2010 TOYOTA MATRIX Side marker

6
Headlights (low beam) P. 132
Pictorial indexExterior
Front fog lights  P. 135
Hood P. 289
Windshield wipers P. 136
Outside rear view
mirrors
P. 54
Front turn signal/parking and front
side marker lights
P. 123, 132
Headlights (high beam) P. 133Moon roof  P. 58

7
Tires
●Rotation
●Replacement
●Inflation pressure
●Information
P. 308
P. 369
P. 407
P. 415
Back door P. 33Doors P. 29
Fuel filler door P. 61
Rear turn signal lights P. 123
Rear window defoggerP. 174

: If equipped
Stop/tail and rear side
marker lights
P. 132
Rear window wiper  P. 138
License plate lights P. 132

132
2-3. Operating the lights and wipers
Headlight switch
The headlights can be operated manually.
The side marker,
parking, tail, license
plate and instrument
panel lights turn on.
The headlights and
all lights listed above
turn on.
U.S.A. Canada

337
4-3. Do-it-yourself maintenance
4
Maintenance and care
Light bulbs
You may replace the following bulbs yourself. The difficulty level of
replacement varies depending on the bulb. If necessary bulb
replacement seems difficult to perform, contact your Toyota dealer.
For more information about replacing other light bulbs, contact your
Toyota dealer.
■Prepare a replacement light bulb.
Check the wattage of the light bulb being replaced. (P. 4 1 1 )
■Front bulb locations
Headlight high beam
Front turn signal/parking
and front side marker lights
Front fog lightsHeadlight low beam

338 4-3. Do-it-yourself maintenance
■Rear bulb locations
Stop/tail and rear
side marker lights Rear turn signal lights
Back-up lights
License plate lights

341 4-3. Do-it-yourself maintenance
4
Maintenance and care
Unplug the bulb while depress-
ing the lock release.
■Front turn signal/parking and front side marker lights
Turn the bulb base counterclock-
wise.
Remove the light bulb.STEP4
STEP1
STEP2

342 4-3. Do-it-yourself maintenance
■Stop/tail and rear side marker lights, rear turn signal lights
and back-up lights
Open the back door.
Left side
Remove the cover.
Right side (type A)
Remove the cover using the flat-
head screwdriver.
To protect the cover, place a rag
between the flathead screwdriver
and the cover.
Right side (type B)
Remove the cover.
STEP1
STEP2
STEP2
STEP2

343 4-3. Do-it-yourself maintenance
4
Maintenance and care
Turn the bulb base counterclock-
wise.
Rear turn signal light
Back-up light
Stop/tail and rear side marker
light
Remove the light bulb.
Rear turn signal light
Back-up light
Stop/tail and rear side marker
lightSTEP3
STEP4