2010 TOYOTA PRIUS lock

350
3-3. Using the hands-free system (for cellular phone)
PRIUS_U (OM47668U) U.S.A.
Security and system setup
To enter the menu of each setting, follow the steps below:
■Security setting items and operation procedure
● Setting or changing t he PIN (Personal Identification Number) 
1. “Setup”  2. “Security”  3. “Set PIN”
● Locking the phone book 
1. “Setup”  2. “Security”  3. “Phonebook Lock”
● Unlocking the phone book 
1. “Setup”  2. “Security”  3. “Phonebook Unlock”
■ System setup items and operation procedure
●Setting voice guidance volume 
1. “Setup”  2. “System Setup”  3. “Guidance Vol”
● Initialization 
1. “Setup”  2. “System Setup”  3. “Initialize”
can only be used for system setup operation.

352 3-3. Using the hands-free system (for cellular phone)
PRIUS_U (OM47668U) U.S.A.
Locking or unlocking the phone bookSelect “Phonebook Lock (Phbk Lo ck)” or “Phonebook Unlock
(Phbk Unlock)” by using a voice command or .
Input the PIN by either of th e following methods and select
“Confirm” by using a voice command or :
a. Press and say the registered PIN.
b. Input a new PIN by using .
Setting voice guidance volume
Select “Guidance Vol” by using .
Change the voice guidance volume.
To decrease the volume: Turn counterclockwise.
To increase the volume: Turn clockwise.
STEP1
STEP2
STEP1
STEP2

353
3-3. Using the hands-free
system (for cellular phone)
3
Interior features
PRIUS_U (OM47668U) U.S.A.
Initialization
Select “Initialize” and then “Confirm” by using .
Select “Confirm” by using a voice command or again.
■Initialization
● The following data in the system can be initialized:
• Phone book
• Outgoing and incoming call history
• Speed dials
• Registered cellular phone data
• Security code
● Once the initialization has been completed, the data cannot be restored
to its original state.
■ When the phone book is locked
The following functions cannot be used:
● Dialing by inputting a name
● Speed dialing
● Dialing a number stored in the call history memory
● Using the phone book
STEP1
STEP2

363
3
Interior features
PRIUS_U (OM47668U) U.S.A.
3-4. Using the interior lights
Interior lights list
Your Toyota is equipped with an illuminated entry system to assist in
entering the vehicle. Due to the fu nction of the system, the lights
shown in the following illustration automatically turn on/off accord-
ing to the presence of the electr onic key, whether the doors are
locked/unlocked, whether the door s are opened/closed, and the
“POWER” switch mode.
Interior light ( P. 365)
Personal/interior light ( P. 365)
Shift lever lighting
“POWER” switch lighting
Foot lights (if equipped)
Front door courtesy lights

364 3-4. Using the interior lights
PRIUS_U (OM47668U) U.S.A.
Personal/interior light main switchType A “OFF”
The personal/interior lights and
interior light can be individually
turned on or off.
Door position
The personal/interior lights and
interior light automatically turn on/
off according to the presence of
the electronic key, whether the
doors are locked/unlocked,
whether the doors are opened/
closed, and the “POWER” switch
mode.
On
The personal/interior lights and
interior light cannot be individually
turned off.
Type B
ITO34P102
Personal/interior light main switch

369
3-5. Using the
storage features
3
Interior features
PRIUS_U (OM47668U) U.S.A.
Console box
Type A Pull up the lever to release the
lock.
Slide the console box lid fully
rearward.
Lift the console box lid to
open.
Type B Lift the lid while pulling the lever.
ITO35P105
■Tray in the console box (type A only)
The tray can be raise backward.
ITO35P119
Console box

385
3-6. Other interior features
3
Interior features
PRIUS_U (OM47668U) U.S.A.
Luggage compar tment features
■Cargo hooks
Cargo hooks are provided for
securing loose items.
■ Auxiliary box
Center type A
Turn the knob to the
“UNLOCK” position and open
the lid.
Lift the center deck board.
STEP1
STEP2

389
3-6. Other interior features
3
Interior features
PRIUS_U (OM47668U) U.S.A.
Garage door opener
The garage door opener (HomeLink Universal Transceiver) is manufac-
tured under license from HomeLink.
Programming the HomeLink (for U.S.A. owners)
The HomeLink
 compatible transceiver in your vehicle has 3 buttons
which can be programmed to operate 3 different devices. Refer to the
programming method below appropriate for the device.
Buttons
Indicator
■ Programming the HomeLink

Point the remote control for the
device 1 to 3 in. (25 to 75 mm)
from the HomeLink
 control but-
tons.
Keep the indicator light on the
HomeLink in view while pro-
gramming.
The garage door opener can be programmed to operate garage
doors, gates, entry doors, door locks, hom e lighting systems, and
security systems, and other devices.
ITO36P12R
STEP1