Navigation 99
General Information■Accuracy of vehicle positionArea in which GPS signals cannot be receivedBecause the radiowave signals from the GPS satellites travel primarily 
by line of sight, the navigation system might not be able to receiv e 
the signals in the areas described below.(If the GPS mark does not 
appear on the map screen, it mean s that the GPS radiowave signals 
are not being properly received.)
(1) Inside a tunnel
(2) Inside a building
(3) Under a three-dimensional road system such as for high spee d 
roads
(4) On boulevards lined with trees
(5) Between buildings
(6) Under a cliff or in a cave • If the GPS antenna or its surroundings are blocked by an obstac le 
(including cargo), it might not be possible for the system to 
receive the GPS radiowave signals.
• If multiple paths are created due to  the reflection from buildings, 
a large measurement error could occur, causing the vehicle's 
mark to deviate from its actual position.
Deviation of the vehicle's position markThe vehicle's position mark could  deviate from its actual position 
when the vehicle is being driven under the conditions listed below or 
due to conditions of the GPS satellites.
If the vehicle travels on a road whose actual shape differs from that in 
the map data, the vehicle's mark co uld deviate from the actual posi- tion. The correct position will even
tually appear on the screen 
through the correction function. If the screen does not show the cor-
rect position for an excessively long time, correct the current posi tion 
or make an automatic correction.
(1) The vehicle's mark could appear on a parallel road.
(2) When the road splits into a narrow Y, the vehicle's mark  could 
appear on the other fork of the Y.
(3) When the vehicle makes a right or left turn, the vehicle' s mark 
could appear on one street ahead or behind.
(4) If the vehicle is transported by means other than the vehi cle's 
own power, such as on a ferryboat, the vehicle's mark will 
remain in the position it was before the transport until the sys-
tem can calculate the position through the GPS.
(5) When the vehicle is driven on a steep incline, the vehicle' s mark 
could deviate from its actual position.
(6) If there are continuous gradual curves in the same directi on, the 
vehicle's mark could deviate from its actual position.
(7) If the vehicle is driven in a zigzag pattern, such as through fr e-
quent lane changes, the vehicle' s mark could deviate from its 
actual position.
(8) If the vehicle is placed on a tu rntable, such as in a parking area, 
and turned with the ignition OFF, the vehicle's mark could devi-
ate from its actual orientation. The vehicle's mark could also 
deviate even after the vehicle has exited the parking area.
(9) The vehicle's mark could deviate  from its actual position if the 
vehicle is driven using tire chains or snow tires on a snow-cov-
ered road or on a mountainous road.
Legacy_B2462BE-A.book  Page 99   Wednesday, April 22, 2009  5:32 PM 
         
        
        
100 NavigationGeneral Information(10) The vehicle's mark could deviate from its actual position after 
the tires have been replaced.
(11) While driving on a public road, if an expressway that is under  construction travels over the public road, the position mark of  
the vehicle may be indicated on a different road.
(12) If other electronic devices are installed on the instrument panel , 
these devices may adversely affe ct the GPS signal communica-
tion and the position of the ve hicle may not be indicated cor-
rectly.■ How the vehicle position is detectedDetecting the vehicle's position through the GPSGPS stands for "Global Positioning Sy stem", which is a system used for 
detecting an object's position through  the use of satellites of the U.S. 
Department of Defense.
Radiowave signals from three or more satellites are received by the 
navigation system, which utilizes th e principle of triangulation to 
detect the position at which the radiowave signals are received.
When the navigation unit is receiving the GPS radiowave signals, a 
"GPS" mark will appear on the map screen.
Detecting the vehicle's position through self-contained naviga-tionSelf-contained navigation is a system that detects the vehicle's posi -
tion by calculating the vehicle's  driven distance and turning angle 
though the use of various types of  sensors that are mounted on the 
vehicle. Through the use of self-contained navigation, the vehicle's pos
ition 
can be detected even in an area  where the GPS radiowave signals 
cannot be received.
Making corrections to the detection of the vehicle's position 
through map matching
• In map matching, the position information resulting from the 
detection of the vehicle's position  and the locus of the travel of 
the vehicle up to the present are constantly compared to the 
shape of the roads on the map in  order to correct the vehicle's 
position mark to the most appropriate road.
• If the vehicle is driven on a road  whose actual shape differs from 
its map data, the vehicle's position mark on the map could devi-
ate from its actual position.
Occasionally, the correction of th e vehicle's position mark to the 
actual road on the map can be observed, particularly after the 
vehicle has turned at an intersection or has exited from a parking 
area.
■ Accuracy of the route guidanceThe conditions listed below do not indicate a malfunction.
(1) The guidance might prompt the  driver to drive straight even 
though the vehicle is being driven on a straight road.
(2) The directional guidance could display multiple place name s.
(3) If the vehicle makes a turn at an intersection before the guid ed 
route, the wrong type of voice guidance could be outputted.
(4) The guidance might not be ou tputted while the vehicle is mak-
ing a turn at an intersection.
(5) The system might not be able to search for the proper route .
Legacy_B2462BE-A.book  Page 100  Wednesday, April 22, 2009  5:32 PM