to “P” at the same ti me as the “POWER” switch is turned
to OFF. 
When turning the “POWER” switch to OFF while the shift position is not
set to “P”, operate the “POWER” switch while pushing down fully on the
brake pedal. Then, release the brake pedal after confirming that the shift
position indicator on the instrument cluster is set in “P”.
● If the auto “P” position function is malfunctioning, it may not be possible
to turn the “POWER” switch to OFF. In this event, the “POWER” switch
can be turned to OFF after applying the parking brake. 
Have the vehicle inspected by your Toyota dealer immediately.
■ When the ambient temperature is lo w, such as during winter driving
conditions
It may take time until the “READY” indicator comes on.
■ Sounds and vibrations specific to a hybrid vehicle
 P. 3 1
■ When the hybrid system is malfunctioning
 P. 497
■ Electronic key battery depletion
 P. 6 4
■ When the electronic key battery is discharged
 P. 460
■ Conditions affecting operation
 P. 6 5

174 2-1. Driving procedures
PRIUS_U (OM47668U) U.S.A.
Changing shift ranges to “P” positionPush the “P” position switch with
the brake pedal pressed down.
The “P” position icon is displayed
on the instrument cluster, and the
indicator on the “P” position
switch comes on.
You can only shift to other posi-
tions from “P” when the brake
pedal is depressed.
When parking, check that the “P”
position icon is displayed on the
instrument cluster, and release
the brake pedal gently after
applying the parking brake.
ITO21P107
■Using engine brake
To use the engine braking, shift the shift lever to “B” position.
● During high speed driving, you may feel that deceleration by engine brak-
ing is less than that of a typical vehicle.
● Do not continue normal driving with the transmission in “B” for a long
time.
This may cause decreased fuel economy. To prevent this, use “D” for
normal driving.

175
2-1. Driving procedures
2
When driving
PRIUS_U (OM47668U) U.S.A.
■
Reverse warning buzzer
When shifting into “R”, a buzzer will sound to inform the driver that the shift
lever is in “R”.
■ When in heavy traffic
If the shift lever is in “N”, the hybrid battery (traction battery) will not be
charged. To help prevent the battery from discharging, avoid putting the shift
lever in “N” for an extended period of time.
■ Eco Driving Mode
When the accelerator pedal is depressed in Eco Driving Mode, it may take
more time to accelerate than usual. This is normal operation.
■ If the system malfunctions
The following situations indicate a problem with the system. 
Immediately stop the vehicle in a safe place and contact your Toyota dealer.
● The indicator on the “P” position switch flashes. However, this does not
indicate a malfunction unless a warning message appears in the multi-
information display.
● All frames of the shift position indicators in the instrument cluster flash.
● The parking system error message appears on the multi-information dis-
play.
● The instrument cluster does not come on when the “POWER” switch is in
ON mode.

181
2
When driving
PRIUS_U (OM47668U) U.S.A.
2-2. Instrument cluster
Gauges and meters
The following gauges and meters illuminate when the “POWER”
switch is in ON mode.Fuel gauge
Displays the quantity of fuel remaining in the tank.
Speedometer
Displays the vehicle speed.
Instantaneous fuel consumption
Displays the current rate of fuel consumption.
Shift position indicators
Displays the shift position.

182 2-2. Instrument cluster
PRIUS_U (OM47668U) U.S.A.
Touch tracer display (if equipped)When the audio control switches,
climate control switches, “DISP”
switch or “TRIP” switch of the
steering wheel are touched, the
touch tracer display will appear
in front of the gauges, with the
touched switch highlighted to
allow the driver to identify the
switch that is being operated.
The switch can then be operated
by further presses.